I'm no gun Smith but I believe a torque lubricant would be better

From my research the barrel nut with the wrench should be torqued to 35ftlb. Clamping down on the barrel that much is excessive. If the insert was made from Delrin then there would be no chance of marking the barrel and the Delrin would provide plenty of grip when the nuts were torqued to 100ftpb.

Buy only a go-gauge after setting just put a piece of tape on the end of it now you have a no-go-gauge

Beautiful work

over kill on securing the vice down.

I suggest people starting out get a four lug barrel vice, than you don't have to crank the bolts with a pipe on a wench.my goodness, and wrap the barrel with leather to keep from rotating.

I thought all Savage model 12s were large shank.

u need to hold the receiver not the barrel to loosen or titn barrel nut

I’m getting ready to swap my 30’06 barrel out for a 35 Whelen..on a Savage Axis. Wish I had those shims..ER Shaw made the new barrel and I went with them because they include a barrel wrench and go/no-go gauges. Your video really helps me to visualize the process and I’ll keep my iPad handy so I can refer back to it. I’ve always wanted a bolt action in this caliber…have had an H&R Handi Rifle in this caliber for about 20 years. Never swapped a barrel before, that’s why I’m starting simple and cheap. Thanks for the video.

Best video I've seen and start a journey from Thank you for the years of experience

********DANG WHAT A CHEETER PIPE*****!!! ISIT BIG ENOUGH ????

I cut the tube into small wide rubber band like sections looks like shit but also feels good and kinda looks cool and easy to put on

The "factory" goop is likely anti-seize compound. I also like to put some on the threads when I reassemble the barrel because it has a much higher temperature tolerance than petroleum based pubs

COULD YOU USE THAT TYPE OF WRENCH FOR A Marlin XL7 BARREL?

Really great video. I’m going to do this myself for the first time in the near future and this is the perfect tutorial. Thanks.

That’s not a pipe… THIS is a pipe.

absolutely filthy working environment. I would not let you work on anything I have.

17:28 why do you keep replacing the barrel nut wrench? Just spin it 360°

Snappy you ever shot a ultralight 38 with +p now that's snappy

Found out the hard way not knowing where the end of the post driver was, a heck of a gash on the head.

put in hot water

It'll be good to use a piece of extra inner tube to put in between the vise and the gun to keep it from getting over tightened¯\_(ツ)_/¯

Man that's a shit load of ticks in just one single field. Great video! Got bitten by ticks 2 times already!

Is that wire or cable and what kind

can you rebbarrel savage model 111 30-06 to 35 whelen 458 win mag 375hand h

Excellent presentation! My only question is, would you ever run the barrel nut down with a torque wrench to a specific poundage, like you would with an AR platform?

What action wrench are you? I don't want to buy a weak action wrench that deforms after one use!

I used to get chilblains on my toes when I was young. My grandad said walk bare feet in the snow for a few minutes long as possible. Mmm snow came and I couldn't bare the itching anymore so I did it. It worked I haven't had them since. 😀

I feel your pain, I’ve got that as well.

Does anyone know any itch relief because I am dying

Just put some channelocks on that trigger and spin it off. 😂 Just kidding. Awesome video!!!

Oh wow your hair is short lol, i'm going to watch your videos and sub to you God Bless you

May I suggest a torque wrench instead of Fred Flintstone methoud?

on a savage model 11 30-06 could you replace the bolt face and instal 300weatherby mag barrel

Thanks for posting. It' a great video, but MAN!!! You got the barrel vise so OVERLY tight. I'd be afraid to shoot that barrel. Also an impact gun set to a specific torque would work better and faster than your crazy wrench and highly inappropriate "cheater pipe".

Instead of a mallet, use a half inch ratchet, thats what the squares are for.

We can clearly see by the state of your bench, you Got Out Of gunsmithing, what are you doin now ?

Ok I know you call that a box end wrench. I'm trying to find the same thing online, is there possibly a different name it would be under? I'm having difficulty locating one.

I will try to do it with Woodprix plans.

You must put the collar on dog first few days at off position. So they dont learn is a schock collar.

The best so far... wish it had diferent schock setting set at diferent level... both dogs dont have same level of intesity.

Thank you for the video, I learned a lot.

What did you make your shims out of? I'd like to get some. Thanks

Walking in the frost will cure your chilblains. I've done it every morning in winter for the last 15 years. I used to suffer terribly from chilblains on the ears and toes every winter and my dad said go out in the frost and stand there for a few minutes and they will disappear in a couple of days. He was right......I haven't had chilblains for years......

The force you applied to that Barrel vise is probably excessive for a Savage action. Savage actions are pretty easy to disassemble. Now a Remington 700 action that's never been apart, I will say yes, use that much force

The itchiness and the prickiness is much worse than actually getting it. No sleep and constantly scratching on them are hell !

Helpful Thanks

Not good.. Next time try. Bat ruber grip. Is cheap and looks good

If I am planting a small grapevine in it's first year, at what point do I need to build a trellis like this?

righty tighty lefty loosey