Hello so just quick throw in do be carful you can over do it with the heat I sadly just figured that out thankfully I had a back up :D
@melanieklarofficial3 күн бұрын
So to do it on cricket how do you get it to keep the clear behind it? Instead of cutting it all out? If I do the offset it wants me to choose a color.
@JoieSabordo-oz2jt5 күн бұрын
How many washes do you think before the design fade away?
@pamthrelkeld8157 күн бұрын
Your videos are always great and you a are always an inspiration.
@KimByers6 күн бұрын
Thank you so much Pam! 🩷
@KathyPowers-d3i8 күн бұрын
What is the name of the site with the patterns?
@KimByers6 күн бұрын
Hey Kathy! I used Creative Fabrica and Canva for these projects. Thanks so much for crafting with me!
@DebbieRicciuti9 күн бұрын
This is great. I’ve been wanting to g to try sublimation but didn’t want to invest in an expensive printer. 5hank you for sharing. I can’t wait to try it
@KimByers6 күн бұрын
Thanks so much for crafting with me Debbie! 🩷
@E_clarke11 күн бұрын
if you don’t have the easy press, would you be able to use an iron and an ironing block?
@KimByers6 күн бұрын
Yes! You can absolutely use an iron, but you may want to watch my video on how best to use an iron for these projects. kzbin.info/www/bejne/aX6clHqdrt90eLssi=YXILDgg3BVMZWowy Thanks so much for crafting with me!
@sharonwbaker439612 күн бұрын
Very clear and precise video! Thank you so much. Calibration Issue: I have followed all your steps, however when I get to the "Start" drop down, my only option is "Set Up Cutting Machine". I do not get the "Print Then Cut" option. I've recently did a calibration and it worded just fine. But, then I started getting the "Can not read registration lines" message when doing print then cut. So, I decided to try calibration again. Now I can't follow through on calibrating. Can't figure out why the machine wants to walk me through setting up my machine again. I've had this machine since 2015. It's Sunday, so I can't call Cricut support and I'm right in the middle of working on a project. Any suggestions.
@KimByers6 күн бұрын
Oh Sharon! Sorry for not getting back sooner. Although I don't know as I would have been much help. I'm hoping Cricut support was able to help and you're back to crafting!
@minniewilburn326912 күн бұрын
I bought this press but haven't used it yet. Excited to start using it though!
@KimByers6 күн бұрын
Hope you love it Minnie! Thank you for watching. 🩷
@prptink12 күн бұрын
I love that press ♥️ I have their other one and I use that one the most. Thanks for the svg, love it! All the things came out beautiful 😍 stay blessed love 🥰
@KimByers6 күн бұрын
Thanks so much friend! So glad you love the SVG too. 🩷
@kimmie59613 күн бұрын
If I knew there was so many issues I would have never bought this thing! It’s getting tossed 😂😂
@KimByers6 күн бұрын
Sorry you're having trouble Kimmie! If these ideas didn't help I would contact Cricut support. They're super helpful.
@kimmie5966 күн бұрын
@@KimByers Thank you! It was my error as usual. I actually love it !
@luluhaynes138814 күн бұрын
I ONLY use furniture on wheels in my art space[s]. Carts, dressers, tables, whatever - must have wheels/casters. But not your cart. I prefer a cart of ALL drawers, with places to hang hooks and stuff. Your cart has too many different areas/functions. This video would have been better if you showed examples of your ideas.
@KimByers6 күн бұрын
Thanks for crafting with me Lulu and I too love drawers, mostly to hide things to keep my space looking tidy. 🩷
@vivianbunch196315 күн бұрын
Very good directions with great results. Thank you👍❤️
@KimByers6 күн бұрын
Thanks so much for crafting with me Vivian! 🩷
@flossingdebi15 күн бұрын
Does this heat press tell you if you are on low, medium or high pressure?? Or do you just have to guess? Thank you
@KimByers6 күн бұрын
Hey Debi! On this one you have to test, but I understand they're coming out with another in November where you can adjust and set the pressure. For the price, this one is a pretty good press. Not sure about the next one. Thanks so much for crafting with me!
@LisaVornhagen15 күн бұрын
That's pretty nice and seems to work really well. The only thing I don't like is how the numbers constantly move around. I find that annoying, but that's just me.
