Brilliant

Where do you buy your cedar from please

Is it cheaper to make your own boxes with cedar?

The silver plates with holes and slots have 2 notches (inner diameter) in the 12 and 6 o’clock positions. The blue plates also have 2 notches on outer diameter. In your 3d image the blue plates seem to be in the 1 and 7 o’clock positions, relative to the silver plates that are in 12 and 6 positions. Is this how it came apart? Or does it matter? When I took mine apart, the blue plate notches seemed all in the direction. The silver plates were random.

18 dec 2023 5:32 am est ( utc - 5 ) : thanks . just-now i finished fast-foward-and-rewind-to-partially-see this movie . so freelander year 2007 is awd-full-time ? not awd-during-front-tire-slippage-only because 1:50 show 2 viscous-coupling with same-distance-to-each-other all-time to create awd-mode ? those 2 viscous-coupling never far-away-from-each-other to turn-off awd ?

👍👍👍👏

This makes things so clear. I was thinking that propshaft would have to come out at the transfer box but this is much better and the CV joint can have a service too. Thank you

The year was 2007.

Thanks for sharing, What year is this freelander?

I am sure you can still buy handbook with all info you need on Woodprix. Just google it.

Impressed , :) good animation ,

Hi Paul, you know you can buy stacked dado cutters on eBay uk , I bought a new set last year for £80 , I also use them on my moulder , it might help you. Many thanks and a great video etc Cheers Curt

Hi Paul. Do you have any drawings for the jigs used? I would be keen to see a second video of the handles being sawn.

when will you post the rest of the videos please to make the rest? Really good video so far :)

The jigs I use will only fit my saw. I would need to know your saw slot size. blade thickness blade from the slot, slot depth. then I could draw them for you. OK

Do you have plans for your jigs? If so, is there any chance of you posting them?

It don't mater if you wobble a bit it will make it easy to get it back in the right place.

Where did you buy the silicon to re fill

Sorry for the weight, problem with my crap saw.

Great video, when are you showing the rest please?

Very impressive ! It looks as thought many hours went into this!! Do you post in any freelander forums? I tend to hang out in landyzone in the freelander area.

I open it on a lathe, I also opened the wrong end. If I had to do it again I would just drill a hole try to get the silicon out with white sprit and refill. Sorry I never made a video.

please how do you open the carcase of VCU ? have any video?