Direct. With some pointers included. I like this content sir!
@privatename3621 Жыл бұрын
Love this video, and reference it every time I change my daughter's oil in her 2013 Camry. But I will say, I use the access drain and the the plastic drain "straw" that comes with every Toyota oil filter made for this car every time. It prevents the huge oil flood from dumping out everywhere as we see at 2:56. When you drain the oil first the way it was designed, that doesn't happen. It all goes out the plastic straw drain fitting right into the pan with no mess. Then unscrewing the oil cover makes no mess. Watch the first 1 minute of this video to see how it is use: kzbin.info/www/bejne/pHOlm6JtZtBlaNU
@joefruitloop6614 Жыл бұрын
Very good video! I had a good laugh at “put your funnel in the most inconvenient place in the entire world.” 😂
@stevenm322 Жыл бұрын
Use the correct weight but get high mileage formulas. Don't play fake engineer.
@Yobbo_91gt Жыл бұрын
Thank you! An actual realistic video of these sum betches being removed. Your video was very helpful!
@forexsanjose6090 Жыл бұрын
I used Fram ultra filters as well. Personally prefer punching through the filter with a screw driver to remove the filter. No need to take the wheel off. Just turn the wheels to the far right is enough to reach the filter.
@curtismccombs22122 жыл бұрын
I am 37 seconds in and wondering why there is a metal putty knife being used on such a clean car. 🥲
@fernandobautista65862 жыл бұрын
Thanks for the awesome video!
@torrro85292 жыл бұрын
😁 👍
@timhall31592 жыл бұрын
nice job - your one of the best mechs I have seen on You Tube
@arturopruiz2 жыл бұрын
Are all the moldings just holding on with 3M doble tape or some have also screws?
@brandonknight72402 жыл бұрын
My 88 is being painted black as well and i have the same wheels but mine is a hatchback. Ive always liked the hatchback better than the coupe
@brandonknight72402 жыл бұрын
I hope the aim wasn't just to leave it that way like a moulding delete kinda thing because that would look terrible where the channel meets both bumper covers
@cadillacsmoke73513 жыл бұрын
nice..omw to do my own oil change
@danielstover30293 жыл бұрын
Very nice vid! Straight to the point and purpose. Good info... Thanks!
@dee10623 жыл бұрын
Excellent video. I'm changing my own oil for the 1st time. Looks very simple
@leonardo-se3uk3 жыл бұрын
No entiendo si estoy pidiendo espesificamente como cambiar el aceite de honda odisse 1.999
@scottg4293 жыл бұрын
Can anyone vouch for what he says about the oil? I can’t find any record of the service bulletin he’s talking about
@rodneysmith2473 жыл бұрын
When have you changed the water pump and timing belt? Great video 👍
@mahrez52443 жыл бұрын
Thank you dude
@oneundecided4 жыл бұрын
Thank you for the video, may I ask you what is the oil change interval on 2.5 liter Toyota engine? I was told by the Toyota sales agent that it is six month or 8000 km, but the internet suggests 10000 miles or one year for the synthetic oil 0W-20. Both 0w-20 - and 5w-20- are IDENTICAL once the car is up to temperature. The difference is how thin those oils are when the car is cold. Neither the or the flow enough in the cold to properly lubricate your engine. However, the 0w-20 is thinner and does LESS damage at start up than the oil. Also how do you recycle used oil?
@1COOL194 жыл бұрын
Mpg?
@BackTrackBug4 жыл бұрын
99-05 should use 5w-20. 0w-20 is okay too. Never anything else! 10w-30 is way too thick at start up for the 3.5, especially in cold weather! Bad bad bad....
@devongronerphotography4 жыл бұрын
Finally someone says it! Listen, this is an excellent video. Great job on all accounts. My only is is, as a former professional technician of 9 years I can tell you NEVER put ANYTHING other than the recommended viscosity in any engine, especially a 5w20 and NEVER overfill your system. 5 quarts in a 4.6... Especially with higher miles and the wrong viscosity... Well that's why you're leaking. To much pressure blowing the gaskets causing leaks. Again. Excellent video. Really well done. Not trying to be a jerk. It's your car. But don't tell others it's ok to use the wrong amount and the wrong type. Any spec can be found on Google instantly including proper torque pressure for your drain plug with a torque bar, which can prevent striping the drain pan threads. Overall excellent work my friend and sorry you had poor service by past techs. Cleanliness is always a basic service.
