2 ай бұрын
2 ай бұрын
5 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@ambaden2 5 күн бұрын
I bought a new carb and when putting the throttle cable with the sleeve, it won’t go in all the way, I looked inside and there’s a metal sleeve that won’t move. Any thoughts on how to proceed?
@brokemexicanreviews 5 күн бұрын
Do you have IG and you can send pics? I can definitely help that way.
@davidhicks2178 7 күн бұрын
I have to replace my resistor soon and my squealing blower motor in my 92 Silverado. I wish my dash was in good shape like yours! I subbed for ya!
@brokemexicanreviews 6 күн бұрын
Thanks brother. Hope the channel helps you out.
@mafia9597 9 күн бұрын
Do you have instagram
@brokemexicanreviews 8 күн бұрын
It’s in the video description. I can possibly help.
@mafia9597 9 күн бұрын
I need your help i don,t have spark to now wiring but i have spark on coil 2wirey have There is electricity and coil heats up
@juanhuttoe4517 11 күн бұрын
Thank you for the video. Getting ready to do the same on my wife's bike this weekend. 😊
@brokemexicanreviews 11 күн бұрын
Of course brother. It’s a simple job. Good luck.
@jasonshortphd 14 күн бұрын
Those 4 screws are JIS heads, not regular Phillips. Remember that is a Japanese carb. Getting a JIS screwdriver will help with stripping them.
@brokemexicanreviews 14 күн бұрын
Learned something new today. I know for the future. Thank you🙏🏽
@jasonshortphd 14 күн бұрын
@ of course! This is how we all improve, community helps us all. Nice work.
@matthewwusinich5181 15 күн бұрын
It's Harbor Freight. $20 for a sprayer is worth it if you only have a small project.
@dwaynebowman2175 20 күн бұрын
Is this quad still available
@brokemexicanreviews 19 күн бұрын
It is not.
@meTimetraveler 26 күн бұрын
how many tools do you do that with..use them then take them back...what a putz
@brokemexicanreviews 26 күн бұрын
I keep all my tools. Imagine posting rude comments on KZbin after watching DIY videos because your dad was never around…anyways I’m your dad now. Love you son.
@nickywaggs8672 27 күн бұрын
How the hell do you change the back one?
@brokemexicanreviews 26 күн бұрын
If you have IG you can send me a pic of which one you are talking about?
@kurtfirestone2761 Ай бұрын
Ive triwd 2 different types of the feit motion bulbs and they come on and dont go off. Junk
@brokemexicanreviews Ай бұрын
Mine has worked fine for a couple years now. Sorry yours sucked. Happy Friday🙂
@MartezBush-i3d Ай бұрын
I have a 150cc quad and I'm having the same problem please get to me if u can
@brokemexicanreviews Ай бұрын
Do you have IG? You can send me a video of what it is doing.
@kylenunnelley1482 Ай бұрын
Bro I want to thank you so much I have been working days on it I messed up the wiring harness trying to deduct all the stuff that I don't have in it because it was a mess that it all came with I knew where everything went except for that black wire I appreciate you so much you explained it in detail I definitely shared subscribed and will definitely pass it on
@brokemexicanreviews Ай бұрын
I am so glad it helped, I have been there myself, getting the wiring correct can be such a pain.
@kylenunnelley1482 Ай бұрын
I don't think the black and yellow striped wire I had was ever hooked up because I can't get positive or ground continuity when cranking or just power at all when hooked up to the battery now the green is ground and you said black to Black in the video so I'm not real sure what the black and yellow striped wire is or where it goes but it definitely doesn't activate the coil and it definitely doesn't have any sort of juice at this time to the ground side or to the hot side so I'm going to take that black wire and run it from the ignition switch to the primary side of the coil and I should get spark back
@johncurtis6988 Ай бұрын
Is this a tao 125d?
@brokemexicanreviews Ай бұрын
This one is a 110cc. All Chinese quads 125cc and smaller and almost identical when it comes to swapping parts
@johncurtis6988 Ай бұрын
@brokemexicanreviews I ordered one before I saw ur link from a website but it's only 29.5 in length. I see the one u put in the link is longer. U think the one I ordered I'd gonna be too short?
