What size should the cables to the battery be? To a goodwe et15kw. The battery is also 15kw. Is it 6mm2? Is it possible to use a thicker cable since the inverter has mc4 connections for the battery?
@JasonWentworth-x5c8 күн бұрын
Do NOT buy from GoodWe. I run a small solar installation company and recently had a nightmare with GoodWe's MS-US string inverter. After 4 months of troubleshooting to deal with multiple firmware and hardware problems, I was forced to remove 13 GoodWe inverters and replace them with Solis units. I am now headed for a legal battle with GoodWe to get basic warranty coverage reimbursement. They are absolutely the worst company I have ever dealt with in the solar industry. Save yourself from a nightmare and buy any other brand.
@JasonWentworth-x5c8 күн бұрын
Do NOT buy from GoodWe. I run a small solar installation company and recently had a nightmare with GoodWe's MS-US string inverter. After 4 months of troubleshooting to deal with multiple firmware and hardware problems, I was forced to remove 13 GoodWe inverters and replace them with Solis units. I am now headed for a legal battle with GoodWe to get basic warranty coverage reimbursement. They are absolutely the worst company I have ever dealt with in the solar industry. Save yourself from a nightmare and buy any other brand.
@JasonWentworth-x5c8 күн бұрын
Do NOT buy from GoodWe. I run a small solar installation company and recently had a nightmare with GoodWe's MS-US string inverter. After 4 months of troubleshooting to deal with multiple firmware and hardware problems, I was forced to remove 13 GoodWe inverters and replace them with Solis units. I am now headed for a legal battle with GoodWe to get basic warranty coverage reimbursement. They are absolutely the worst company I have ever dealt with in the solar industry. Save yourself from a nightmare and buy any other brand.
@okurka11119 күн бұрын
No need for any 120Ohm termination resistor?
@mohammaduzair782919 күн бұрын
Is this for g3 ongrid inverter or any model?
@dinzfreiheit22 күн бұрын
Why it is so slowly? Shelly is giving me real time data. But with the good we EMS I need so long until the app will show me new data. How to get fast real data?
@vladislavkuzmenkovonninen456422 күн бұрын
How can a user monitor energy consumption by phase? I recently installed the HomeKit 3000 and would like to know if it’s possible to view the energy consumption for each phase separately. Technically, it should be possible, as voltage and current values for each phase are collected individually.
@CACETOTALCAECTOTA24 күн бұрын
Como receber todas lives Goodwe?
@KutsiTekin29 күн бұрын
We Want to Learn About Tommatech Lifepo4 48V 102 Ah G2 Model Battery Compatibility
@jamesarevalo1626Ай бұрын
I have encountered an isolation fail then my inverter won’t turn on. How can I troubleshoot? 😢
@mahersalama3384Ай бұрын
👍👍
@KareKZАй бұрын
Здравствуйте.У нас гудви 5ЕТ. Невозможно запретить отдачу в сеть. Только от АКБ не включается. Постоянно идёт перенапряжение батарей 2шт тоже гудви. А если включить 2кВт отопитель то батарея показывает разрядку уже через несколько минут. Можете посоветовать как перепрошить инвертор или б.у.АкБ?
@CM9jaАй бұрын
Where can I buy this online ?
@chimeranzl9147Ай бұрын
Connecting ES Uniq to BasenGreen enclosure with 15KwH batteries. Have set battery side to Goodwe. What battery setting to use on inverter side?
@krzysztofadamski8394Ай бұрын
Dodam jeszcze jeden magazyn który współpracuje z goodwee. ,,Leapton,, Sprawdzone
@HappyAyeHappyАй бұрын
what if my inverter doens´t finde the Lynx Home u Battery in the list of goodwe, but i see all other Home models, only U its missing ...
@hanghubofficial1046Ай бұрын
Where can I get direct sourcing from Goodwe inverter
@funmilayograceolagunju2671Ай бұрын
Hi i like ths video
@funmilayograceolagunju2671Ай бұрын
This inserting,wiring connection and installlation is intresting
@sandeephindusthan2 ай бұрын
Please post a video of good we GW4200-DNS-30 type inverter installation and working.
@rafabaszczyk50182 ай бұрын
czy magazyn może zostać zainstalowany samodzielnie zgodnie z instrukcją, czy wymagane jest aby zrobił to instalator?
