DIWHY.LIFE

Пікірлер

@superanalysis770 4 күн бұрын

Can you please make video of smooth 5 battery replacement

@deathninja4724 11 күн бұрын

Good stuff sir thank you 🤘

@Guccigrizzly 13 күн бұрын

It’s a machine piece

@Bobby_Snoof 19 күн бұрын

I'm happy to have found your video a little by chance. I have to admit that I've been completely in love with Minidisc for a few years now. I'm glad to see that it still surprises and interests people. I own several dozen players and a few MD decks.(I also own a dozen albums, but the prices are too high. I only buy them when I can find them for less than 30 or 20 euros.) I'd like to add some information about the anti-skip system and the buffer: technology has evolved a lot over time, and more recent devices, like the Sharp MD-MT270H released in 2003, spin the disc for about ten seconds, and then the player runs for about 1min30s without needing to spin the disc. In short, I've never had any problems using it while jogging!

@DIWHYDOTLIFE 19 күн бұрын

Thanks for the additional info! Check out @technostalgism they have some cool vintage audio content.

@Bobby_Snoof 19 күн бұрын

@@DIWHYDOTLIFE Thanks for the info. I already follow him on insta ;) Happy New Year.

@neelaveronte745 20 күн бұрын

DVD (PlayStation 2) is still using in 2020... computer. CD audio popular among Mazda RX-7 and Nissan Skyline GT-R community (example). What isn't retro for you? Thereby.

@FisnikRashica 20 күн бұрын

Hi! Great video <3 can I make my 3D scans to AR avalible to the public?

@DIWHYDOTLIFE 19 күн бұрын

Yes, when you upload to SketchFab you can make your scans downloadable for free or for a fee. If you make them free, SketchFab will give you upload credits keeping the whole process free (their way of encouraging uploads and free downloads to grow community).

@skyzircon66skyzircon07 22 күн бұрын

I don't use my seat belt either when i ride on my E-Bike! THUG. LIFE...

@DIWHYDOTLIFE 22 күн бұрын

🤣

@jonnf.5477 22 күн бұрын

Wha t products

@nyandorogonhi6075 24 күн бұрын

Wise plan

@logojeiemmanuelamonzem2520 28 күн бұрын

I happy for you and I will really need some too. Not as free but get to know the cost and see if I can afford for myself as well❤

@DIWHYDOTLIFE 28 күн бұрын

I hear that! A set like this is pretty expensive, but they sell everything individually too, so if you can’t afford it all at once you can start with the basics and add from there. 👍

@simoharjane7823 28 күн бұрын

Help ! Where can I get a charger ? And what it is called . Need one for this Ebike ! Thanks

@DIWHYDOTLIFE 28 күн бұрын

Did you try contacting Retrospec support?

@leobesa2887 Ай бұрын

Speed comparison vs the one you previously used?

@DIWHYDOTLIFE Ай бұрын

With less vibration physics says the smooth road tires are faster but I can’t “feel” the difference.

@eBoard3R Ай бұрын

🤙🏽⚡️🤟🏽⚡️👌🏽

@hectoraltamirano1455 Ай бұрын

Very useful video. My only problem is that I only get the sound, not the image. Any suggestion? I bought the same convertor.

@DIWHYDOTLIFE Ай бұрын

@@hectoraltamirano1455 did you add the USB device as a video input in OBS?

@JazzyJabbz Ай бұрын

Man. Why do the prices vary so MUCH with these panels?

@DIWHYDOTLIFE Ай бұрын

@@JazzyJabbz no idea, the one I dumpster dove was more expensive than the ones off Amazon but they’re nearly indistinguishable.

@joshuaespinosa8566 Ай бұрын

So can I just drill it into gypsum?

@DIWHYDOTLIFE Ай бұрын

Yes, you’ll likely hit a stud at some point, but they’re pretty light and will stay up with a handful of screws in the drywall.

@aznycts Ай бұрын

too Expensive 😆 . Maybe for small space Design. 16x16 in but not the Whole frikn wall.

