3 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
Пікірлер
@naticaleb123 4 ай бұрын
Thank you for the information, I wish I knew some of this information before my lower shower door metal hinge broke off altogether. Now I’m trying to find a solution. Top hinge is intact, but the bottom broke away from the metal track, as it was attached to another glass panel. Do you have any suggestions, Or an online catalog for me to ID the manufacturer of these hinges? They came with my house, made 2005, I am the second owner. Any suggestions will help! Thank you!
@nishakamat3491 9 ай бұрын
😮
@thedomy123 Жыл бұрын
How to change broken glass panel ?
@joshuabrunetta4656 Жыл бұрын
Can anyone tell me what the smaller hex screws on the back of the hinge do? Not the screws that apply clamping force to secure the door but the smaller ones of the interior spine of the hinge? Are those to make small adjustments to the door if my top gap is smaller than my bottom? Similar to a cabinet hinge ?
@TRISEAL.patrick.wallace Жыл бұрын
👎
@lizingrid54 Жыл бұрын
The springs in the hinge eventually begin to show as the door falls from the top. They can be screwed back in, but eventually show again. Can this be adjusted or has the hinge failed, requiring replacement.
@lizingrid54 Жыл бұрын
The springs in the hinge eventually begin to show as the door falls from the top. They can be screwed back in, but eventually show again. Can this be adjusted of has the hinge failed requiring replacement.
@razahassan811 Жыл бұрын
Its a little smelly even with deoderant.
@byronholman9228 Жыл бұрын
What is the cost of a window like this?
@tedtolentino4955 2 жыл бұрын
Thank you, this video was very instructive. I had always wondered what the function of the set screws were, located on the inside edge of the hinge. In trying to adjust a sagging glass door, I initially thought the set screws were there to ensure an adequate gap between the glass and the hinge plate. Hence, my reasoning to back off the set screw to allow a smaller gap and thus make it possible to adjust this sagging door. I'm glad I did find your video to set me straight on the function of the set screws.
@gerhardjmayer4116 2 жыл бұрын
Excellent equipment & great presentation!
@edp9517 2 жыл бұрын
How do you adjust the panels to be plumb
@honestabe7349 2 жыл бұрын
Great video. Man you know a lot about shower hinges. I need to replace some 20 year old shower hinges the lower hinge broke. 90 degree screwed to wall. How can I tell by looking at door in place if I need to order Mickey Mouse ear hinges.
@LeeDock1 3 жыл бұрын
Just saved us $120 callout fee!! The "clicking" noise issue at 3:40 was exactly what we had. Installer said apply 3 in 1 oil and if that doesn't work they have a minimum service charge of $120. One of the set screws was loose by about 3/4 of a turn.
@MrRingsia 3 жыл бұрын
plz share the details n cost anylisys
@stick44 4 жыл бұрын
Well done.
@George860v 4 жыл бұрын
Pesima maquina
@upvccomau 4 жыл бұрын
The only KZbin video explaining to you how the cool colours coverTech (now known as cool colors Plus) performs vs. standard vinyl in a heat spot test! Regards, Dmitry from uPVC.com.au/
@tatersNgravy 4 жыл бұрын
Wtf I thought this was for shot glass I’m tryna get FUCKED UP NOOOOOOOO CAPPPPP💯💯💯💯💯💯
@godbluffvdgg 5 жыл бұрын
The first hinge, to my understanding, actually has a 5 degree off axis load to create a tight seal.
@jfaz 5 жыл бұрын
This demo could be condensed to half the time! But valuable info nonetheless.
@f-j-boutdoors3315 5 жыл бұрын
I have one, however it gives different thickness readings on same unit when scanned.
@loveblessings212 5 жыл бұрын
Do you recommend nail polish remover, Goof Off (..or Goo Gone), or Sprayway Foaming Glass Cleaner (ammonia free) before applying the UV Glue? Thank you in advance.
@loveblessings212 5 жыл бұрын
I love your equipment, absolutely the leader in this field. Beyond quality! I am a guy at the beginning stages of starting a business building vivariums/terrariums/paludariums. I am not a business nor do I have a business location. I'm literally working out of the living room of my one-bedroom apartment. How can I buy some of your holders and UV glue? If I could only purchase one item it would be your glue. I have 4 10w UV lights, 395nm.
@abonorandecor3540 5 жыл бұрын
Hi .I want to have this machine and i want to bring it here in Egypt. What should I do and what ishould pay?
@coolmander143 6 жыл бұрын
i don`t see you feeding the tri-seal into the shuttle to keep corners 90 degree. Won`t they be rounded like this ?
@tksmem 6 жыл бұрын
My hinge just started to pop the door open so slightly, everything looks ok no new noises & all screws are tight.