@brokemexicanreviews Ай бұрын
No idea. You can always try it. If it doesn’t work, send it back😂
@johncurtis6988 Ай бұрын
@brokemexicanreviews yeah but I'm trying to get this running ASAP for my son. It broke the day we got it he didn't get to enjoy it at all. If h think it's too short I'm gonna go ahead and order the one in the link
@johncurtis6988 Ай бұрын
@@brokemexicanreviews ?
@goodnightrider Ай бұрын
Do you know if the tension of the throttle cable can be adjusted? If so does that help the power on the taotao 124 quad? Mine is super sluggish right now no power and we just replaced the carb.
@goodnightrider Ай бұрын
sorry 125
@brokemexicanreviews Ай бұрын
Do you have IG and you can send me video of what it is doing? Also throttle can but adjusted. Link near handle bars is adjustable
@PrestonWeber-b9u Ай бұрын
How do you wire in the choke? Bought a coolster 150 has a carb with a red plug unhooked
@brokemexicanreviews Ай бұрын
The carbs I buy are manual chokes. The aftermarket harnesses that are sold online…the ones I install…don’t have a way to wire chokes.
@PrestonWeber-b9u Ай бұрын
Awesome thanks for the quick reply. I’ll buy a different carb have a link for one?
@brokemexicanreviews Ай бұрын
It is linked in the description of this video. kzbin.info/www/bejne/aancfJJjgrx7qdU
@PrestonWeber-b9u Ай бұрын
Got it thanks. Ran into another issue. The valve cover has a line coming off of it but no where to run it too any ideas?
@johncurtis6988 Ай бұрын
Where did u get the throttle cable from? Everywhere I look is a scam website
@brokemexicanreviews Ай бұрын
Cable I used is linked the description on the video. It is an Amazon link that takes you directly to the products I use in my videos. Thank you.
@natejorgensen8596 Ай бұрын
Helps a lot thanks!
@brokemexicanreviews Ай бұрын
Of course brother. Glad it helped
@stevenliberg6321 Ай бұрын
Nees that long intake for my project ! Please update with where you got it
@brokemexicanreviews Ай бұрын
Not sure. Maybe check out Amazon. This one came with a quad I bought.
@Lookingforalowrankmoddedaccoun Ай бұрын
I’m new to the atv scene however I was curious if anyone could help out I purchased a 2020 coolster mountop 150cc model number 3150CXC I was told it needed a new wiring harness would this kit work for this atv ? Don’t dawg me please lol I’m new to this thanks in advance !!
@brokemexicanreviews Ай бұрын
If you have IG you can send me pics of the engine and I’ll be able to tell you if it’s the right harness. My IG is in the description.
@Lookingforalowrankmoddedaccoun Ай бұрын
@@brokemexicanreviews I did I have to wait for you to accept my invite it say thanks btw
@Zylxz. 2 ай бұрын
i’m looking for a coolster 150cc wiring harness where should i get it frm
@brokemexicanreviews 2 ай бұрын
The harness is linked in the description.
@TeeDee-r8f 2 ай бұрын
A maze ing!!!!!🎉🎉🎉
@brokemexicanreviews 2 ай бұрын
Thanks man. This video is doing decent. Hope it helped.
@fritzkennedycamille 2 ай бұрын
Fuchs with this review
@brokemexicanreviews 2 ай бұрын
This comment made me lol. Thanks man.
@Andrew-hh3ol 2 ай бұрын
Rockwell doesn’t exist anymore most all of these you see came from government aircraft fleet maintenance they are really good air ratchets but the only way to get spare parts is to buy another one for parts I own two of them one sits for parts and the other gets used
@brokemexicanreviews 2 ай бұрын
That is cool to hear. I didn’t know this. Thanks for the feedback.
@Superduty_Cam 2 ай бұрын
Where did you get the shifter?
@brokemexicanreviews 2 ай бұрын
amzn.to/3YlPAzd It is that same shifter.