@KimByers6 күн бұрын
I thought it did a good job, but I hear you on the shifting numbers Lisa! 🩷 Thank you for crafting with me!
@LisaVornhagen15 күн бұрын
That really came out beautiful!
@KimByers6 күн бұрын
Thanks Lisa! It saves me a bundle. 🤣
@chamdeezy53215 күн бұрын
Thanks for sharing! 😊
@KimByers15 күн бұрын
Thanks for crafting with me! 🩷
@sridharasantoshkumar16 күн бұрын
Rd Ffdshs to I I love it fish 🐠🐟🐟🐟🐟
@GODtalks7916 күн бұрын
Is it easier to be a Christian when your rich like you
@KimByers16 күн бұрын
@@GODtalks79 🤣🤣 Actually I’m no where near rich. But you bring up a good point. Do you think that only the wealthy have access to the Lord? If you read the gospels, Jesus spends most of his time with the destitute and the impoverished. I would garner to say that it is actually easier to be Christian if you are not wealthy. Read Matthew, Mark, Luke and John. Specifically Matthew 19:24. “It is easier for a camel to go through the eye of a needle than it is for rich man to enter the kingdom of God.” If you do find yourself rich, it is your responsibility to share your blessings with those who are suffering. Have a great day and be blessed!
@marymize979717 күн бұрын
Yes
@KimByers17 күн бұрын
Thank you Mary! Prayer is our super power! ❤️
@michaeldequatro101220 күн бұрын
Thank you so much Kim. My vinyl was slightly pealing off of my wood signs after about 6 months. I'll use the Polycrylic next time 😃
@KimByers16 күн бұрын
So glad it helped Michael! And thanks so much for crafting with me! 🩷
@ChristianJayMaala21 күн бұрын
Thank you so much, this Cricut was saved from being tossed😂, you're a life saver!
@KimByers16 күн бұрын
Oh I totally get it! I'm not great with technology and I just want it to work. 🤣 Thanks so much for crafting with me and happy Cricuting. 🩷
@LeaveDerry25 күн бұрын
This was extremely useful!!! Thank you so much!!! 😊🙏🏾
@KimByers23 күн бұрын
So glad it helped! Happy crafting! 🩷
@ashleybird789225 күн бұрын
Amen ❤
@MultiLJ125 күн бұрын
Blessings! Amen ❤
@jameswebb987626 күн бұрын
Priceless.
@jainfreeman958729 күн бұрын
God bless you ✝️ ❤❤❤
@jainfreeman958729 күн бұрын
Beautiful property 😊
@KimByers28 күн бұрын
Oh thank you Jain! I have too many weeds in my flower beds 🤣
@mgb42629 күн бұрын
Hi there! Just came across your video because I am currently in the process of converting my Epson ecotank into a sublimation printer. I have found that a lot of the reviews I have read mentioned you have to print something every few days. Is there a picture you suggest that I can print that would kind of incorporate all the colors in it so I can print that same picture every few days. That's not too big? And how big do you suggest I would print that picture. Great video and very informative. Looking forward to your reply.😊
@KimByers29 күн бұрын
Good morning! Actually, what I recommend is to run the "nozzle check" diagnostic in the maintenance menu. It uses very little ink, AND it uses all the colors. 🩷 Thanks so much for crafting with me and happy sublimating!
@erikawilson115429 күн бұрын
Thank you. Can I use my cricut to write inside the card after I've made it? I didn't make the card on my cricut.
@KimByers29 күн бұрын
Good morning Erika! Yes, you can. It's difficult if you have embellishments, but it could be done. OR, you could create a insert sheet and write on it, then use glue dots or similar to insert it inside the card. That would also allow you to use another layer of pattern or interest. :) Thanks so much for watching and happy card making!🩷
@erikawilson115429 күн бұрын
@@KimByers I'm going to have to do that. As my cards don't fit the card mat. As I just discovered this morning.
@LinetteMilesАй бұрын
best video I have seen about this topic!!! THANK YOU !!!!
@KimByers29 күн бұрын
Thank you so very much Linette! 🩷
@LisaVornhagenАй бұрын
Great projects! I love that pink!
@KimByers29 күн бұрын
My sweet little niece does too. Who said back to school had to be yellow and red. 🤣
@LisaVornhagenАй бұрын
That looks like a lot of fun! I love playing around with text!
@KimByers29 күн бұрын
Hey Lisa! I hope you're well and thanks for stopping in.
