Currently making a Greatsword variant, great tips!
@helenwright68402 күн бұрын
Fantastic tips. Familiar with using a dremel but about to use it on eva for the first time. This has been invaluable in saving time, frustration and materials. Thank you.
@fadumadiss15578 күн бұрын
45
@fadumadiss15578 күн бұрын
Have fun watching
@fadumadiss15578 күн бұрын
Scientists
@cakyas184911 күн бұрын
aku kurang ngerti bahasa mu. 😂😂😂😂 tapi aku suka
@stewartbruce890213 күн бұрын
Loved your tutorial. Been using contact cement for 40 years. I learned two valuable lessons about putting the pieces together while wet, and using heat gun to undo the parts. Can I use acetone to thin contact cement (Dap weldwood brand).? Thank you for your lesson in the you tube classroom, and all the best from New Rochelle N.Y.
@BlackSheepProps12 күн бұрын
Hey! Glad the video helped. Yeah, I periodically use small amounts of thinner to make my cement less thick so it spreads easier. But not too much or it will cause the cement to separate and it gets weird.
@boofuls14 күн бұрын
Barge cement is like rocking 🐎💩..you can't get it in the UK.. great video BTW
@BlackSheepProps14 күн бұрын
Thanks! Yeah, Barge is amazing.
@johnnyboy58726 күн бұрын
thanks for sharing bro
@BlackSheepProps25 күн бұрын
No problem dude, glad it was helpful!
@velogonza_skienАй бұрын
What kind of glue did you use?
@BlackSheepPropsАй бұрын
Hi! I use mostly contact cement, but sometimes I use super glue for small pieces. Check out the videos on my channel, there is a video on the basics of contact cement and every build is filmed step by step so you can follow along.
@stellanjohnson9178Ай бұрын
yo just curious but what foam exactly do you use? and also what is that bonding cement that you are using to stick pieces together? im just getting started in the hobby and i want to make sure that im working with the right materieals.
@BlackSheepPropsАй бұрын
Hey! I use EVA Foam and Barge Contact Cement. I also use super glue for tiny stuff. Go to my channel and check out my videos on EVA Foam basics, Contact cement basics, and all my tips videos. Also, you can watch step by step videos on my channel to see how to do every step. Have fun!!!
@dreadclown9977Ай бұрын
What kind of pens do you use to mark your foam? My sharpies and paint pen die almost instantly
@BlackSheepPropsАй бұрын
Hi, I use Recollections Medium Point Silver Markers from Michaels.
@themattmcclellanАй бұрын
6 minutes in and nothing is happening
@leapforwardcaАй бұрын
@BlackSheepProps What heat gun is that?
@BlackSheepPropsАй бұрын
It’s a Wagner Furno.
@UniversalHuman7Ай бұрын
Great video
@pest-alt-accountАй бұрын
About eva foam mats, what is the recommended thickness? Im making a gabriel cosplay and it looks like i would need a lot of foam in different thicknesses, im thinking about using 2 layers of the same foam but what would be the recommended? Thanks
@BlackSheepPropsАй бұрын
Hi! you can totally use layers to get the thickness you want. A lot of my prop build videos on my channel show layering up pieces to get the thickness I wanted.
@pest-alt-accountАй бұрын
@@BlackSheepProps Thank you!
@kylerschenk520Ай бұрын
I know this video was 4 years ago, but maybe somebody will see this. But why didn’t you want to plasti-dip the glove to color match the rest of the gauntlet?
@BlackSheepPropsАй бұрын
Hi! I don’t think you can plasti-dip leather, I think it would crack after it dries.
@aprilblackregentart6647Ай бұрын
That barrel wrap was terrifying!! I love all the layers on this!
@BlackSheepPropsАй бұрын
YES, it was!! Yeah this thing is mega-layered.
@daisyirisАй бұрын
How long do I heat it and how hot?
@prettylagoon2 ай бұрын
I have ecg economy heat gun. It wont remove primer from wood it seems. It takes forever to heat paint
@ByTheAllSpark2 ай бұрын
I just started the video, and is there a more accessible way of making this, without needing 48 mm eva foam? Like, can I stack foam to make it?
@BlackSheepProps2 ай бұрын
Hey!! Absolutely stacking foam is ok. Whenever you don’t have thick enough stuff just layer it up! Have a great build!!
@shitheadwootton2 ай бұрын
he dremels ya at the end of the video.
