my emblem starting to turn yellow. Ill probably do this soon.
@thedarksecrets-official5 ай бұрын
maybe apply tape around the emblem can minimize damages
@thirasakkruthern86096 ай бұрын
Complicate job
@mercedeslove4291 Жыл бұрын
Put a couple of layers of duct tape around the badge before the prying, will do less damage
@FroztiProductions Жыл бұрын
I don't like how much the pleather gets damaged in this process. Ima just scrape the fake chrome off for better adhesion. I could also make a note of where the tabs are and drill into each, shallow and wide. Then a pick might pull the logo right off.
@Drupra88 Жыл бұрын
How has this been holding up. I want to do the same with my Toyota steering wheel but im worried it won’t stick long since the oem badge is partially recessed in grooves
@robcarter533 Жыл бұрын
😡 FYI: Everyone fail to realize why those emblems are made into that cover. It is a safety measure in case that airbag ever deployed. The force will send that emblem flying directly to your face and possibly put your eye out! I'm just saying!😲
@ECW420 Жыл бұрын
The jdm emblems are so nice. I just put one on the steering wheel of my Element.
@Fitguy-dq7wk Жыл бұрын
You seen the carbon insert to replace the silver insert on your wheel that would look good with the new emblem
@tudoilvarieties1730 Жыл бұрын
Thanks for sharing...
@osorioarevir5742 Жыл бұрын
Poor steering wheel
@osorioarevir5742 Жыл бұрын
Worst video ever 🤣🤣🤣🤣☠️☠️☠️☠️
@osorioarevir5742 Жыл бұрын
Just put the new one over the old one fits like a glove
@moopelbay5631 Жыл бұрын
You can just put the red badge over the existing one.
@raulalmanzar52682 жыл бұрын
But, can't that emblem mess with the airbag ???
@silviocs2 жыл бұрын
Esse bagulho tá mais seguro que dinheiro em banco.
@bsnsjbshsjs52422 жыл бұрын
I remove mine without disabling any fuse or battery does my airbag still work?
@CChris4Real2 жыл бұрын
Share the amazon link to buy the emblem
@davidgarcia60952 жыл бұрын
Heat gun is easier
@Nohkral2 жыл бұрын
Is it still sticking?
@AlbertDM2 жыл бұрын
"Don't push it in hard yet." That's what she said. *ba-dum-tshh!*
@WeeSmokey2 жыл бұрын
This is how it's done professionally top notch buddy great finish pal ;)
@nasseranise1022 жыл бұрын
Its metal? So what if your airbag deploys? Just metal flying into the face? Im good bro, i hope they have a plastic or rubber one, like the stock.
@MrRahimhosein3 жыл бұрын
You realize that the adhesive was designed to stick to the old emblem. By removing it you reduced the surface area of the adhesive. So basically this was a bad tutorial. You just need adhesion promoter and it will never come off.
@poptart55343 жыл бұрын
congratulations you now have an emblem that stick out from ur steering wheel lol u dunce
@MrRahimhosein3 жыл бұрын
You think the latex rubber gloves will save you from the razor blade? You must be more foolish than this video
@aroojlado87143 жыл бұрын
Lyze video
@ashleighshotkoski86353 жыл бұрын
It also said J’s racing from Japan but it was cheaply made and like I said came cracked and broke as soon as out of the package. Thank you again for any help!!
@ashleighshotkoski86353 жыл бұрын
What emblem did you get? Because I got one off eBay and it cam broke but the back was not black it was silver.. I heard the one I got was a fake and so I am hoping you can help. Please thank you!!
@COMIAAMAEDOSBOCCAFdp3 жыл бұрын
Ficou uma merda
@jasonl64863 жыл бұрын
Would that emblem fly off in case airbag deploys?
@guardian83192 жыл бұрын
Probably hit you right in the face tbh
@pmatrisotto Жыл бұрын
probably...that's a safety concern for sure
@GhxstMode3 жыл бұрын
Where can I buy a legit Js racing steering wheel emblem? I did this today with one I got from eBay and it didn’t fit.