@Superduty_Cam 2 ай бұрын
@@brokemexicanreviews thanks you
@ghouliesgarage3922 2 ай бұрын
Great Video ! ! Just thought about lowering my 2000 Bravada ( front is easy lol ) it looks like the 2' is the perfect drop. Did you notice a big difference in driving & Handling ? Definitely subbed , the link you shared goes to Amazon with just the blocks ? Where did you get your kit at ?
@brokemexicanreviews 2 ай бұрын
amzn.to/3BMgKqc These are the same ones I ordered. The u bolts are kind of long so I did have to cut about 1.5-2” off with a grinder.
@ghouliesgarage3922 2 ай бұрын
@@brokemexicanreviews awesome Thanks so much ! Really like the video ! Hopefully it will still drive well . I mean it's only a two inch drop
@d.8004 2 ай бұрын
I use this gun all the time, it's awesome! Biggest pain is thinning the paint
@brokemexicanreviews 2 ай бұрын
I should’ve thinned the paint I used. Also shouldn’t have used this with outdoor house paint😂
@vscolkitt 2 ай бұрын
My Coolster mini jeep (GK6125) has the 125 Honda clone engine. I purchased it new ($2800) and from the day I uncrated it, it wouldn’t turn over! Had a bad starter and solenoid! (Replaced them with Coolster OEM parts). Replaced the starter switch. I’ve replaced SIX starter chains since buying it, (some Coolster, some from Amazon). Looking at your starter chain replacement video has me questioning why mine keep breaking. Your starter chain looks pretty taught. Mine seem too long and I have more slack in the chain than yours. I think they are 62 links. My chain broke again yesterday, after about five days. They are a bear to replace because there isn’t much room on these mini jeeps. I usually remove the gas tank (positioned above the engine) and the left front wheel (for better access), but the steering column always makes the bottom stator cover bolt a bear to get out. Anyhow, I guess I’ll try removing a chain link and see if the chain will still fit? Every third or fourth key turn ends with a huge metal bang. After a few days and several metal bangs, I get the dreaded whirring of the starter motor! I’ve reported this (and other problems) to Venom Powersports and also to Coolster since uncrating it. They ask for videos and sometimes suggest inspecting this or inspecting that, or replacing this or replacing that (which I’ve always done, but nothing has fixed the situation. They won’t admit (or deny) they have sent me a bad jeep. I even replaced the stator ring. The original wiring harness (going to the ignition switch and other places was melted). it was wrapped in electrical tape. The replacement stator ring wiring harness was covered with a heavy rubber shield (like shrink wrap). Maybe the original jeeps do come wrapped in electrical tape? Makes me suspicious however! Also two of the four rear axle bolts needed loosened and the tensioner eye bolts needed adjusted because the drive chain was slapping the under-carriage of the Jeep a lot. However, I couldn’t remove the axle bolts because two of the four were stripped. Same with one of two of the tensioner bolts! I’m no mechanic but I’m sure getting a lot of practice repairing this blasted thing. Neither the company or dealer has been much help.
@brokemexicanreviews 2 ай бұрын
Bro this is the longest comment I’ve ever received😂 Do your starter chain have the plastic tension guides in place?
@vscolkitt 2 ай бұрын
@@brokemexicanreviews Sorry about the lengthy rap sheet! I guess I needed to vent to somebody who might listen (verses Coolster and Venom Powersports not being much help!) My two rubber starter chain guides are in place…. (even replaced them with one of the new chains I had installed). The rubber guides do not have a spring tensioner on them (like I’ve seen on other you-tuber’s channels). I was wandering about the really huge metallic bang that occurs with every other start attempt. I’m no mechanic but pretty handy at figuring things out on my own. After replacing the chain, the engine purrs along like nothing happened! Yesterday, chain #6 broke! It takes three hours to replace it! I was hoping you might have a suggestion on the Big Bang sound. It always occurs after attempting a one or two second start, then releasing the start key. As soon as the start key releases, I get the Big Bang ! (Maybe sometimes just before releasing the start key position?) I’ve replaced the starter twice (so a bad starter gear couldn’t be the culprit. The gear on the starter flywheel turns fine by hand… turning freely in one direction and not in the other…like it should!) The teeth on the starter flywheel don’t look worn either and no signs of metal shavings, but a little bit of rubber shavings from the rubber chain guides! Sorry to sound desperate, but this jeep was purchased brand spanking new and it has never worked! Now I’m looking at buying another new 125cc engine ($330), just to fix what should have been an easy fix! Also, with only about 20 total hours on this thing, I spent $500 on two service calls for a low compression problem. The head bolts were loose! Five minutes after arriving home, the head bolts were loose again! On my second visit, a new head and head gasket were installed), but he apparently didn’t hear the Big Bang sound? Just wandering if you’ve ever run across this scenario? Again, I apologize for the lengthy discussion!