@aprilblackregentart66472 ай бұрын
The shape of these make me think of Knuckles' hands lol. Loved all the sculpting on this one!
@BlackSheepProps2 ай бұрын
Yeah, these were a small build but they were fun!
@neoteraflare2 ай бұрын
And I just found this channel :(
@BlackSheepProps2 ай бұрын
Yeah, I was sad when it ended. I loved those 3 years so much. I’ll leave the channel up so people can still watch all the videos. Glad you like it!!!
@aprilblackregentart66472 ай бұрын
Do you happen to recall where you got that plastic tube for the glass canister part??
@BlackSheepProps2 ай бұрын
Mmm, I think I ended up getting them from Uline. www.uline.com/Product/Detail/S-21975/Clear-Tubes/Clear-Plastic-Tubes-2-x-8 They also have clear pvc tubes of all diameters on Amazon. www.amazon.com/Rigid-PETG-Tube-Plastic-Tubing/dp/B09KRYDVMC/ref=sr_1_4?crid=29SRMUT1ALDBB&dib=eyJ2IjoiMSJ9.0yh6SEMTEAwoDSbPBeEMRZSK-SXjOb-MbA92YmJyDXoqfhvKXgPZVHbGTRnrqhfOmUk3tfJo8nDctpyZRPy2mcnPxOJJl9cERpVlGkJuIR7QXwqr9yT_-DhDSDgzs1T-Uxhbn_3tn_EHEIV5UjwkjNYPnftp-Ue9KWuwlPylH778OfIsqTx3EY8JF68FBZUeFbDGlpxiQzs8H2A4mn0Qa6e9ZS3XWixgBvOAXz2Of9s.wq4x_teVjlgYTmvZDOTkEPSHaM1Y5PUcOCnHQcB-Dio&dib_tag=se&keywords=clear+pvc+tube&qid=1722121870&sprefix=clear+pvc+tube%2Caps%2C191&sr=8-4
@aprilblackregentart66472 ай бұрын
@@BlackSheepProps Wow, that’s convenient 😂 I was thinking you butchered a water bottle!
@BlackSheepProps2 ай бұрын
Yeah, all I had to do was cut it to the correct length on the bandsaw.
@stephgiles52693 ай бұрын
Hi. I have just come across your video. I have found a technique from someone who makes bird feathers from EVA foam sheets. They use a 1mm thickness, but said with heat manipulation etc, they make the foam paper thin but it keeps its strength. I have tried myself but I cant get it paper thin. Any tips guys? Many thanks x
@BlackSheepProps3 ай бұрын
Hey! I’m no expert but if you watch my video on the Valkyrie Helmet it has tons of feathers on it. Maybe it might give you some insight that you can spring off of?
@pest-alt-accountАй бұрын
You could use packing foam, its semi transparent
@aprilblackregentart66473 ай бұрын
This has got to be the most educational/inspirational/ultimate foam build I've seen. So many good tips and techniques are all here. You kept starting cuts that had me going 'is he really going to try that?!' LOL. This is so cool!
@BlackSheepProps3 ай бұрын
Man this is so cool hearing that the stuff that got me jacked up is getting someone else jacked up!! I love every detail and love when they turn out like I hoped. Glad you are getting something from the channel.
@aprilblackregentart66473 ай бұрын
Love seeing you use the circle templates. I have a bunch of different ones that I got from my dad. They come in handy for foamcrafting! I even have one that has triangles and hexagons. I've been making something lately with lots of circles and dowels. I tried your dowel wrap method on one piece and it came out awesome I think.
@cloviepounders67033 ай бұрын
What's a good source to buy bulk eva foam for builds?
@BlackSheepProps3 ай бұрын
I bought all my foam from TNT COSPLAY in Texas.
@cloviepounders67033 ай бұрын
@@BlackSheepProps thanks for the swift reply, do you know if they deliver out of state? I'm in Ohio and i haven't found a reliable source with a good variety pack.
@BlackSheepProps3 ай бұрын
@@cloviepounders6703 Yep, I’m in Florida and it ships to me.
@MrHQScarface3 ай бұрын
Can someone make this for my kiddo I really wish I had time to do something like this for him
@HELLEKSONART3 ай бұрын
Love the LawGiver.
@MoseyGamesYT4 ай бұрын
How did i get as many views as this guy? My channel sucks. This guy is way better for sure!