@DIWHYDOTLIFE Ай бұрын

Totally agree.

@tharunkumarvk99 Ай бұрын

One question though. Does it light up even when connected to a charger(power bank). Or it lights up only when disconnected from the charger. It would be great for camping/trekking if it can be turned on while connected to a power bank or something.

@DIWHYDOTLIFE Ай бұрын

@@tharunkumarvk99 I’ll test it…

@Mafioso1731 Ай бұрын

So whats the conclusion@@DIWHYDOTLIFE

@DIWHYDOTLIFE Ай бұрын

⁠Not quite as bright as the ad makes it out to be, but it’s a bright little keychain. The bottle opener saved me a few times as well. I think it’s worth it and then some.

@DIWHYDOTLIFE 21 күн бұрын

I just tested this and it will run off of USB when the internal battery is depleted. The internal battery lasts a really long time too, was surprised at how long it took to run down.

@tharunkumarvk99 21 күн бұрын

@@DIWHYDOTLIFE I bought one in the mean time. It ran for around 10 minutes(brightness loss after 5 minutes) after full charge. It was rated for 6watts. So 500 lumens approx. It was advertised for 1000 lumens. It was able to run off of usb at maximum brightness initially. But after some time, it reduced it's brightness automatically due to excess generated heat I think.

@rrpiva Ай бұрын

Thanks for the video, it did help me. Don't mind on comments that are non constructive. People prefer to complain than see the good side that you are doing this for free to help others. Appreciate it. Thanks! 😊

@DIWHYDOTLIFE Ай бұрын

@@rrpiva thank you, right?

@georgeexy4754 Ай бұрын

Hi. I am tearing my hair out here. My USB device or anything I have installed wont show up in my menu. Can you help ?

@DIWHYDOTLIFE Ай бұрын

Possibly. Let’s backup a bit. Mac or PC? Are you using a similar capture device? Are you using OBS? I’m assuming you’ve already tried restarting the computer and running any updates?

@roderickadrian1285 Ай бұрын

Is there any decrease in product quality, as long as you use the product? Like battery life, sound quality, connection between receiver and transmitter. Thanks btw.

@DIWHYDOTLIFE Ай бұрын

The great thing about these mics is that they use AA rechargeables so you don’t have to worry about the internal battery bricking it. The Senheiser actually stopped working suddenly about a year ago. Apparently the FCC took back the radio frequencies it operated on. To be fair it wasn’t Senheisers fault and they did give me a few years notice that it was going to happen.

@kenblair2538 Ай бұрын

Great video, one question, unless I missed something, once the mp4 files are in my PC, can I burn to a DVD ? Thanks so much . KB

@DIWHYDOTLIFE Ай бұрын

While DVDs are not a great way to archive data (shelf life of about 10-15 years), you certainly could burn the .mp4 files to a DVD which can be played on a computer, some newer DVD players and PS3, PS4, and PS5. I wouldn’t recommend making a video DVD due to limited authoring software options. I did recently find DVD Styler which looks dated but sufficient for Mac and PC: www.dvdstyler.org/en/

@videocaptureguide 4 күн бұрын

If you'd like to make a DVD-Video disc (the kind that you put into a DVD set-top box and it just plays) then you will need MPEG-2 video files instead. But more and more people have smart TVs where you can insert a USB drive and it will play the MP4 files.

@chrishainstock330 Ай бұрын

Putting your laptop in front of what you’re doing is not very helpful - we need to see what you’re doing with cables and your right hand covers a lot of what you’re doing in the side view

@DIWHYDOTLIFE Ай бұрын

So sorry about that, I’ll try to be a bit tighter next time. Luckily it’s pretty easy, yellow one is video and white is audio. Thanks for the suggestion 👍

@TheCoastofMagdala Ай бұрын

I’m currently in the process of doing this . I got pvc instead of abs since my store didn’t have any. It was a little more expensive but I’ll be making a video of the struggles I had with making this. It seems simple but there were some challenges.