@kriskaylor6679 2 ай бұрын
Moron
@beardedreviews 2 ай бұрын
Gotta keep the woman happy!
@brokemexicanreviews 2 ай бұрын
It’s a tough task man!
@jessicahartley174 2 ай бұрын
Finally primo🙏🏽 I haven't seen a video in a while.. Great job, keep it up.. I am learning things. Thank you😊
@brokemexicanreviews 2 ай бұрын
Thank you Jessica. Hope all is well.
@markpatterson2665 3 ай бұрын
Awesome video. One question though- I ran into the same problem with that brand being too short on the main cable. What brand did you by to get longer cable?
@brokemexicanreviews 3 ай бұрын
I bought the one linked in the description. If I ever need it to be long I splice a piece of the old harness into the new one using butt connectors and crimping.
@fernandoherrera1657 3 ай бұрын
Found an 01 Xtreme for 8k with 43k miles.. Think it’s a good deal ??
@brokemexicanreviews 3 ай бұрын
For 8k…I would buy it with that mileage. They are nice. Not the best gas.
@fernandoherrera1657 3 ай бұрын
@@brokemexicanreviews bro the guy sold it! If you ever wanna sell yours brotha you got a buyer right here.. I live in TX
@Kylecollinzz 3 ай бұрын
I think u should put ur ego in ur pocket and just come to realization that you are not inclined enough to be making these tutorials. I meam come on somebodys gotta break it to you. I didnt learn one thing watching amd listneing to that whole video. But i surprisingly made it through it and thats why im commenting...... Bro... learn about the bike alot more and maybe u can succeed at making a tutoral.... until then people not gonna no wtf ur talking. U have no clue about half the shit your TUTORING. come on man. And whoever said not to use carb cleaner.... nvm u got a mess going on here and ur head is spinning doing this. Call a mechanic bro.
@matthewullah8929 3 ай бұрын
My statur has 6 bronze and one white but the one I have ordered has 5 bronze and one white but says 6 coil will this still work ? Thanks
@brokemexicanreviews 3 ай бұрын
If you have IG, you can sent pics. Would make this a lot easier to explain.
@matthewullah8929 3 ай бұрын
Thanks
@thomwessels2281 3 ай бұрын
WHERE DID YOU FIND THIS GEM? I've had 2 Blazers and I WANT a 2004!
@brokemexicanreviews 3 ай бұрын
I found it on marketplace. Bought it from an older gentleman.
@satanicmasks3341 3 ай бұрын
Man I’m having a hell of a time compressing the damn spring cause I have nerve damage in the tip of my thumb
@brokemexicanreviews 3 ай бұрын
Sounds terrible. Hope you were able to get it.
@beardedreviews 4 ай бұрын
cant say gay...CANCELLED!!! :)
@brokemexicanreviews 4 ай бұрын
I meant gay as in happy🫶🏽🙂
@nicolec7290 4 ай бұрын
I replaced my stator & this one has 2 extra wires inside- green & red / & black. Please help what are they for ? Never mind you just answered it. Good video
@brokemexicanreviews 4 ай бұрын
Lmao ok. Please make sure to subscribe
@benjaminbusibenny6756 4 ай бұрын
You used it to spray house trimming?