@GoodWeSolarAcademy2 ай бұрын
Hello, you'd better let the installer do it.
@bartomiejrompca15502 ай бұрын
Witam. Czy falowniki serii ET mogą pracować bez baterii i podlaczonego licznika? Chodzi o to zeby pracował na razie jako zwykły ongridowy falownik z późniejszą opcją uzupełnienia o baterię
@GoodWeSolarAcademy2 ай бұрын
Hello, the battery is optional. But you'd connect the meter.
@osvaldomiranda-tb5dx2 ай бұрын
fantastico
@RAEPinoy2 ай бұрын
if SEC1000 can support than 1 inverter connected in DC chain RS485 communication in 3 phase system how about the single phase what model of export limiter that can support more than 1 inverter?
@GoodWeSolarAcademy2 ай бұрын
Hello, we currently do not support multi inverter export power limit in single phase system. We have plans to launch this solution in the future.
@marfil1123 ай бұрын
Con el modelo sm3000 se puede hacer lo mismo conectado a un ongrid?
@GoodWeSolarAcademy2 ай бұрын
SM3000 does not seem to be our company's model, but most of our products can be connected to the Internet.
@mahersalama33843 ай бұрын
👍👍
@irfannaeem96683 ай бұрын
Is it ongrid inverter?
@GoodWeSolarAcademy3 ай бұрын
yes, you can get more infos here. en.goodwe.com/ms-g3
@jiriniewald53293 ай бұрын
Please propose phone for the best configuration of GW11k/GW22k. On the Samsung Note8/10+ is issue to set network settings-wifi. Setting always failure. Please propose mobile phone for the best configuration.
@GoodWeSolarAcademy3 ай бұрын
Hello, you could ask aftersales to help deal with the wifi issue. goodwetechnology.zendesk.com/hc/en-gb
@Drezeraaa4 ай бұрын
A senha padrão esta dando erro aqui
@Drezeraaa4 ай бұрын
Ja resetei mas nao vai
@GoodWeSolarAcademy3 ай бұрын
Hello, you can create a ticket to ask aftersales to check the wifi issue. goodwetechnology.zendesk.com/hc/en-gb
@airtonfelipe98294 ай бұрын
Quando cliente não tem mais acesso perdeu login passado pela antiga empresa quando criar planta nova preciso excluir planta antiga para inversor se cadastrar na nova planta ?
@GoodWeSolarAcademy3 ай бұрын
Hello, you need to contact our aftersales to change the plant. goodwetechnology.zendesk.com/hc/en-gb
@alle20vt4 ай бұрын
I wouldnt call this remote config, most of the onsite config isnt possible to change remote. You should really change this
@GoodWeSolarAcademy3 ай бұрын
Hello, could you tell me which model of our inverter you use?
@sectronic29474 ай бұрын
Does the GW10K-ET support three phase asymmetric true physical zero export? Regulated by state that no power should go back into the grid (not sum zero) but true physical zero export?
@GoodWeSolarAcademy4 ай бұрын
Yes, it can support the three-phase unbalanced output function. Our inverter can prevent energy backflow to the grid with the anti-backflow function.
@sectronic29474 ай бұрын
@@GoodWeSolarAcademy sounds good. In the pdf papers it doesn't mention anything like that
@MotoLen514 ай бұрын
Every time the house (and inverter) has a power outage, the inverter loses the wifi SSID and password (for the SSID of the home network that connected to the internet). What can be done so that the wifi configuration is not lost?
@GoodWeSolarAcademy4 ай бұрын
Hello, you can ask our aftersales for the wifi issue. Click here: goodwetechnology.zendesk.com/hc/en-gb. If you have other issues, you can also freely talk in our forum. community.goodwe.com/Forum
@MrElofix4 ай бұрын
I would like to know why i have to cut off the rj45 connector and use the bms connector instead. In the byd battery manual there are two options. One with the rj45 plug connected to the can bus socket and the other option is the one you showed here. My problem is that i cant get the battery running. I always get a connection failed message when i add the HVS Battery in the app. Any ideas whats wrong? I would also like to know why there is no link for Firmware download on the Goodwe website....