@rochellescrivener961 Ай бұрын

What is your height and weight if you don’t mind sharing? I’m trying to order for my son who is 6’1 and about 195lbs. L of XL ?? lol

@DIWHYDOTLIFE Ай бұрын

I’m 6’ and 180lbs. Hmm that’s right on the line. See if he prefers his shirts on the tighter or looser side. I feel like L may be a touch tight and XL a bit loose.

@billgates3699 Ай бұрын

‼️Step 1: place VHS into JVC VCR Step 2: connect the FireWire port from the VCR to your Mac Step 3: use the capture software of your choice and press play on the VCR Wow. Way easier and better quality.

@videocaptureguide 4 күн бұрын

A DV25 digitization can outperform a mediocre SD capture device. However, I recommend a better SD capture device that saves to a lossless codec like HuffYUV or Lagarith. I wouldn't recommend digitizing directly to MP4.

@hulkhatepunybanner Ай бұрын

Now I can archive tons of 80s and 90s porn. Every generation should know of Tracy Lords. Thanks, man!

@orihalcon8693 Ай бұрын

While it "works," the quality is obviously not up to par with other methods out there for a little more expense (or it could be that the test tape you have there is just very poor I suppose as VHS can and should look a lot better than that in most cases. Would agree with others that you get what you pay for here. My suggestion would be following this tutorial here with one of their recommended capture cards, either the Startech or Datavideo options: kzbin.info/www/bejne/qpyQn2p_odeLf5Y I'd watch a followup video where you compare the results you got with that capture setup to what's recommended Oldskool PC's video. I'm not saying his method is the best possible way either, but it's probably decent for the budget involved. Next upgrade beyond that would be using a VCR with built in line TBC or adding a DMR-ES10 or ES15, or you might also try the DV capture method via DV camcorder passthrough or using something like the ADVC-100/110. All are decent budget options that should blow the quality of this out of the water and are worth seeing for yourself.

@DIWHYDOTLIFE Ай бұрын

Great suggestions, I would enjoy doing a side by side…

@DIWHYDOTLIFE Ай бұрын

My original plan was to use my minidv camcorder and do video pass-thru but I made the mistake of opening the tape door and now it’s stuck in an endless loop trying to open the tape carriage. I’m not that confident I can repair it but I’ll give it a shot.

@folladordeprostis Ай бұрын

So you buy it online and is not fully assembled???wtf

@DIWHYDOTLIFE Ай бұрын

One thing I kinda wish OBS could do is pause recording instead of simply stopping. I mistakingly stopped recording thinking the tape was done but it wasn’t so now I have multiple videos instead of one complete file. I used to have a free MPEG utility that could merge them together, I’ll try to find it again and try to merge them.

@videocaptureguide 4 күн бұрын

Mpg2Cut2 can help with that.

@vintageceilingfans Ай бұрын

Less than 15 bucks? You get what you paid for.. Which means this video is useless.. A $15 device isn't going to properly convert video tapes to MP4 without glitches and frame drops..

@DIWHYDOTLIFE Ай бұрын

So far no issues, just concerned it make brick itself at any moment. One of my tapes was 2 hours and the video is great, sometimes these cheap devices can get the audio and video out of sync especially during long captures, but nothing negative to report yet. I have like 6 more tapes to record so I’ll report back 🤞

@JoshOsRocks Ай бұрын

Would it be better to use a vcr with hdmi output and use a hdmi capture card? Those hdmi output vcr upscales the vhs tape to 1080p. This seems to be better for modern displays.

@DIWHYDOTLIFE Ай бұрын

@@JoshOsRocks I didn’t know there was such a thing. Upscaling an SD signal off of VHS isn’t going to improve the image, it will simply make the videos larger in size and file size. If you can find a cheap VCR with HDMI output, it would be a more future-proof way to go as HDMI isn’t going to fade away anytime soon, so from that standpoint it does make sense.

@DIWHYDOTLIFE Ай бұрын

@@JoshOsRocks I’m also not sure how it would handle 4:3 video. It may add black bars to the sides to maintain widescreen format which may not be ideal.

