I get some of the worst ripping/splintering from white oak.
@sparkyc10024 күн бұрын
Wtf is this 💩🤣
@Dr.Gunsmith5 күн бұрын
Where is the installing part 😂
@ephemeral9511 күн бұрын
Thank youuuuu!!!
@SarahSmith-nr2wj17 күн бұрын
None of my valves are blue
@UtechUreview17 күн бұрын
@@SarahSmith-nr2wj Hi Sarah, Not sure your model of boiler or if your valves are black. However, If the valves on your combi boiler are black instead of blue, the process to pressurize the system is generally the same. Here’s what you can do: 1. **Locate the Black Valves**: Identify the black valves on your filling loop. They should be similar in function to the blue ones, allowing you to add water to the system. 2. **Open the Valves**: Turn the black valves on the filling loop. You should hear water flowing into the system. Keep an eye on the pressure gauge as you do this. 3. **Monitor the Pressure**: Watch the pressure gauge closely. You want to bring the pressure up to around 1.5 bar. 4. **Close the Valves**: Once you reach the desired pressure, close both black valves securely to stop the water flow. 5. **Check for Leaks**: After adjusting the pressure, inspect the area for any leaks around the valves. 6. **Bleed Radiators if Necessary**: If the pressure drops again, consider bleeding your radiators to release any trapped air. If you're still having trouble or if the pressure keeps dropping, it might be best to consult a professional for assistance. Hope this helps. Don’t forget to subscribe, like and share. Helps channel grow.
@SarahSmith-nr2wj17 күн бұрын
@UtechUreview I worked it out, by location of the valves, but the guy obviously put the wrong colour valves on. Its a C 30. Cheers
@UtechUreview18 күн бұрын
I’m here on shorts!!!
@LyraNeoncastle21 күн бұрын
Thanks, really helpful 🎉
@UtechUreview20 күн бұрын
@@LyraNeoncastle appreciate the feedback Lyra and glad I was able to be of some help. Don’t forget to subscribe, like and share. Helps channel grow. Have a fab weekend
@Davenufc23 күн бұрын
Nice vid helped me big time
@UtechUreview23 күн бұрын
@@DavenufcThanks for the feedback Davidhoggy66 and glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@kellysullivan199923 күн бұрын
Omg I kept closing it and eventually it totally deleted me as a user TWICE
@UtechUreview20 күн бұрын
@@kellysullivan1999 Hi Kelly, are you still experiencing this issue? What specifically did you close?
@williamparrish907325 күн бұрын
Hi I have a charge 3 and no sounds come out of it, not even the sound when it powers on. I’ve tried resetting it, demo mode, and locking and unlocking it. It connects to Bluetooth fine, connects to the app fine, updated the firmware fine, but no noise at all. Any suggestions?
@albertobrien66326 күн бұрын
If ya dident know that.stick with ur pencil.ffs
@marty367426 күн бұрын
Thank you
@wolfiesmith767427 күн бұрын
What ?
@johnluckcock364128 күн бұрын
Can/should you remove the can when gas is still in there ,
@rachelobaseki447729 күн бұрын
Thank you so so much. The one time I needed KZbin to come to my rescue and your video did. Straight to the point and no faffing around. God bless you.
@GUNNAHZ70Ай бұрын
Really???? Ffs 😂😂😂😂
@Private-Ryan__16Ай бұрын
Pull the release leaver
@tbonelfc9668Ай бұрын
I've been calling them mole grips for the past 20 years 😮
@mathewbriggs6667Ай бұрын
Abused many stud finders and never have I ever had a stud finder actually work everybody should just use a magnet
@UtechUreviewАй бұрын
@@mathewbriggs6667 hi mathewbriggs6667. The Franklin’s sensor pro is best at or detects wooden stud locations and the Bosch multi level surface detector detects dense material, live cables , metal pipes e.t.c . They are very viable and feasible. Understood if you use high impacting magnets that indicates the presence of a metal fastener which indicates there is a stud behind part of the wall and where you can the measure 16 inches from that point in either direction to find the edges of a stud which is a pro. The con is, one who is using tribal knowledge or inexperienced may misconstrue a metal pipe or metal strike plate covering electrical cables as a stud location behind the part of the wall and with a wrong drill set being selected I.e cobalt or masonry or dedicated drill bit set, during drilling the operator may strike a metal water pipe or live cable buried through the plate. Nevertheless, Appreciate and thanks for the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@elizabethlumu8027Ай бұрын
Thank you very much
@UtechUreviewАй бұрын
Appreciate the feedback and glad was of help. Dont forget to subscribe, like and share. Helps channel grow
@elizabethlumu8027Ай бұрын
The best video
@UtechUreviewАй бұрын
Thank you. Appreciate the feedback
@nafisaramzan6162Ай бұрын
What happens if the needle didn’t move and then you turned the valves back and it is now on 3, slightly over 3? Help?
