Wind was quite light 20km/h ish, AUW would be 100kg so 6.25 kg/m^2 projected. Trim speed is roughly 45km/h, Trimmers out 55km/h ish. I'm at the very top of the weight range for the wing. The ideal wind is 30km/h gusting 40km/h for this wing.
@Ruffrider193314 күн бұрын
Nice...you didn't crash on the beach yesterday did you? I heard someone did...
@Mrsargent442712 күн бұрын
Nah, might have been one of the hang gliders maybe? They were flying after me was 5-6 of them. If you have any details I.e colour of the glider I would be interested to know. I'm the safety officer for the Wellington club so always trying to keep track of any accidents and look at ways to minimise risk when flying these local sites.
@Ruffrider193312 күн бұрын
@Mrsargent4427 the local volunteer brigade attended...they'll have the details I guess...I think it was a glider and he was pretty messed up apparently
@Ollie271515 күн бұрын
This New Zealand?
@Mrsargent442715 күн бұрын
Yip, bottom of the North Island on the west coast.
@Ollie271513 күн бұрын
@@Mrsargent4427 I knew it the flax gave it away but that paragliding of the ground was awesome
@matttoal71063 ай бұрын
Auw?
@Mrsargent44273 ай бұрын
Roughly 100kg, so wing loading of 6.25kg/m^2 projected. Not sure of what the trim speed would be with the trimmers in but would be around 45km/h.
@peterdoile6 ай бұрын
hey bro awesome upload. could seem house from your point of view... whats the beeping?
@Mrsargent44276 ай бұрын
It's my vario, beeps when I'm going up and single tone when I'm going down. Helps me find thermals as that day it was mostly thermal lift with not much dynamic lift off the hill.
@ParaSaxon7 ай бұрын
I'll bring my gear next time...🎉
@BrianMorris-b3u8 ай бұрын
Well done. You got higher than I did. Mine was 13 minutes of good fun
@mrvisigods11 ай бұрын
carb sync are cheap and great for this carbs .
@aleksbogdanoski25513 жыл бұрын
i put a few cans on degreaser in the intake exhaust ports and pressure washed everything
@chanuperera76123 жыл бұрын
When I put the clutch in the gear of my Honda MC22 RR bike, the neutral bulb lights up, I replaced the diode but the problem is the same, thank you for providing a solution
@patrickmckowen29993 жыл бұрын
Great info 👍 What do you fly? Cheers from Richmond Hill, Ontario, Canada
@Mrsargent44273 жыл бұрын
Gin Atlas 26m+ gin verso 4 harness, currently a new pilot so only have 20 hours. Wanting to eventually fly mini wings as where I live (wellington NZ) its usually slightly too windy for a full size wing.
@jeffro28404 жыл бұрын
I will be doing this soon, and this vid helps me alot immensely! Awesome work!
@erickcueva19684 жыл бұрын
Yo le saque la culata sin ponerla en punto ni marca del cigüeñal, ahora como la armo?
@disnasandeep31234 жыл бұрын
good.keep it up👍
@oshangayanga74994 жыл бұрын
Ticking you heard could be coming from the Shims. Does it go away after engine warms up ?
@Mrsargent44274 жыл бұрын
Nah still ticks just the same randomly. Strange thing is it's gone now when I put it back together. When I measured all the clearences for the intake shims they were all almost exactly 0.16mm and every exhaust shim was almost exactly 0.23mm except cylinder 4 which had one at 0.25mm. So all shims where in spec. Someone on the Facebook page suggested it could have been the coils arcing randomly. Dunno it's gone for now at least.
@XmaltezX3 жыл бұрын
@@Mrsargent4427 mine was doing that noise and it was dropping a cylinder changed coils and new spark leads went away and hasnt misfired 400ks later
@axle7743 жыл бұрын
@@XmaltezX yea think when I put it all back together I must have jiggled the leads enough that the connection is better. Hasn't made the noise since I made this video.