@BlackSheepProps4 ай бұрын
Wow! That’s very nice of you MGYT!! That’s actually why I retired, I was still almost totally invisible after 3 years of designing, building, filming and editing almost 7 days a week. But man it was super fun while it lasted!
@Fred1999_HD4 ай бұрын
i was using it like regular glue, this helped me out so much lmao, thank you
@АндрейКнязев-з9о4 ай бұрын
Великолепная работа! Лучший Доминатор своими руками, который я видел. Благодарность из России. 👋🙂
@BlackSheepProps4 ай бұрын
Wow! Thank you very much! It was one of my favorite props to build! And very simple. Thank you from the U.S. !!
@rgopal76764 ай бұрын
வணக்கம் தமிழன்
@Space_Guy464 ай бұрын
Thanks, my biograft cosplay is gonna be FIRE (pun intended)
@TuuTieFruuTie4 ай бұрын
Thank you for all the video's! Watching them gave me the convidence and a ton of tips and tricks to try and make my first cosplay weapon. It turned out great and its something I'll definitly keep on doing, Thank you for the inspiration! Hope you are well
@BlackSheepProps4 ай бұрын
I am so glad to hear that my videos helped you start building! Keep it up!
@chilufyashatunka58604 ай бұрын
I'm a bit late but can i repurpose a yoga/workout mat for cosplay to make let's say, a helmet?
@BlackSheepProps4 ай бұрын
Hmm, not sure. I have no idea what a yoga mat is made of? Sorry I can’t be more help.
@dracarys47675 ай бұрын
Question.. the core I used wasn't good enough and now it's floppy, how do I correct that or am I screwed? Is there any way to give it an exoskeleton?
@BlackSheepProps5 ай бұрын
Hi! Hmm, the only time I have done exoskeleton sort of stuff is with small thin pieces. When it is small or thin I paint the entire piece with super glue and when the super glue drys it leaves a thin hard surface coat. Only other thing I can think of is - if the piece in question is flat on the sides and not shaped, they sell really thin metal strips at the hardware stores so instead of the support being round it is thin - then you can lay it up against the flat outside of your piece and using contact cement overlay another thin piece of foam so you have a thin metal support added. It will add a little bit to the width you wanted but with a thin metal strip and a thin piece of foam ( maybe 3MM ) it will be stiff.
@dracarys47675 ай бұрын
@@BlackSheepProps Thank you!!!
@aprilblackregentart66475 ай бұрын
I love me some Judge Dredd. I love the look of that matte black paint!
@aprilblackregentart66475 ай бұрын
“A giant pencil” made me laugh out loud. The things you do with foam is astounding!! You show it’s possible to do almost anything with it!
@BlackSheepProps5 ай бұрын
You made the 3 years worth it! I was just talking with my brother, who builds amazing dioramas, and I was commenting on what a colossal failure the channel was. It never made it into the stream for millions to see. But it’s the small group like yourself that made it worth while. Thanks!
@IMOO18965 ай бұрын
You’d think with a video entitled heat gun basics, it would get you who to adjust the heat temp, and how far from the surface to use the gun.
@BlackSheepProps5 ай бұрын
Well, you’d think with only 2 settings it wouldn’t be that hard. And the video actually shows how far to hold the gun away from the foam. Not sure what you’re not getting?
@aprilblackregentart66475 ай бұрын
What a gnarly color lol. The assembly on this was incredible!!
@BlackSheepProps5 ай бұрын
Yeah!! Ultra pink!!! I loved that build!!!
@ickleshouse5 ай бұрын
please come back dude !
@BlackSheepProps5 ай бұрын
That’s awesome!!! Thanks a lot. Yeah, I got burned out after 3 years of nonstop creating. Hopefully I got enough on the site to help folks learn everything I knew. Happy building!!!
@ickleshouse5 ай бұрын
@@BlackSheepProps awww dude thanks for the reply.binge watching now ,hope you are doing well
@EPICSportsMoments4u5 ай бұрын
Brother, you have a list of tools you are using? Maybe some amazon affiliate links I can use? I am just getting started and have NOTHING in the way of supplies or equipment, so I can use all of your recommendations.
@BlackSheepProps5 ай бұрын
Hey man! Here’s a link to my channel, check out my video on tools. Also, every video on my channel features all the tools I use so you can watch those too. Have a great time getting started! www.youtube.com/@BlackSheepProps/videos
@aprilblackregentart66475 ай бұрын
That simple color scheme looked like fun to do!