@motherslove7246Ай бұрын
Hi, what should be the recommended level of the gauge is it 1, 2, or 3. Thanks
@UtechUreviewАй бұрын
@@motherslove7246 Hi Motherslove7246, 1.5 or as stipulated in your manual. Don’t forget to subscribe, like and share. Helps channel grow. Have a blessed week
@1mistaGROOVEАй бұрын
Very good instructions. Thank you. God Bless
@UtechUreviewАй бұрын
Appreciate the feedback 1mistaGROOVE and glad it was of help. Don't forget to subscribe, like and share. Helps channel grow. Have a great week
@terrylina.8366Ай бұрын
thank you so much! This worked
@J4_Vibezz2 ай бұрын
How can you do on Android?
@MeMyselfAfrobeats2 ай бұрын
God bless
@marychampion34922 ай бұрын
Thank you so much! I needed to know if the pool walls would just rise on their own before I added water. You are the only one able to answer my question!😊
@Djidroneswe2 ай бұрын
I have factory reset my charge 5 but it still doesnt connect to my phone but it connetcs to other devices but not my phone
@vovkavavan3802 ай бұрын
Could you please tell me how to reset the maximum and minimum readings in the "memory" column of this thermometer?
@UtechUreview2 ай бұрын
Hi vovkavavan380, To reset the maximum reading on the TP-55 thermometer, you typically need to press and hold the power or mode button (all time reading or 24 hr button for 3secs) as exemplified in the video. Try pressing and holding either of these buttons for a few seconds to see if it resets the maximum reading. If that doesn't work, refer to the user manual for specific instructions on resetting the maximum reading on the TP-55 thermometer. Don’t forget to subscribe like and share, helps channel grow.
@AnotherEarthling_2 ай бұрын
I have a 12x30 inflatable pool how long should it take to fill?
@markk31402 ай бұрын
Any link to get if it does thanks
@markk31402 ай бұрын
Hi will this work on my samsung tv. Mod num UE37D5000PW thanks
@UtechUreview2 ай бұрын
Hi Markk3140, you are better off liaising with Samsung customer service or your local retailer. As you TV is an old model and doesnt incorporate Wi-fi, You can purchase from third party vendors who sell this added user functionality if samsung stores have run given they may have phased out TV's without inbuilt wifi capability. Hope this helps. Dont forget to subscribe, like and share. Helps channel grow
@StevenRiach-kj7ny2 ай бұрын
Very good instructions had no problem at all in getting my disco with this man show me the way...😊
@khanwalkarnitin2 ай бұрын
Thanks this solved my problem
@user-wf5ih3pc6f2 ай бұрын
I don't have boost switch.... Do they boost automatically when showering?
@Sovative2 ай бұрын
straight to the point, thanks!
@RatchelDelicano3 ай бұрын
Panoooo
@johnridout81213 ай бұрын
this simple fix saved me £320 in boiler repair costs thankyou so much john
@UtechUreview3 ай бұрын
Appreciate the feedback Johnridout8121. Glad your sorted and was able to be of some help. Don’t forget to subscribe, like and share. Helps channel grow. Have a great week
@JohnnyChinch3 ай бұрын
THANK YOU!!! I was ready to smash my computer LOL
@UtechUreview3 ай бұрын
Appreciate the feedback JohnnyChinch. Glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow.
@mborsic943 ай бұрын
have you perhaps tried to find a live wire between two reinforcement nets in the concrete? I have a specific scenario where the drywall will be installed on the ceiling but the wires are in the concrete plate made with two rows of reinforcement metal nets. Between them, there is a plastic canal where the wires go trough. To avoid drilling holes for the drywall trough those plastic canals, it would be of much help if some detector can see wires trough concrete and behind metal reinforcement net. Do you know if this or some other detector is capable of doing that?
@raejenson1863 ай бұрын
Thank you for making this. My partner just bought one and couldn't work out how to fit the blade it was driving him nuts! I thankfully found your video and goit it working for him.
@UtechUreview3 ай бұрын
Appreciate the feedback raejenson186. Glad your partner is sorted and made up for yous two. Don’t forget to subscribe, like and share. Helps channel grow
@MuhammedMustafa-fz1xe3 ай бұрын
Hat funktioniert ich Kuss doch dein herz
@UtechUreview3 ай бұрын
Schätzen Sie das Feedback, MuhammedMustafa. Ich bin froh, dass Sie sortiert sind. Vergessen Sie nicht, sich zu abonnieren, zu liken und zu teilen. hilft dem Kanal, zu wachsen
@codreanueduard39533 ай бұрын
I’m at the job right now. Pressure is very low 0,4bar and doesn’t go up. F1 still on display. Reset doesn’t work and switching off and back on completely from fuse switch still doesn’t work. Boiler doesn’t restart at all. I have to use my manual pomp to pressurize the boiler
@stanislavmusin88793 ай бұрын
Thank you 🙏 works for me 100%
@lutfidzolmi4 ай бұрын
nice, straight to the point! thanks mate
@UtechUreview3 ай бұрын
Appreciate the feedback lutfidzolmi . Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@andrewpaullavender57014 ай бұрын
thanks sorted me out
@db3024 ай бұрын
The best mit-out-sound video ,with detailed explanations I have ever found. Thanks for the effort put on this.
@UtechUreview4 ай бұрын
Appreciate the feedback db302, glad you are sorted. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend