It's the same as changing the bulb on the mirror, most videos tell you to remove the glass.... This is unnecessary, just remove the cap
@ricstanley8769Ай бұрын
I used a nice simple and quick
@davidfowlerphoto2 ай бұрын
Would be the perfect video if you’d showed taking it off as well.
@MrTurbohornet2 ай бұрын
The other short video shows how to remove it.
@alexeysharikov29423 ай бұрын
Не делайте так. Снимать нужно сначала зеркальный элемент,а потом крышку легко от щёлкните. Если этого не сделать ,сломаться крепления (направляющие петли)
@kinguponarrival82374 ай бұрын
🙏🏽 just popped mines off in under 2 mins. And no damage. I refuse to remove the mirror. 😂
@user-uu1km3iv9q4 ай бұрын
What is that red tool his using called man
@MrTurbohornet4 ай бұрын
It's just called a trim removal tool.
@tyquarnn4 ай бұрын
👍🏾👍🏾
@ridgleyglidden25075 ай бұрын
Best way to do it
@MrAvant1237 ай бұрын
i wouldnt advise this ! Better to pop the mirror off and release the cover from behind !!!!!!
@MrTurbohornet7 ай бұрын
Lots of people have broken the glass by doing it that way, check out the price of glass!
@TinoCani8 ай бұрын
Thank you
@user-qt1tr5ej2m8 ай бұрын
What’s the specs on both?
@MrTurbohornet8 ай бұрын
A35 was 4 wheel drive and 400hp I believe, m140 2 wheel and about 540hp.
@rodolfocallahan44588 ай бұрын
'Promosm' 😣
@528hrtz9 ай бұрын
took me 2 minutes to do both side.. amazing video bmw dealership said they would charge me $200
@user-dn2tm1kb4z10 ай бұрын
그립하나 제대로 잡을지 모르는 그냥 초보운전;;;
@gary6369310 ай бұрын
Audi wouldn't do this. lol
@MrTurbohornet10 ай бұрын
🤣🤣🤣
@gary6369310 ай бұрын
@@MrTurbohornet /smile
@Love-Arsenal-Hate-The-Opps10 ай бұрын
Hope they're ok 😮
@MrTurbohornet10 ай бұрын
They walked away although they were a bit bruised.
@MrSuperG10 ай бұрын
He got scared
@marcobrownstone10 ай бұрын
That's one way. LOL
@huskyduck548310 ай бұрын
Wow
@melvinhill6726 Жыл бұрын
Is it me or is it everyone losing the passenger side mirror for some odd reason on a BMW😆🤣🤣
@c6seylive734 Жыл бұрын
First video I saw was of a guy who was taking the mirror out and then he said risks were breaking it so be careful, did some more hunting and found this. Took me a harder time to put the new ones on then to take the old ones off😂😂
@c6seylive734 Жыл бұрын
This works for f30 3 series 2014 328i
@EmpraMcdade Жыл бұрын
Nice, ordered m3 mirror caps and they should he here this weekend, plan on doing what you did here. I always thought you had to remove the mirror before hand.
@MrTurbohornet Жыл бұрын
Some people do without issue but a lot of guys end up breaking the glass..... including me. Check out the price of the original glass! I found it easier to pop the cover off.
@EmpraMcdade Жыл бұрын
@@MrTurbohornet yeah I feel you, ima just do what you did to prevent the glass from breaking.
@SENY_MOTOSTYLE Жыл бұрын
Красавцы) рассказали бы хоть секрет как это сделать)
@kieronfoster9400 Жыл бұрын
Just watched 5 mins job done just need new wing mirror glass 👍from previous attempt 😢
@MrTurbohornet Жыл бұрын
Yes, the mirror glass breaks very easily, and genuine bmw replacements are not cheap to buy. It's always easier to pop the cover off like in the video.
@felixz24732 ай бұрын
omg same😢
@dergourmet3217 Жыл бұрын
Endlich mal ein Video ohne dummes unnötiges Gelaber...danke dafür!
@skillzv Жыл бұрын
What is the name of the tool you used to remove the cover?