@vintageceilingfans Ай бұрын

There is a device out there that upscales to 1080p at 60fps... It's called Cloner Alliance Pro.. It's going to be much more than $15.. These cheap dongles like the one in this video isn't going to properly transfer video tapes without adding artifacts and dropping frames..

@DIWHYDOTLIFE Ай бұрын

@@vintageceilingfansBelieve me, I’m very skeptical about stuff like this but it hasn’t disappointed me yet. I chose it based on the positive reviews and figured it was worth a try. I was willing to spend 10X but I just couldn’t find anything from Blackmagic or some other reputable brand.

@DIWHYDOTLIFE Ай бұрын

@vintageceilingfans The Cloner Alliance Pro looks pretty good. I’ll get it if this cheap thing starts to disappoint me. 👍

@jud2820 Ай бұрын

I have SMOVE model number SMVMBL1 and there is no screw in the bottom, any suggestions?

@DIWHYDOTLIFE Ай бұрын

Does it have a sticker concealing or sometimes it’s hidden in the tripod hole?

@jud2820 Ай бұрын

@@DIWHYDOTLIFEthere is no sticker covering the opening, just the threads for the base

@PygmalionFaciebat Ай бұрын

I would recommend to set a higher resolution. Pal Secam was 525 lines, and not 480. To choose 480 literally means: to make compromises in quality. Sure, i know, that those 525 very likely get distorted by the analog nature of the VHS. But still. That distortion, plus 480p are additional levels of quality loss. Its not necessery to put as much quality-loss-levels as possible on each other. Espescially when the connection isnt S-Video.

@seba.d Ай бұрын

lol.. half a video over and guy just realizes he needs cables? wtf. thank you for the video but ne.. stop.. just stop

@DIWHYDOTLIFE Ай бұрын

It really threw me for a second! 🤣

@levelintent Ай бұрын

I have wood floors, the pipes won't slide as easy. What's the alternative

@DIWHYDOTLIFE Ай бұрын

Add felt to the bottom of the pipes. You can try little sticky pads or you could spray mount black felt to the bottom.

@22ERICSHELLY Ай бұрын

I would love to get this. I have some tapes like our wedding on VHS that I want to make digital. I didn't understand half of what you were talking about though. I guess it shows my age! Lol May Jesus continue to bless you and your family

@DIWHYDOTLIFE Ай бұрын

Well the good news is everything is under $20 so if you can't seem to figure it out, you're not broke and defeated. Feel free to ask more questions here or you can email me from my profile page: www.youtube.com/@DIWHYDOTLIFE (click the more link in the channel description).

@22ERICSHELLY Ай бұрын

@DIWHYDOTLIFE thanks. I think I will order it. You might regret offering your help! 😆

@22ERICSHELLY Ай бұрын

How much would you charge me to put mine on DVDS

@DIWHYDOTLIFE Ай бұрын

@ shoot me an email: [email protected]

@vintageceilingfans Ай бұрын

I would not.. .. at $15 you get what you paid for..

@ValerieShaddix Ай бұрын

Try charging the light fully before using. It is bright.

@_rider_5857 Ай бұрын

I thought it would hit tight on the biceps

@DIWHYDOTLIFE Ай бұрын

Ok I need to hit the gym 😀

@javierandresgallegocaicedo6466 2 ай бұрын

I’m 5’11 what should I buy bro?

@DIWHYDOTLIFE 2 ай бұрын

Get the L

@javierandresgallegocaicedo6466 2 ай бұрын

Would u give me the link where to buy it I looks awesome!

@DIWHYDOTLIFE 2 ай бұрын

Please use the link in my description to help keep my channel going!

@vlonered-6925 2 ай бұрын

i tried it got worse after i took it apart like 2 times my right stick won’t even go down. on game screen it stays up going in circles

@vlonered-6925 2 ай бұрын

ye i tried it the 3rd time nd i just lost hope ima just buy a cheap controller i cant keep buying 60 to 70+ controller everytime they f*ck up.