@MrEndzo 6 жыл бұрын
eeeee labor
@tomvic4443 6 жыл бұрын
Great , straight to the point, professional, informative. A good strong, yet not over presentation. I'd like a litter more lighting. Keep it going
@sallaknehrou4927 6 жыл бұрын
Nice how does it cost?
@PrzemekWieczorek 7 жыл бұрын
No its not hight quality.Only first drill corners.
@BlockRover110 7 жыл бұрын
I have purchased Zola windows and over a year after the original delivery, and a second subsequent delivery, I am still waiting for them to ship me the windows specified in the original specification. Glazing divided lights installed in the factory out of alignment and with incorrect profiles.
@mrwindows4254 7 жыл бұрын
SHGC for Radiant Heat or Direct Solar Radiation?
@starrmusiclive 7 жыл бұрын
audio production team needs a D'essR on this video
@jevonhood6873 8 жыл бұрын
how to lubricate them mines creaks
@charlesyue3891 8 жыл бұрын
I have a similar hinge on my glass shower door, but there are gaps in between each hinge, and water leaks out from there. Is there a way to adjust the hinge to make both sides closer to each other to minimize the gaps?
@converlight3652 8 жыл бұрын
ConverLight dynamic glass
@papesanne377 8 жыл бұрын
TRE JOLIE
@jalalkhawam 8 жыл бұрын
great
@malibuglassandshowerdoorll7782 9 жыл бұрын
Very cool!
@kyawswartun3093 7 жыл бұрын
Malibu Glass and Shower Door LLC glassedgeingmachin
@antoniobruce6126 9 жыл бұрын
I will be working there Monday. Cant wait to start, this company is growing
@thegeniustrucks 10 жыл бұрын
Best Way to Clean Windows www.thegeniustruck.com/best-way-to-clean-windows
@freelevesque155 10 жыл бұрын
Very nice presentation Sam! Great job.
@alejandrosilva3940 10 жыл бұрын
QUISIERA SABER EN QUE MEDIO DE TRANPORTES MILITARESSE PUEDE APLICAR DFI'? aviones, helicopteros, navios, terestres y si es posible necesitari material ilustrativo,videos por ejemplo. GRACIAS
@KidSaturdays 10 жыл бұрын
I was trained by Giacomo many many years ago, lovely guy and knows his stuff! Bottero machines really are simple to use and produce very high standards of work considering the comparatively low price of their machines.
@ronaldorivers236 5 жыл бұрын
Me too, this guy put a bimatech technorev together in like 3 days by himself.
@MrFRAMELESS1 11 жыл бұрын
No. Al you have to do is open or crack the hinge to is open position,. There are 2 very small allen screws which set the pin. If they are lose or the installer didn't check them it will make a clicking sound. Over time if this is not addressed, the pin will wear out and the hinge will have to be replaced. I suggest calling the company who installed it and tell them to get over there and fix it! Good luck. Rally is a simple thing but is overlooked a lot by installers who rush or don't know.
@MrFRAMELESS1 11 жыл бұрын
Good evaluation Tom. I can sum it up for everyone who purchases hinges or an entire farm else's shower door or enclosure. Make sure the manufacturer/retail sale company or installation company provides you with a lifetime warranty. If they do, you know your dealing with a great company that stands behind the product they sell.
@bkboy419 11 жыл бұрын
Great presentation Giacomo!!! Bimatech is lucky to have you!
@mynamehaschanged 12 жыл бұрын
Is it normal for a hinge to click when opening or closing?
@MalibuGlassMI 3 жыл бұрын
@ 3:40
@mynamehaschanged 3 жыл бұрын
@@MalibuGlassMI Thanks, I guess I didn't watch the whole video that time.
@saraneharrell7702 2 жыл бұрын
@@MalibuGlassMI Hi - I had clicking and removed the set screw and tried to apply loctite - unfortunately applied the red (permanent) kind, so my screw stuck about 1/2 way in as I was screwing it back in. I was able to get the screw out - but think I need to replace the entire hinge. The online hinge supplier says I need to get look at the back of the hinge wall plate to determine what kind of hinge I have. But, I think this requires me to remove the door. Is it possible to remove the hinge & then replace the hinge (relying on the 2nd hinge to support the door) while the door is in place? I don't want to start unscrewing the hinge screws unless I know it's possible to remove the hinge without removing the door. Unfortunately - my installer will not come service the door because it is out of warranty & I can't seem to find anybody else who will come work on it - because of the risk of breaking the glass.
@MalibuGlassMI 2 жыл бұрын
@@saraneharrell7702 If you were in West Michigan I may be able to help you. But, if not. I cannot be of service.
@saraneharrell7702 2 жыл бұрын
@@MalibuGlassMI thanks for your reply. Unfortunately I am not near you. Thanks.
@w0rz 13 жыл бұрын
I'm interested in buying the product and want to know where or wen I can buy