Where does the room air fan inlet? Is it a pipe, or grills on the side of the unti?

What tools would I need to make my own?

This video belongs in a museum, this generation will never understand. Just a raw video with no irritating music like TikTok. Im 17 but this video makes me feel old ahahahaha.

Great video. I couldn’t find mine. Apparently the previous owner took it out and never put one back in.

why is my upper auger turning every 7 seconds,in stead of 17. Setting on 1,TY

Mine is an easy1997 Warnock hershy model number 25 pdv does anyone know where I can get a manual?

Thanks!

You are stupid

Help?? The top auger motor on my Englander continuously turns, it does NOT turn intermittently as it should; thus it just keeps pouring pellets into fire box. It’s as if it is receiving constant power. I have the back off the stove and can see the motor/auger just keeps turning & turning. Any ideas of what could be causing this? Thank you so much. The model is an Englander 25-pdvc/55-shp10.

This video is excellent. Thank you ❤

The lower buttons on the control board (Low Fuel Feed, Low Burn Air, and Air on Temp) are not meant to be adjusted during normal operation of the unit. These buttons are factory preset and can not be adjusted by the user.

Worked thanks

Question: No green light at on button

This is the absolute best explanation of how the Englander control panel works. My son and I thank you for making this video and sharing it. It has cleared up so much. We kept having his Englander 25PDV spit out pellets on setting 9 and the fire was massive and unbearable heat. Then when you stepped it down one to 8 or anything else below. It would burn up those pellets before the next load would arrive. Basically, we called it a cycle which lasted about 15 mins. Now, we have it feeding a proper amount without any pause. The factory 6-4-1 setting just wasn't working. I believe the bottom auger spins slightly faster than the top can manage. I get a full rotation from the bottom auger in about 40 seconds rather than one full minute. It's a 1 RPM CCW motor. It just seems to move slightly faster than it should.

my controler are stock all adjustment at 1 and i cannot change it

You are the best

Dear Sensei: Please bring back the Wood Blank. I appreciated what I learned from your videos and would want to buy the blanks from you!

Amen

Omg! Thank you so much! I was about to cut wires! Then worse off it's on the owners manual?!!! This has been driving me crazy for years. Happy day!!!!

Where do you find these?

Not fords fault you don’t install a filter … Here you go: kzbin.info/www/bejne/hpyyd617fcype9E

so that black grill is not needed any more once the actually filter takes its place ?

Pretty sure that motor you pointed to on the side is the exhaust/combustion motor

Them darn chipmunks lol thanks for the info

Vagabond brought me here

Awesome Vid. Keep up the Great Work !

Best video out there for these control it was very helpful my pellet stove was set to fast so it wasn't burning the pellet the whole way

Thank you for this ! So helpful :) just got my first pellet stove and the operations manual tells you what the buttons are for but not how do use them 😅. This was so helpful really appreciate it

I have an englander for our house. It came with it. This should heat our 1350sq ft house no problem! But it doesn’t. Sounds like the blower isn’t coming on? Would that effect it enough not to heat the whole house?

Excellent video!! I have a ip25 new englander. Great stove. I have just hooked up a wifi tstat to it . I keep it clean. Blow it out weekly. Was having a lot of e2 codes. Ran the fresh air pipe to the outside of building and it runs better. Hotter. No errors.

Thank you! I just bought a farm and there’s a pellet stove in what will be my new workshop. I have no clue what I’m doing. Couldn’t even keep the pellets blot when I tried earlier 😂

What does a U code mean?

Sir, not sure if you’ll see this comment but thank you!! Ive had my stove for three years and am kicking myself in the ass for not adjusting my stove to its optimal settings for what I need. I can’t even explain how many bags of pellets I’ve completed wasted!

Is that Steve Wood as uke?

Running on low heat/blower speed, how long should a bag of pellets last?

My only question is I want the pellets to drop dollars less often so the higher the number is the less the pellet strap down, correct

Thanks I’m new to this stove it came with my apartment. No instructions and your video. Just explain everything I needed to know. Thank you.

Thanks for this Video!! finally i understand how to properly adjust my Englander pellet stove.

Seriously? You cut the only parts of the vid anyone would need to see

Horrible video. Story over

This was a terrible description. You didn't explain how to make the air coming out of the blower hotter

Perfect Installation on what seems to be a confusing issue. I too have a 2013 XLT Transit Connect Van and like many I was surprised to find no filter when I bought it used and figured someone took it out and never replaced it. And when I did get a filter it was too big for to fit in the cover. For whatever the reason FORD did not always put a cabin filter element in every Transit Connect Van. But remember - this is a globally distributed Van so somewhere out there a certain market or model gets a filter. FORD and most after-market suppliers make a filter and … and they all are too big to fit in the cover. That’s because the cover was used in non-element models to keep leaves and debris out. As demonstrated here, if you lay the filter on top of the intake for the air system, you will find it’s a perfect fit. In other words - Toss the hard-plastic cover as it was designed for non-element applications.

Englander is supposed to have the best customer service, give them a call.

That's tellent!

I have a similar stove, Im using a bag 40# every 12 hours on the lowest setting. No matter what setting the auger doesnt slow down.

The fan your talking about on other side is the exhaust motor. The make up air is little port in back that sucks air into the burn pot.

thank you so much for this video series.

The mesh screen at 2:05 is doing the work keeping the leaves and large particles out that could clog the system. Ford deemed that enough. Although it might not trap small particles of dust etc going through these would naturally enter into the cabin, however I have never had any issues with the cabin being filled with dust etc, I guess it helps the system as a whole being less restricted / having better airflow. I was going to buy one but I am now edging towards leaving it stock, now that I know they aren't meant to come with one.

This is great!! I have a Timber Ridge that I bought around 2015. Looks like the same panel. Wonder if it works the same. Really interested in that far right button...

I have a 2013 New Englander pellet stove where the low burn is factory set so my pellets overflow in the burn pot