Basically wrong technique. The logs should be placed on the bottom as a first thing. Then build the stack of smaller woods with a the center the ignition.

How does this compare to your CI2700 model?

how much is one of them wood stoves

Best glass cleaner is wet ashes from the stove. No need to use chemicals as this is the best cleaner.

Wow! not helpful at all!

Yeah but do they heat as well as the older models? Newer stoves are so heavily insulated and shielded they cut off a lot of radiant heat transfer.

The remote is working the on/off but not the blower. How do I fix this?

Bad design, Gasket glue helps but only for a while. Even the stove installers couldn't get them to stay ....Never buying Regency again

Thank you. I just bought used stove. Without you easy instructions i would have been lost. I really thank you!

I was told to not use any newspaper to start the fire for catalytic wood inserts, as the light ash will eventually clog the catalytic converter grid. Was that wrong? Can I use my bills and bank statements (without color prints) to start the fire with catalytic insert?

My Regency stove, does not draft well enough to build a fire without my house filling w smoke, wished I had bought something else.

Choose becuae of ignorance. Had a Regency woodstove for almost three years now, and it still doesn't work.

As an engineer, I have to suggest that Regency would be better off hiring a few. The need for AAA inside the remote, and then AA in the fireplace tells me someone doesn’t know what is available on the market. Since the fireplace needs 110VAC to operate, how about borrowing some of that 110V to power the receiver? Otherwise, owners have to chase down batteries call the time. This is a design flaw. I’m glad you guys don’t design nuclear weapons.

Do I have to put battery backup in the receiver only if there is power loss?

And then all the hot gases are thrown through the pipe...

That was useless. Two different woodstove shops, and a Regency rep, have looked at my woodstove and said nothing is wrong. Then why is smoke and flame sucked out if I open the door, and I have had smoke pour out of every side of the stove, and the box in the ceiling that the chimney goes through. And that's with the doors and windows open. And cold air blasts out of the slot for the damper control, I'm assuming fed from the fresh air feed coming in from the crawl space. They all said that was normal, too.

Fill a tuna can with rubbing alcohol place in middle of stove light with tissue. This will heat up your stove pipe It will also get your kindlin going. No smoke.

Where is your manufacturing located?

Please Note: Leather gloves are not included with your stove. We apologize for the incorrect information provided

dont u loose most the heat going uo the brick chimney then have it condensate on the brick chimney in the attic?

I have fireplace regency p36 and p42. Both did not have batteries back up for power outage. How can I turn on when with no power please? Thank you

We have Regency fireplace p36 and p42. we would like to know how to turn on, when is power outage. p36 and p42 using millivolt do not have batteries back up? can you give us the advice pleas. Thank you

I have an Hi500 and my stove gets up to 1200 degrees Fahrenheit when the air control is at it's lowest setting with the Catalyst engaged. is this normal?

Is this the Skope 2?

Very much appreciate the video. Installation date fast approaching!

Did this...works but the pilot does not stay on. I hold down for two minutes and it still does not turn on. what is the deal?

extensive research... what is the return % ? scandinavian stove are above 91%

Do not buy a pellett stove unless you know a technician, the service is crap.hard to get parts,nobody knows shit about how to repair them,then want to rip you off to tell you how to fix it yourself.just another money racket

Looks awesome. Their website is awful though😂

F2450 stove. I am at wits end with this thing. I have tried every recommendation so far to no avail. Puffs smoke into house no matter what EVERY TIME no matter what the stove temp is. .On initial startup I figured out i need to heat up the firebox with torch to get a updraft established then hit the kindling with it with the door open only one inch and then leave the door cracked until fire is totally established.All good...Then when it's time to add logs the fun begins The only lowest emission back into house is when there are only coals, no logs actually flaming. I tried sliding one of the top baffles to the front to let some of the smoke to go out the back, what a mistake, the stovepipe got so hot it smelled the house out with burnt paint that made us all sick I tried installing outside fresh air vent thinking negative air pressure in house (too tight) NOPE, fired up stove and now even on minimum draft set, stove acted like wide open throttle and soared to 700 on half fill, it really likes cold fresh O2!!, good thing I put a damper in that fresh air vent, closed it almost all the way before the fire calmed down, Stack is 6" double wall pipe and double wall insulated chimney, 16 total feet. Think I made a bad choice with this disaster. What the hell is wrong with this thing Regency,?? Bad Design because way to many complaints for the same issue. Anybody want it? it's brand new has blower and legs. And yes I have tried turning off the blower and cracking the door SLOWLY to load it NOPE smoke comes in my face as soon as door is opened just enough to put a log in, UNREAL, I am sick of opening the windows and turning on the bath/kitchen vents to air out the house every stinking time that door is opened juet a quarter way. Total BS, this is a stove for a detached and very airy garage, Not a home. I'm open to any help with this problem b4 it goes into the pond.

Doesn’t matter if you hammer them in, they WILL fall out, often (mine fall out weekly), and you’ll be left with a cold house frequently while you’re waiting to hammer them back in time after time after time. This needs to be redesigned.

Glad I’m not the only one with the same issue’s 😂 The smoke makes everything smell etc. not to mention the damage to my breathing

What is the price?

Congratulations…This video gets to the point of information that I needed. I spend a little time in the woods gathering fallen broken off varietal hard wood tree branches. The tiniest ends of the branches (the diameter of a pencil and smaller) are collected in a wheeled garbage can and saved for my kindling. All together I have 5 different sizes of wood. As the branch continues in length I collect 3 different sizes which can be broken by hand and by foot. At some point the wood is so thick and strong a small chainsaw is needed. The 2 larger sizes are cut with a more substantial sized chainsaw but I don’t split the wood. I start my fire with a couple of tissues and arrange my kindling like a little teepee and add the 2nd and 3rd sized pieces of wood and then light with a match or two. Once the fire is sure I gently add the larger sticks and finally larger logs of wood. This works for me as I enjoy spending time in the woods and it really makes use of all nature is offering.

Thank you very help full 😊

I just wish the receivers in Regency lasted longer !

Do I have to light the fire or is it self sarting

When running the catalyst, can you run the blower fan on low? Or should I keep the fan completely off?

I have the Hampton HI2450 I only see one draft lever? My stove smoked like crazy today

Just installed our first one for a customer last week!! They are so nice!!

Would be good to know, after doing all this, and the fire burns down, should I keep the cataylst engaged? Will it hurt the catalyst if it stays in? My i1500 fires burn down in a few hours, not all night

Any tips on setting up? We're get very poor flame patterns with ours.

Which Regency units are compatible with the Proflame Connect Plus app? Also which units have the secondary burners / split flow feature?

Does the G800EH have a different flame appearance as compared to the G800EC?

Just turned on mine today for the first time! Came with the house I just got as my first home. An amazing fireplace for these cold Michigan winters!! Thanks for the helpful video took me 5 minutes to become familiar with my new gas fireplace with the channel videos

How about you explain these “advanced technologies” inserts of presenting this garbage fluff piece designed to sell your product. People are on KZbin to be taught how things work, not be sold on the fact that they work.

I get an Er1 message - Can't turn on or off the unit but I hear the beeps. Now what?

Is there a way to change the default setting of the flame when you initially turn the remote on? I dont want it to come on in "high" mode. I'd prefer a default of more medium. Thank you