Thanks

Thanks for this video. There is a way to open the EPB and put it in service mode manually and I really didnt want to do that. I just realized my bidirectional scanner is capable of doing this the way you did to retract the piston!!

Can you help me please!!! I changed my filter on my 2014 2.0l Jetta and it doesn’t start

Too fast; i cannot follow assembly

Do you still have the instructions and if so, does it say anything about clearing an E1 error?

I’ve been using nailers for years. Most jams are the fault of the nails not the tool. Thank you for this video! I have to install shoe molding in my Mother-in-law’s house this weekend and will feel better knowing she won’t have to jump every time my compressor comes on. Right now Harbor Freight has the usual sale on, so I’m getting another Bauer battery and charger too. One suggestion; always get the 5Ah battery, unless you only need a backup. Thanks again!

nope

This thing almost pulled my arm out of socket one when i was putting a clothesline up lol

I thought this was supposed to be instructions for mounting onto a "truck". Will have to look further for a different video.

Can you use tap water or does it have to be distilled water?

Can you tell me I have a mini split Mr. cool she is freezing up at the filter on the inside? it is about year and a half to two years old worked fine. About 30 to 40 minutes it'll start to freeze up.

Sounds good. I usually use Immersive Translate to help me translate texts or videos online. But it cannnot work without WIFI. Next time, I will try to use this new tool offline 😂

Thank you. I found this super helpful.

what is the name of the app and can the vr headset used with the holy stone hs175d drone?

❤❤❤😊

Thanks for the vid! Just got one for myself and my dad

Thank you so much for this video!

What is that little black metal piece that goes inside the burner control called? Do you know where I can get one to replace a lost one? TIA

sir,why this clock auto shutdown...and how to fix this?

thanks for this

Bru that tank needs a few snails and or bottom feeder fish

I’m planning to order this but my outside unit has two zones and I have 4 connections instead of the 2 shown here. Does that mean I need to buy two separate kits and add refrigerant to each line separately?

Maravilloso aprendi

At least that was not your first layer.

My DC44 Animal does not have the screws in those places and they differ by being Torx type screw heads also

Is this the same for a 2018 Traverse

Just installed a new air handler and had to disconnect and reconnect the fittings. Do I need to purge the air out of the system first before I charge? I see this done on other videos and I want to make sure I’m doing this right.

Worked perfectly!!!

I bought a swimming shirt from temu also I need it for my swimming when i was partnering this boy called Gauthan and then I came up with idea so that’s the end of my story 😊

no info, poor video... Just saying...

Man tell big guy behind camera take a knee😂 but you definitely just saved me from being hot as balls tonight. How you supposed to sleep at 74 degrees?

Great video, thanks for taking the time to share this. 👍

Hi. Any rainbow effect, for example in subtitles with black background?

WD Cloud Home is probably the worst thing that I've bought in recent memories. It just keeps disappointing.

How come you keep calling that laser thermometer a HEAT GUN??

Thanks brother

Is there movement when rolling on or off it? I have motorcycles and scooters. I’d love something like this for them to be parked on in the garage.

Thanks for the tutorial. I bought 3 cans each of eggs, butter, potatoes and strawberries back in March 2020. Figure I might as well start using them. BTW, have you ever replaced the water with milk? I'm thinking the eggs might be fluffier, but I'll need to test that.

Thank You very much for the video. Just 1 question if I may. How much movement should the vent cap have going "up", 1/16, 1/10" ? Mine spins freely, but only goes up maybe 1/16 of an inch at most.

Upload in 4k if you can. Nice view.

So can i sue your for blinding me what your sun god uv light

I hate those clamps. Simple job made difficult struggling with the clamps

Hi Brian, thanks for sharing. I've been looking at the Sora for a while, wondering if it would be a good candidate for upgrading some of my old 105 and Ultegra 9spd projects. I restore a lot of vintage bikes, and the Shimano 9spd is one of my favorite systems. Although I can usually rejuvenate the shifter mechanisms, replacement hoods are becoming non-existent for 105's, Ultegra, Dura Ace. Sora has the more modern bracket shape, which is more comfortable in the hand when riding on the hoods. I noticed on your bike that the bar tops are pointed down towards the front of the bike, you might want to try rotating the bars up in the stem before shifting the brackets up and hassling with readjusting cabling and retaping the bars. I've noticed a lot of newer bikes are setting the bars so they're pointing slightly upwards towards the front of the bike, with the hoods level with the bar top, or angled up slightly more than the bar top. Again, thanks for sharing, this 69 year old, wrench wielding, crank turning, bike building maniac enjoyed your video, and will subscribe to your channel 😁

Belke din BLASTER su monke batta ? Bonu diu SAND fe puko batta. Pues din wi nigre batta.

Would having a bent frame cause front passenger tire wear on the inside? I've had two alignments done but still car pulls to the right.

You sound like the mecanic that replaces parts till you find the problem. Amount to a massive bill!!!

Hey bud. You gotta season the inside of the wok more. Need to have that nice dark patina to know it’s done.

i have a 2006 chevy cobalt tends to ride a little rough would adding new control arms make the ride better or a little smoother .i already have new shocks and spring in the rear.

hose is too short to be used on car.............

You never mention how long the cord is or if the come with a longer cord