@GoodWeSolarAcademy4 ай бұрын
Hello, you may first check the version of firmware. If you don't know if it is the latest version, you can email us via [email protected].
@ruaharo4 ай бұрын
parabéns Pessoal pela qualidade do vídeo e a didatica utilizada. 👋
@ruaharo4 ай бұрын
Parabéns pelo vídeo pessoal!
@syedharoon28545 ай бұрын
great
@ferrysantoso98375 ай бұрын
This ET series is Low frequency or high frequency inverters?
@GoodWeSolarAcademy5 ай бұрын
ET series output three phases AC voltage,the frequency is 50/60Hz
@tomtinkertv7305 ай бұрын
Does v1 of the WiFi Lan kit support Modbus TCP? Or is this only with v2 possible?
@GoodWeSolarAcademy5 ай бұрын
Hi, you can ask sales in your region. en.goodwe.com/contact-us
@Kashivishwanathan5 ай бұрын
My Trinasolar Solar inverter is not getting connected with the SEMS app need help
@GoodWeSolarAcademy5 ай бұрын
Hi, you can create a ticket for aftersales's help.goodwetechnology.zendesk.com/hc/en-gb
@ebutemi34755 ай бұрын
Hi GoodWe Acadamy, I extended my LX F9.8-H to a LX F16.4-H battery by two additional battery modules. The SEMS Portal app is still showing 9.8 kWh as battery capacity, what do I have to do to change the settings, so that it is displayed correctly? P.S. The Solar Go app is displaying LX F 16-H as battery.
@GoodWeSolarAcademy5 ай бұрын
Hello, Maybe you chose the wrong option - PYLON according to the video above. Try to select GoodWe battery first.
@ebutemi34755 ай бұрын
@@GoodWeSolarAcademy Are you serious? I see the correct capacity of my GoodWe battery in the solar go app after extending it. But the Semsportal is showing the old capacity, and of course I selected GoodWe as battery.
@monterwHolandi5 ай бұрын
Mam goodwe seri 3kw dns i jestem zadowolony. Teraz chciałbym przejść na et plus. Czy ten styk dodatkowy obsłuż grzałkę np 2 kw ? Mozna tak go ustawic aby przy produkcji np 6000w kierował 2000w na grzałkę?
@GoodWeSolarAcademy5 ай бұрын
Hello, it needn't additional contact, and it directs 2000W to the heater.
@joaocarloskist6 ай бұрын
Já troquei todos os cabos CC, os módulos estão em estrutura metálica no chão e a estrutura está ligada junto ao aterramento da rede e junto ao aterramento do inversor. Devo fazer um aterramento a parte pro inversor pra parar esse erro?
@GoodWeSolarAcademy5 ай бұрын
Hello, you can create a ticket for aftersales' help. goodwetechnology.zendesk.com/hc/en-gb
@sahson016 ай бұрын
Can we see the results of two inverters together?
@GoodWeSolarAcademy6 ай бұрын
Hello, if you use the communication module, you can only set up the power plant separately on SEMS and see the monitoring data. If you use a data logger, you can see the monitoring data of multiple inverters connected to the data logger in one power plant.
@blacklividus16886 ай бұрын
i want to change from WI FI kit to a LAN KIT.. but when i connect the lan kit to the inverter it stops working....How could i restore the factory settings of the inverter to do a new installation from scratch?
@GoodWeSolarAcademy6 ай бұрын
Hello, you should ask aftersales to help deal with it. Click the link below to create a ticket. goodwetechnology.zendesk.com/hc/en-gb
@blacklividus16886 ай бұрын
@@GoodWeSolarAcademy GW10KSDT-20 it's a string inverter not an hybrid one
@katakouzina6 ай бұрын
where can we download firmware updates?
@GoodWeSolarAcademy6 ай бұрын
Hello, you can ask aftersales for the update. Just create a ticket here: goodwetechnology.zendesk.com/hc/en-gb
@katakouzina6 ай бұрын
ευχαριστω. αν και δεν καταλαβαινω γιατι δεν ειναι δημοσια διαθεσιμο@@GoodWeSolarAcademy
@james1303626 ай бұрын
can I connect my solar panels in parralel with a Victron solar charge controler
@GoodWeSolarAcademy6 ай бұрын
Hello, the model is not our brand. You can ask Victron for help.