@skillzv Жыл бұрын
@@MrTurbohornet Thanks
@cb500 Жыл бұрын
ridiculous one gets off to a better start than the other and that's it.
@MrTurbohornet Жыл бұрын
A wins a win in my book.....you snooze you lose😂
@LoveNaturee. Жыл бұрын
I’ve just changed mine doing the same thing and it was too easy thanks for the video
@alisherfakhradov9638 Жыл бұрын
Вклинил и заглох
@radsdad12 жыл бұрын
Liking your footpeg mounting brackets.
@Can-Am19892 жыл бұрын
What powers the blinker? Is it led or light bulb?
@MrTurbohornet2 жыл бұрын
Led.
@benhattersley67372 жыл бұрын
Mg flasher smokes both these tunes 😜😈
@benhattersley67372 жыл бұрын
@@MrTurbohornet what’s your quickest 100-200kph on dragy?
@garrywilson74652 жыл бұрын
Both Stock.....?
@MrTurbohornet2 жыл бұрын
Gtr is 1000hp 4wd and m140i is 2wd Mhd stage 2 approximately 440hp. Left lane was doing half mile and right lane quarter mile (quarter mile marker can be seen on the right)
@DippinItUp12 жыл бұрын
Interesting outcome looks like the MHD maps are stronger for just being stage 2 vs bm3 stage 2+. How have you liked the mhd maps? Looking to get a tune on my b58
@benhattersley67372 жыл бұрын
No way is a stage 2 MHD stronger than bm3 stage 2+, MHD can barley get sub 8 100/200kph and bm3 2+ are low 7. If you want a fast map for the b58 then get MG Smasher! 👌 Mhd is the weakest out of the lot.
@ganuv2 жыл бұрын
Not a fair race , between stage 2 and stage 2 + it’s nearly 40 hp difference,
@MrTurbohornet2 жыл бұрын
I doubt it's 40hp difference. Although the white car beat me on that run it couldn't beat my best time of the day or my 1/2 mile time/speed.
@Addselwyn2 жыл бұрын
Which Ron fuel map is the mhd car using
@abderrafiieddakille41173 жыл бұрын
To good
@charlesnatanael41383 жыл бұрын
Prepare-se xj6 turbo Renato Garcia
@colinbosgraaf3 жыл бұрын
It is beter to unclip the mirror it zelf and push the clips together to prevent breaking them.
@SalttooCS2 жыл бұрын
Broke both my mirrors doing that 😂🤡
@professorchaos7865 Жыл бұрын
@@SalttooCSman I did the same fucking thing. Now I’m looking for mirrors and they are expensive af.
@podjeyfa Жыл бұрын
@@SalttooCS unclipping mirrors or like this on this shorts?
@SalttooCS Жыл бұрын
@@podjeyfa not like on the video
@Teebiskit9 ай бұрын
Yea I don’t trust myself to remove the mirrors.
@robcut914 жыл бұрын
Love the boosted hornet mate, I know I'm way off the pace on this one but I'm starting a build of my own on the hornet. Just wondering where your oil feed line runs from? Is that it on the right side crank case?
@ricardo39484 жыл бұрын
Kkkk
@larscadosch66875 жыл бұрын
its dripping tho :/
@BryanSRR5 жыл бұрын
😑😑😑😑😑😑😑😑😑😑😑😑
@roycropper35295 жыл бұрын
nice filas
@AdamGTS3507 жыл бұрын
Hi Mate, love the bike. I'm half way through a turbo 900 hornet build myself and was wondering if you had to modify the throttle bodies at all to run boost? Also, how did you tune the bike, PCIII?
@MrTurbohornet7 жыл бұрын
AdamGTS350 Throttle bodies and injectors are standard Hornet items, tune is done by pc3. I've also added an ignition control module and a gm 3 bar map sensor.
@AdamGTS3507 жыл бұрын
Thanks for the reply mate. Just wondering how much boost you are running and have you done any engine mods to compliment the boost, ie decompression plate, valve springs or head studs? Perhaps you have a build thread on a forum somewhere you could share with us?