Thanks Skip.

Thanks Couz.

Thanks Skip.

Good timing. I just posted Part 4 video. A few bumps along the way but happy with the results. I made both defroster ducts from 20 gauge sheet metal because the Vintage Air ones would not fit. Good luck with your build and thanks for watching. Part 4 here.______kzbin.info/www/bejne/iX29pZJpZdiKlas

Thanks for the update. You gave me some good ideas - but no way am I going to plumb with copper!😂 Very impressive! Since my interior is completely stripped and nothing under the dash hopefully, I'll have a few more options getting through the firewall.

I'm not sure exactly. I don't work very fast. I guess it depends on ones skill level and experience. Thanks for watching.

Because in that location, the hood would not fully close. The lift support bottomed out first. Thanks for watching.👍👍❤

I knew it would come out the top if the trans could be raised and nudged a little to the Drivers side. Also, I take some photos and try to bag/label fasteners and brackets to make assembly easier. Thanks for watching.

Awesome! Thanks for watching.

You can do it! Thanks for watching.

Thanks for sharing

Thanks Ron. My LeMans still has it's factory Dearborn 3 speed transmission with the Hurst shifter. The transmission actually says "Fomoco" on the casting. Thanks for watching.

@patrickharrand There's an awesome book available explaining everything about every carb & how to tune them. Tuners I've read on the internet refer to HPBOOKS "ROCHESTER CARBURETORS" by Doug Roe. Quads and Carter AFB 450s like mine are unbelievable for power and economy if tuned correctly. More CFM is not better. Summit offers Power Valve springs, jets, main & secondary rods, secondary rod hangers, etc. Quads give fuel when the engine is ready. My son & I had awesome luck with this book. The first thing we did was to get rid of the Quadra bog. Good luck, Patric. Ron

Scott also did the Voice Over for the PeeWee Herman figure.

@@patrickharrand ha!!!

Appreciate it

Thanks! 👍

The 15" seems to work ok. It wouldn't hurt to go a bit higher on the lift amount to maybe 110 pounds. I know these tend to weaken over time. Thanks for watching.

Thanks Steve.

We are close to the same age you and I. Thanks for watching.

Thanks Steve.

Yea, it needs something. Good idea. Thanks Andy.

Thanks Skip. Happy New Year.

They are 15" 100 lb lifts. The part number is 445N. Thanks for watching.

I had to evacuate the system. Thanks for watching.

Awesome! Thanks for watching.

I think it was Silicone Grease. Thanks for watching.

Glad it helped! Thanks for watching.

Thanks! You too!🥰

Thanks Skip.

Wow! Most interesting and very nice mod work.👍

Cool, thanks!

Thanks Skip.

Thanks!

I appreciate that!

Awesome! Let me know how it turns out.

Just finished the console! Came out pretty nice! I had some of the same creeping crud on the "chrome" console body, and was able to mitigate most of it, not perfect, but very well within the acceptable range for me! Someone had locked, then lost the key to the console, so they really damaged it when they forced it open. I had to replace the hinge, hinge shelf and hardware as well as the lock and spring. I also replaced the "woodgrain" and it came out fantastic! What a difference! I tried to rehab the console box as best I could. The original interior material is way gone and I'm trying to figure out what I can do to make the interior receptacle@@patrickharrand

Awesome! Thank you!

Coming soon! I did a front suspension rebuild late last fall and just got that bolted back in. Alignment next and I'll post the video. Thanks Skip.

@@patrickharrand Look forward to it!

Thanks Skip.

Thanks Andy. I love it when a plan comes together.