@cedenoanthony453 жыл бұрын
horrible outro
@ankithmistry3 жыл бұрын
Do you know why honda moulded logo into Horn pad ? Because it cant fly on your face and blind you when you face accident and airbag deploys ! Ricer 😂😂
@jonathanrestrepo48833 жыл бұрын
Does it stick well to it ?
@stathispapadopoulos90533 жыл бұрын
And now do you think that it is more pretty??? Does not match any other color on the dashboard. The only happy is the Seller of this.
@jptrainor3 жыл бұрын
I used a scrap of black vinyl wrap to cover the worn Honda emblem on my steering wheel. It's holding up fine after a few years and looks good.
@MrJONKS3 жыл бұрын
OMG what an idiot did that. How could you destroy stering wheel like you did, there is one golden rule, do not use any metal tools to dissassemble anything in interior or painted elementals. Try to give a good advise, you should heat things up before trying to remove the badge, use plastic tools and so on. Terrible tutorial
@joeblow99193 жыл бұрын
This should not have happened in the first place if Honda was still putting quality ahead of the profit margin...If a company doesn't even care enough to make their emblem from quality material what does this more than likely say for the rest of the car. Personally anything made of rubber on my 8th gen has gone bad including window seals, o-rings, roof channels not to mention all the screws are rusting as well as exterior body panels. Shame on you Honda
@thomasmatarazzo1983 жыл бұрын
Wish Honda could make paint stick that well
@SevagOknayan3 жыл бұрын
The crows feet on my hood agree with you
@ivanmakarov63153 жыл бұрын
😂There paint just flies of from little rocks
@outofmind92222 жыл бұрын
No shit especially CBP clear coat for gods sake paint the car to last
@saucysuishi3412 жыл бұрын
@@SevagOknayan I just took my hood of sanded with wet 400 and wet 600 and with on can of rustoleum high gloss top clear and can looks sexy again. Shop wanted 600. Didn’t need new paint. Mine looked very bad. Also wrap you clear coat can with packing tape around the seem of the can and the cap. So that clear doesn’t build up and drips on the paint like my last coat.🤦♂️🤦♂️🤦♂️
@adammalvern86953 жыл бұрын
you didn't need to undo the fuse, just undo one of the terminals on the battery. then you dont worry about the airbag accidentally going off :)
@duketogo666 Жыл бұрын
You should wait 30 minutes after disconnecting power to let the airbag capacitors or what not discharge.
@Zomby Жыл бұрын
@@duketogo666 just press in the brake a couple times on any vehicle that has some sort of electronic feature. Will kill the rest of the power
@lescap12093 жыл бұрын
I'd rather paint the real shit after getting it off as opposed to putting that fake thing that will eventually fall off. Good job though.
@mambohdm2131 Жыл бұрын
you can’t really put it back though since the clips are cut off
@shadowedanjel559 Жыл бұрын
@@mambohdm2131 just pull the horn cover off and press the clips from the back side, like you would the front grill emblem.
@accordlegend29253 жыл бұрын
What about honda accord 2008?
@derrickjames54033 жыл бұрын
Why the fuck wouldn’t you say the tool that you used
@juniorlima71723 жыл бұрын
Detonou as bordas!
@112188Francisco3 жыл бұрын
The chrome started peeling off mine (original one)
@accordlegend29253 жыл бұрын
Same and did you remove it?
@wooferjr1694 жыл бұрын
You have to take apart the steering wheel, then disconnect the airbags, then you simply just push out the old badge and replace it.
@hawkmoe27894 жыл бұрын
when your air bag deploys, that thing is going right into your face/eye. good luck.
@HarjeetSingh-wp1up4 жыл бұрын
😂😂😂 u are right
@alexgannon41394 жыл бұрын
The whole steering wheel cover flips up when the airbag goes off so that won't a problem
@hellocrzz58543 жыл бұрын
im trying to put mine on rn is my airbag actually gonna deploy in my face?
@jesusantoniorodriguez1933 жыл бұрын
Yes , after that he’s nickname will be mister H lol !!!
@rogerpritchard3 жыл бұрын
The airbag will not go off as the airbag sensor is in the engine bay.
@primalphatman4 жыл бұрын
thank you for this. I was curious if I could do a sticky one or if I could just pop the old one off. Now to decide which I want to do