@DIWHYDOTLIFE 2 ай бұрын

@@vlonered-6925 it’s possible the fragile wire sensors have either worn through or got damaged when you replaced and closed the little doors. I did find some parts on Amazon: www.amazon.com/Controller-Thumbsticks-Replacement-Compatible-Android-iOS/dp/B09B3SRKS1/ref=asc_df_B09B3SRKS1?mcid=f4ad96b3f3c832ebba82702bd35d7bfe&tag=hyprod-20&linkCode=df0&hvadid=693680071349&hvpos=&hvnetw=g&hvrand=17657812005867724506&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9061195&hvtargid=pla-1948298950973&psc=1

@Trump2024Kentucky 2 ай бұрын

60% cotton 40% polyester

@joeyhillers9460 2 ай бұрын

This was actually recommended to me by Retrospec for my Judd mid drive build. Congrats

@techbiotic8831 2 ай бұрын

thats genius!

@JungleGeezerwcat 2 ай бұрын

Thanks! I didn't think they were as bright as advertised. I'll stick to using my cellphone.

@darrenbivings4227 2 ай бұрын

This is pretty much how V-flats were invented. Someone got the bright idea to tape 2 "48 x 96" inch foamboards together and voila, V-flats. And now, you can't get them for less than $150 per board. I created my own system with 1 inch PVC Pipe, and I can change the fabric or surface to whatever I want. Basically 2 "48 x 96" Scrim frames with changeable fabrics. But I do love this idea as well. Thank You!

@TIMBERxTrees 2 ай бұрын

I’m glad these don’t look like crap. I took them up on an 80% sale for work shirts for my company. They looked better after wash, shrank nicely.

@DIWHYDOTLIFE 2 ай бұрын

Right? Pretty good, just be ready for the onslaught of texts and emails.

@darrenbivings4227 2 ай бұрын

Can you measure the output of this set with a light meter? That's valuable information. LED's come in many options and power Lux Levels.

@DIWHYDOTLIFE 2 ай бұрын

I actually did recently buy a light meter. I got it to tell me light temperature but I think it tells light brightness too. I’ll do some tests and try to figure out if there is a standardized distance to measure lux.

@darrenbivings4227 2 ай бұрын

Once again, Thank you for your DIY Originality. "To Create is Devine" I'm trying to DIY build a powerful enough LED that I can put into my Photo Softbox as a modeling light with Flashes or Speedlights. The Ring shape does seems to be the best shape in order to spread the light evenly through out the Softbox. The Current LED Ring lights are just not powerful enough to give me enough light after the Diffusion after 3 feet At ISO 100. Since 99% of the Speedlight / Flashes don't come with Modeling lights built into them, I need an LED Solution that can kick out enough Light / LUX - at about LUX 5120 - 7200. Do you have any ideas about this? Or am I ask too much for a DIY project?

@DIWHYDOTLIFE 2 ай бұрын

Yeah you’re going to need something really bright if it’s going behind the diffuser. Is your light box square? I could see maybe making a thin frame around the front of the light box and using strip LEDs? Undiffused they should produce enough light, and I’m fairly certain the flash will eliminate most of any hard shadows the LEDs may produce.

@darrenbivings4227 2 ай бұрын

@@DIWHYDOTLIFE That's actually a good idea. I've been concentrating primarily on the back of the softbox instead of the front. I'm not too worried about any shadows from the LED seeing how the difference is going to be at least a 4 stop or greater difference in the light ratio at ISO 100 - 200. Leds start to expose at the higher ISO's. I've recently discovered that there is a AF Assist Beam on my Flash/Strobe trigger that sends out a crisscross pattern to help my camera autofocus in low light situations. But I would still like to create an LED Modeling light to help close the Iris and Pupil in the eyes down for better headshot photos. Large black Pupils isn't very attractive in headshot portraits. The LED light will help with that and help me know what the quality and of the light will be. How the Shadows fall. Modeling lights are starting to show up in good quality Flashes these days. I'm not ready to reinvest in newer shit just because. And besides, DIY Shit is Better. 😎 Right?

Ең жақсы KZbin

Пікірлер