Si, por supuesto. visite nuestra página de inicio www.dracotools.com y envíenos su solicitud de cotización. www.dracotools.com/en/products/bender-mobile-roll-forming-tools/disc-bender-db-41-single/

Boa tarde! Como faço para adquirir uma ferramenta dessa? E qual o valor?

Estimado Renan, no tenemos un punto de venta en Perú, pero puede solicitar el dispositivo en nuestra tienda web en Holanda. Es un producto aleman. Enlace al producto: www.zinktools.nl/webshop/gereedschap/benders/rol-benders/detail/30/draco-eco-bender3200-met-o-handvat--91545.html

www.zinktools.nl/webshop/gereedschap/benders/rol-benders/detail/30/draco-eco-bender3200-met-o-handvat--91545.html

That might be possible, but totally depending on the requested radius.

Hi Isaac , a full circle is not possible. Except when you cut the upstanding leg at 2 places to make it 2 half circles. If it can be done in 1" depends on the kind of material, the thickness and the radius.

Yes it did. This machine is cutting the seam. It is probably the only one who really can.

@@dracotools Impressive, have you a video of the battery version doing the same?

@@adrianbooth9097 We did not make the video with the cordless version yet. The cordless version AK3514-7R Li-Ion is as strong as the one with a cord. See also: www.dracotools.com/en/products/shears/ak-3514-7r-li-ion/

@@dracotools When cutting ducts I struggle with the seam, which coincidentally has been edited out from this video @0:16... Cutting the seam close to perpendicular works fine, as can be seen here when demonstrating cutouts, however for cutting ducts to length I've ended up making the starting hole close to the seam, cutting away from it and stopping when coming around to the seam again. I cut the seam itself with hand shears, since every attempt at cutting through with the machine has ended up with much swearing and having to trim off uneven bits with hand shears anyway. If I'm doing something wrong I'd love to know, but it seems to me that the seam is slightly too thick. Blade is brand new, having bought the machine 2nd hand with a broken blade.

@@koma-k Hi Ketil, there is a good side and a less good side of cutting spiro tubes. You should cut from the side the material goes up to the seam and not from the other side where you cut against the upstanding seam. If you know what I mean. Nevertheless the shear cuts from both sides, but sometimes, when cutting from the wrong side, the seam is splitting in it´s layers and pokes into the shear head. This is when you need more patience to get through the seam. Allow the shear a bit more time to cut these 4 layers. Concerning your "problem" we do have many different types of slitter shears. Maybe you are not using this type, but another one which is not for seam cutting. The right types for cutting seams are 3514-2 and 3514-7R. You wrote you bought the shear 2nd hand and you´ve put a new knife in it. Please check if you used the right shims and the knife has no play. It is not ok when the knife is too loose. A manual how to place the knife properly can be downloaded from our site.

Dear Henry, thank you very much for your question. We do not manufacture a version of this machine for self lock systems or machines voor self lock systems at all. Please check our homepage www.dracotools.com for many great tools, benders, detail folding brakes, seaming tools, power seamers, decoilers, power tools like corrugated nibblers and slitter shears. Regards, Jurgen

www.zinktools.nl/webshop/gereedschap/benders/rol-benders/detail/30/draco-eco-bender3200-met-o-handvat--91545.html

Out of Europe please send your inquiry to [email protected]. Within Europe this might help: www.zinktools.nl/webshop/handgereedschap/benders/

Look up Wuko they are made in Austria.

ook in Nederland verkrijgbaar. DRÄCO is de enige met een ergonomisch handvat. Want als je de bender op maximale lengte gebruikt heb je nog steeds een hendel. www.zinktools.nl/webshop/gereedschap/benders/rol-benders/detail/30/draco-eco-bender3200-met-o-handvat--91545.html

DRÄCO is made in Germany en van zeer goede kwaliteit, bovendien zeer innovatief.

no, it is still 1.12 meter. www.zinktools.nl/webshop/machines/zetbanken/vingerzetbanken/detail/136/draco-vingerzetbank-k1-agnu-3-mobiel-met-onderstel--box-92662-3.html

Well, I have a problem with this kind of comment. They are not that expensive. You do not know our company, so I will give you a quick introduction. Our factory is located in Germany, we produce every single item in Germany in a very high quality and we are not a low-income country. Our employees receive a reasonable salary as it should be everywhere in the world and yes, these could be the reasons for a higher price, but do not forget, we are Germans and that means we are efficient. ;-) In Europe you can get a BKK25 under € 200 (ex tax). We send our products to dealers around the world, which means they pay freight charges, they need to stock items, deal with exchange rate fluctuation and they have to pay import taxes. Big issue these days! We as the manufacturer have no influence on these factors and the price a dealer charges at the end. Good for you that you can make your own tool, but do not leave unfair comments to scare off people.

@@dracotools Well, I live in a rural area in North Georgia in the USA where there isn't a lot of money to be made. Whenever we need something up here, if you can actually afford what you need, your sources are limited to the local Wal-Mart or Lowe's, and if they do not have it, you either learn to do without, or, you make it yourself. It's a shame that those who are wealthy or live in wealthy areas where they can obtain pretty much whatever they want look with scorn against those who most of the time have to live without, but living without is the driving force of ingenuity and invention; we're not limited by the mandates of others that tell us that we must have tool "A" for problem "B", and it only has these specific settings and no other, no, we simply look at the problem, tell our wife, "here, hold my beer," and we make our own to fit our needs. Over the years, I've made everything from copper distilleries to archery bows, and that includes many of the tools needed to make them including a tool designed to wind precise copper coils for my condensers without kinking. And that's the way it's always been in my family. I come from a long line of woodworkers and do-it-yourselfers, so, I'll spend about $20 for roller bearings, steel rod and barstock, I'll spend about an hour or two in the shop, and I'll have my tool, and I'll take the $400 that I don't have to spend on that tool, and I'll buy groceries, and pay a few bills. Because around here, ingenuity and bills are about the only things in abundance.

Hi, just write us an e-mail. You will find the mail address in our KZbin channel info. We will send you an offer with freight charge to the required destination or (if present) we will give you the contact data of a local dealer.

@@dracotools my andress of email: [email protected]

@@dracotools my number of watzap : (55) (94) 992265685

Também tenho Interesse nessa ferramenta como é que eu faço para mim adquirir meu Whatsapp 22 998860037

hello，i can help you, contact with me [email protected]

Hi Justin, this panformer can do stainless steel up to 0.5 mm. The guillotine shear can work up to 0.4 mm stainless. Once the panel has been seamed it is a regular standing seam roof. S-5 products should be compatible. For more information please check our homepage www.dractools.com and/or Rob Haddock at www.s-5.com

Hi Rusty, the EcO-Bender3 is € 319.- EXW , you can order it from our dutch site: nl.dracotools.com/products/W51/P149/eco-bender3-200/ . (Price valid until January 8th.2018)

Dear Camz316 there is a new video : kzbin.info/www/bejne/monWc3ucZbGVjqM showing how to make the standig seam panel. Sorry we do not have a video how to make a hole roof.

They show you at the end of the video, watch the whole damn video

kzbin.info/www/bejne/r5PHqX57ituAjMk

www.dracotools.com , worldwide shipping

Hola queria saber el precio del kit . gracias