@bethlane3411Ай бұрын
Question: now that the joy app iis not available how can I get nformation to use my new Joy?
@KimByers29 күн бұрын
Good morning Beth! They rolled all of the Joy content into the larger Design Space app because they found that crafters often owned regular Cricuts and Joys. Thanks so much for stopping in! 🩷
@MiMySlotsАй бұрын
Hi Kim, thank you for posting this! I just got a new printer the other day. When you say do a regular test, is this a printer test or a color printer page? Thanks
@KimByersАй бұрын
I found keeping the ink moving helps the longevity of the printer. Just print one of the nozzle checks under maintenance. It's not much ink and it keeps the printer active. Thanks so much for crafting with me and happy sublimating! 🩷
@cynthiagilliam8142Ай бұрын
This video was so helpful! Thank you for this wonderful tutorial 🙏🏽❤️
@KimByersАй бұрын
So glad it helped Cynthia! And thanks for crafting with me! 🩷
@mariandimson8450Ай бұрын
Thank you.
@KimByersАй бұрын
Thank you so much for crafting with us Marian! 🩷
@bobslfcu773Ай бұрын
Nice video. Have you tried to put Puff Vinyl on a hat?
@KimByersАй бұрын
I've not! But that would be amazing I bet!
@nfinitymonet8257Ай бұрын
Can you recommend good sublimation printer that does not need to be converted?
@KimByersАй бұрын
I've not ever owned one, but I have friends that own the SAWGRASS and love it. Thanks so much for watching and happy crafting! 🩷
@studbunnyzeusАй бұрын
Thank you so much ❤
@lowfatrawvegan1402Ай бұрын
I appreciate this video so much as I am brand new to cricut and desperately need to make tags for my resin art boards that I sell locally. But, you talk so fast I had to play this video three times just to take my step-by-step notes. crazy I know, but its the truth. LOL
@KimByersАй бұрын
Glad it was helpful. 🙂 And thank you for listing multiple times 🩷 HAPPY CRAFTING!
@sarahwilton1695Ай бұрын
Can this be done with a Cricut joy x
@KimByersАй бұрын
You can use Design Space to do a version of this, but you can create in Kittle and export it to use in Design Space too. 😊
@thechristianbtsgirl2022Ай бұрын
How long did u press the ribbion for I didn't know u could do that
@KimByersАй бұрын
Hi Sarah! I only press for about 20 to 30 seconds. Maybe test a small end before you press your design. Thanks so much for crafting with me!
@prptinkАй бұрын
These all came out sooo sweet. I love them 😍 awesome job! I know they’re gonna love it 😊 stay blessed love 🥰
@kimtaft619Ай бұрын
I have never used infusible ink. I think I noticed that you put the pretty side facing up. Correct? Did you mirror it in Design Space? I know it automatically does it for iron on but don’t know if it does it for infusible ink. Thanks. I look forward to your Cricut videos. Thanks for sharing!
@KimByersАй бұрын
Hi Kim! Thank you for crafting with me. ❤️ And yes on both. Design Space will automatically mirror Infusible Ink, so thankful they added that! 🙃 And yes, pretty side up and weeding is a cracking/popping method because it’s like a stiff paper. No tools really needed. Thanks again and happy crafting!
@GoReckless_Ай бұрын
THANK YOU! Genius! I've probably done 15 dang calibrations today and they kept getting worse... I tried ADDING more light, deleting the software, firmware, but not turning off the lights... THAT did the trick. So wild!
@KimByersАй бұрын
@@GoReckless_ so glad it helped! And that you’re able to get back to crafting! ❤️
@NoazinhaАй бұрын
Thank you so much for your video! The turning off the light tip was all I needed, and I tried so many things! Amazing tips!
@KimByersАй бұрын
@@Noazinha so glad it helped! ❤️ and thank you so much for crafting with me
@terriberry9401Ай бұрын
Thanks for a great video! Short and to the point! Question, on those mock templates with the three tumblers.... can you have a background on them like i.e. Fall or Christmas to go with your theme? Thx!
@terriberry9401Ай бұрын
Nvmd... I see that you can. Just tried it. 🥰
@KimByersАй бұрын
Thanks so much for crafting with me Terri!
@sharonallen9146Ай бұрын
Thank you for this quick fix. Was struggling for an hour