Exactly finally somone who knows about the holes in pulley
@elitecystuning3 ай бұрын
Amazes me how many ppl don’t realize those three holes are for a puller to put bolts threw and pop it off lol
@user-gx8cj9re4k3 ай бұрын
So im the only struggling 😅help
@russelladkison44673 ай бұрын
Here's a tip for the pulley puller...don't just tighten it down until you deform the pulley, just tighten so it no longer moves. Then, strike the Pulley shaft with a hammer, which will force the shaft downward and loosen the puller. Next Tighten the puller, rinse and repeat until the pulley is loose enough to pull off with hands. Easy peasy and no deformed pulley in the process. Hope this helps!
@sherrischneider27943 ай бұрын
Where is the PB blaster?
@HK_96705 ай бұрын
I have exact same result as you - Aquapel wins hands down. Someone says that you must prepare the windscreen correctly for RainX but I can tell you that I took so much time and different ways in preparing for the RainX but the result is the same as yours. For Aquapel, I don’t need to prepare much - just a normal car wash and use claybar to clean the windscreen before applying Aquapel. Aquapel works very much better. The problem for me is that there are a lot of fake Aquapel outside. From Aquapel website, you can also see that they don’t sell outside of USA because of government export control. It is not easy to buy if you are not in USA.
@VoiresGarage5 ай бұрын
I recently bought a 2003 Honda Civic LX. The engine was swapped with one that has v tech but the V tech solenoid was never plugged in. I checked the wiring harness and its the old harness from the non V tech car. I cant get the car to start. Any way to get the car running with out having to swap the harness since I don't really care if it has V tech or not. I did also notice it has a crankshaft position code. Im gonna start with that.
@Boondocker1016 ай бұрын
Good video? Nice job presenting! I’m having the exact same issue. Thanks for the great tip!
@privateassman88396 ай бұрын
Just what I needed. I was stripping and cleaning a Lincoln Weld-PAK 100, and this helped a ton. It had feed issues when the whip was slightly curvedd, so I figured the liner was encrusted with the previous owners gunk 😁
@ACF6180T7 ай бұрын
I've got a 2018 M-F 1526; It's been a really great tractor so far, But I can tell you that I missed those 3 zerk fitting as well; Thanks for the tip, & video, & I'm going to make sure that I hit those ASP. Oh & I haven't had these issues with mine yet.
@robertjanowski7108 ай бұрын
You didn’t get it in that way did you. lol
@skipjagger8 ай бұрын
I'm sorry, which way do you mean?
@Mike-su8si9 ай бұрын
The pulleys i done doesn't have holes but the puller gets it anyways. You said the spindles have the holes but i know you mean the pulleys
@rickyrich385510 ай бұрын
You said you ordered the engine from Japan because it's cheaper but dude at least share how did you order it, a website or something.
@aymana861611 ай бұрын
Thank you 🙏
@aymana861611 ай бұрын
It’s easy i thought so hard to get in
@skipjagger10 ай бұрын
I was so surprised myself, that's why I wanted to make a video!!!
@jeffc6059 Жыл бұрын
LMAO. The best thing to but on your windshield is NOTHING. Use a good glass cleaner/polish product with a rotary or orbital buffer and heavy cut foam pad. Wipe clean. Then use glass cleaner. Make sure your windshield wiper blades are in good condition. Putting a water repellent on your windshield seems like a cool idea to the average Joe but any person knowledgeable in Car Detailing will roll their eyes at you. It also cracks me up when people say how good it works without using their windshield wipers. Um, there's a reason the car manufacturer installed wipers on your car. You might want to use them for what they were intended for. The water repellent is best used on your side windows and mirrors which have no wipers. The back window is also not as big of a mistake as the front because the wiper blade is so small.
@chumark54 Жыл бұрын
Such a great idea!!
@romanstar7550 Жыл бұрын
REAL HELPFUL THANX
@maxxautomotive Жыл бұрын
Hit it with your purse
@brendanmcavoy6639 Жыл бұрын
Im dealing with this right now. 05 LX auto. Put a JDM d17a in my car but theres no lower 02 sensor on the engine harness, has to be pinned in which is going to be a wicked pain. Also there doesnt seem to be a plug on the EX harness i bought for it so im lost now. Transmission works fine, no issues. Anybody got any suggestions about the 02 sensor and the EX harness with no plugs for the vtec solenoid?
@gwp1ohio Жыл бұрын
fantastic, I have a 1533 need to convert for grapple... and 3rd function
@brandonpanduro3839 Жыл бұрын
If I have a vtec engine can I non vtec transmission work?
@MrZipperhead16 Жыл бұрын
There's this stuff called penetrating oil..... Maybe give it a try next time.