@brokemexicanreviews 4 ай бұрын
We all make mistakes😂
@christinabeske 4 ай бұрын
DET MESTE AF HVAD DU GOER KAN JEG IKKE SE. HVER GANG DU ARBEJDER VED BAGHJULET HAR DU KAMERA PAA HAANDBREMSEN OG OMVENDT
@brokemexicanreviews 4 ай бұрын
Sorry about that. I’ll do better next time.
@marcomrtz15 4 ай бұрын
Do you have a link to the wiring harness with all the parts?
@brokemexicanreviews 4 ай бұрын
What size quad do you have? Would help if you can send me pics on IG? I can tell you exactly what harness you need.
@Edwin-rp5ik 3 ай бұрын
@@brokemexicanreviews
@JohnnyB64 4 ай бұрын
I bought one from a meth head too. $50. Just had to assemble it!!!!
@brokemexicanreviews 4 ай бұрын
Lmao. I probably shouldn’t have called him a meth head…but he was. Anyways your comment made me laugh. Have a good day man.
@Dollarblk11 4 ай бұрын
thank u sir . i think i have it from this point on .. i want pay not a nan another mofo to do this for again ..
@ThatThrottle 4 ай бұрын
Great video! Thank you! I will attempt to do the same on a new-to-me 2003 XL1200S sportster I just bought. It sat for years and Will only start with the choke on. I subbed! Thanks again!
@brokemexicanreviews 4 ай бұрын
Thank you and awesome. You sound excited about your bike. Hope it works out for you. There is a guy on here called “TwoWheelRocko” or something like that. He does some great tutorials on bikes.
@ThatThrottle 4 ай бұрын
@@brokemexicanreviews yes I’ve seen some of his videos and subbed to his channel too.
@bigdaddypat3697 4 ай бұрын
Hello sir, start off by saying I love your videos I've learned so much from them I'm wanting to get in to start flipping them myself question I have is where do you what's the main site you go to to order all your parts that way I'm ordering good parts and not junk ones
@brokemexicanreviews 4 ай бұрын
I typically just order everything off Amazon. Everything will last if it is taken care of.
@kalebmaxwell5261 4 ай бұрын
Can you use any Chinese kit pretty much for any Chinese atv? I have a redcat and not a lot of info out there
@brokemexicanreviews 4 ай бұрын
I’ve done a few Redcats. Below is the video you want. I have a bunch of step by steps on this channel for carbs, starters, wiring harnesses, etc. How to Wire a Chinese ATV- Step by Step- Complete Wiring Harness- DIY kzbin.info/www/bejne/b2e3iWCNjtZ9oNU
@kalebmaxwell5261 4 ай бұрын
@@brokemexicanreviews I used that video to do my taotao, wasn’t sure if I could use the same harness and do the redcat, (don’t see a brake pedal sensor for the harness, and starter has a female plug) appreciate you
@brokemexicanreviews 4 ай бұрын
If you have IG, you can send me photos… And I can tell you for sure if you can use that harness or not
@kalebmaxwell5261 4 ай бұрын
@@brokemexicanreviews no instagram I found you on fb tho
@ElvenReacts 4 ай бұрын
How come when I speak in the MV7X it doesnt pick my voice up unless my mouth in right up on the mic but you have distance from the mic and it picks your voice up. Have you got any additional set up for it? Did you notice the same problem?
@brokemexicanreviews 4 ай бұрын
Below is the video you want. Shows how to send audio through a mixer so the mic works better. Send Audio From a Mixer to an iPhone or iPad. Components in Description. kzbin.info/www/bejne/aWfVd2iOm6-UfaM
@Flow-pg5tw 5 ай бұрын
Why not poor new oil in when it's still open so it can cleanse it
@brokemexicanreviews 5 ай бұрын
lol because it pours straight out the bottom. Do you cleanse your car engine every oil change or just change the oil?
@tabathaelliott5590 5 ай бұрын
I used this wiring harness but can't find the right headlight to connect, I have 2 3 pin connections for high low I'm assuming. Everything I found is 4 pin. The atv is a single light, not double. Any ideas?
@brokemexicanreviews 5 ай бұрын
If you have IG, you can send me pics and I can show you how to hardwire it for a single headlight.