@BlackSheepProps5 ай бұрын
The simple paint jobs are a nice break!
@aandrews77335 ай бұрын
To cover relatively large areas (for example, two 14"x14" surfaces) in an appropriate amount of time (to avoid excessive drying), should the contact cement be rolled on? And if so, how likely is it of applying too thick a coating by rolling? Any pointers for rolling on contact cement would be greatly appreciated!
@BlackSheepProps5 ай бұрын
Hi, I have covered large areas by pouring the cement out in a puddle and using a large throw away brush to paint the entire surface fairly quickly. It takes several minutes to begin drying and even after it is dry it will still make contact with another surface with dry cement on it. That’s actually how contact cement works on all of my builds - coat 2 pieces and let them both fully dry and then they will stick together.
@aussicilian7176 ай бұрын
How would you do the WW2 M1/M1A1 variant?
@Unfiltered_POV6 ай бұрын
Hey Steve I have a pet chair made from sponge like foam that’s glued together into a chair shape with a fabric cover that I put on a passenger seat on a motorcycle that my dog rides in. How can I reinforce or harden the foam so it’s less flexible and is more rigid for my furry friend to be more secure? Any help is appreciated.
@BlackSheepProps6 ай бұрын
Hi! Not sure what kind of foam it is, but I know with EVA foam you can slice the foam in half like 2 pieces of bread and imbed something stiff in between the two pieces like in my video. But again, I don’t know what kind of foam it is so I can’t guarantee it will work like it does in my video on inner supports.
@Unfiltered_POV6 ай бұрын
@@BlackSheepProps it’s not like regular styrofoam it’s the sponge like one that’s been glued into a shape of a oval chair, it’s pretty sturdy but deforms when I watch it down to my bike to keep it secure so I’d like to use something on the bottom and sides so it keeps its shape and stays sturdy. I’ll try to figure out what kind of foam it is I believe they might use it in tv packaging boxes but I’ve also seen regular foam too and it’s not that.
@BlackSheepProps6 ай бұрын
Hmm, really don’t know about how to strengthen foam other than EVA? Sorry. Maybe you could make a box with really thick EVA foam ( 18MM or 24MM ) - 4 sides and a bottom - and then hot glue your current foam inside it as a cushion? That way the structure is sturdy from the EVA and the inner part is cushiony from your foam?
@Amazing1invention6 ай бұрын
how to recycle eva in house?
@BlackSheepProps6 ай бұрын
Don’t know. Sorry.
@the_eminent_Joshua_E_Hrouda6 ай бұрын
But how does it ACTUALLY work?? And instead of leaving it to dry for 5 minutes, or as my can says: 20 min, what if you left it for a week or a year? Would it still stick when the 2 items are brought in contact? I guess I could do an experiment. But I'm impatient.
@BlackSheepProps6 ай бұрын
Hmm, good questions. I can’t really say since I only used it within 2 or 3 minutes before I attached two pieces.
@WiltedRaven26 ай бұрын
I wonder what happened to the channel. I miss it. So much passion in the creations and this man will forever have my respect. Top teir stuff. It's such a shame you did not blow up as you deserved so much more with the amount of awesome effort you put in. People with millions of subscribers don't put in what you do. I wish you the best man.
@BlackSheepProps6 ай бұрын
Thanks so much!!! I am so glad you liked the channel. Yeah, I got tired of grinding these out and being totally invisible on KZbin. Oh well, I had a lot of fun. Thanks again.
@WiltedRaven26 ай бұрын
@@BlackSheepProps I don't blame you for leaving. You did not get a return on your efforts so I understand. Im just getting into this kind of stuff and your videos are very informative, I have been learning alot. Edit: So I apreciate the videos you took the time to make.
@BlackSheepProps6 ай бұрын
Yeah, got burned out with little return for sure. I mean, a lot of people have watched the videos overall but it didn’t blow up. I was never showing up in people’s searches. Even when using exact wording no one was finding my videos. I was blocked form showing up in searches. I couldn’t break through KZbin’s algorithm. I have an ETSY site that sells all of my templates for the builds and they are still selling so that’s cool I guess.
@WiltedRaven26 ай бұрын
@@BlackSheepProps Thats great you can still make a buck off the templates 😊. I gave up on youtube with my old account too. Consistant quality uploads don't work and it confuses me how people with no skill or talent end up getting the attention.