@florimshala14 жыл бұрын
How about a metal string 😂
@brandonknight72402 жыл бұрын
Guitar string would eat up the paint
@njsongwriter4 жыл бұрын
You made it look like it was difficult to remove that o-ring even with a screwdriver.. Try this... kzbin.info/www/bejne/l2GnkKl9e8x_epo
@paulmagson4 жыл бұрын
What about 5w 30 oil is that okay.
@edidiongekpo4 жыл бұрын
Thank you. This was a very educating and interesting video!
@aaronwilson55084 жыл бұрын
Heat gun and dental floss. Then goo gone or denatured alcohol to clean the adhesive. Then wash. Then rubbing compound and wax. Wouldve been 10 times easier and probably saved you some rubbing compound work if you hadnt used metal tools on it.
@newwavepressure64784 жыл бұрын
How many miles does the trip meter go off on 3 or 5 thousand or jus when the oils feels bad??????
@missadda88904 жыл бұрын
4500 miles from last reset maint reqd light flashes at startup
@alejandrorocha96324 жыл бұрын
Great video, much appreciated
@bowlweevil41614 жыл бұрын
i bought new filter and it came with big and little o ring and a round plastic thing with threads on one end, i did not see little o ring or plastic thing in your video, and i could not find a place for plastic thing so i didn't put it in, your video is incomplete
@simplyservice85434 жыл бұрын
When removing the filter cup, I had better luck using a large socket that fit the hut on the oil filter tool. My filter was on o tight that 3/8' extension and ratchet didn't have the oomph.
@njsongwriter4 жыл бұрын
So you're concerned with not breaking the oil filter cap but you don't seem worried about damaging the threads with a screwdriver to remove the o-ring. Read the instructions with the oil filter about removing o-rings. There is no advantage to using 5W-20 over 0W-20.
@nhattuygiaithiensaunguyen98854 жыл бұрын
Thank you
@gardenia17384 жыл бұрын
Nice video thanks, But 1 tip here as long as you have a vertical oil filter, fill the filter with new oil before your screw it on the engine, will prevent the dry first crank.
@stevensevek61514 жыл бұрын
I know the oil filter cap wrench for the 2.5 liter engine is the same for all Toyota's from 2.0 liters or larger...
@dannykalpakchi20164 жыл бұрын
Hello, wondering where you got the tool to remove the oil filter from?
@stevensevek61514 жыл бұрын
This is where I got mine from... www.amazon.com/dp/B00XTAGHU0/ref=psdc_15708821_t1_B00Y5JWW1W
@gonadiator4 жыл бұрын
This vehicle takes 4.6 quarts, not 5. This is why your dipstick at 5:27 shows an "over" reading. Please be careful people.
@ronniecarter31234 жыл бұрын
I put five quarts today in mine and it's exactly at the full mark. Your mileage may vary, evidently.
@stevensevek61514 жыл бұрын
Better to be a little under full than overfull.
@kevinshuman73425 жыл бұрын
Good video
@pagosplace30655 жыл бұрын
Just out of curiosity, has anyone ever used Goo Gone to get rid of the excess tape?
@cesarb.85225 жыл бұрын
How severely does the 0W-20 oil affect the longevity of the engine ?
@gonadiator4 жыл бұрын
It doesn't. 0w-20 by definition is better oil. The reason is because it heats up to and holds a more stable temperature than weighted oil. Do your own research. This guy also says to use 5 quarts when this car only takes 4.6. Would not take any of the advice in this video.
@eddielozada36945 жыл бұрын
Good video. Good audio. Thanks for the help.
@Machi740055 жыл бұрын
My manual on my 2013 says that you may use 5w20 once but the next oil change MUST be 0w20. In other words the factory acts like 5w20 may hurt the motor over the long haul.
@anonymousinc63305 жыл бұрын
Very straightforward and informative. Just bought a '15 LE and I cannot believe Toyota was stupid enough to use a cartridge-style filter in this day and age. If anyone is interested, Baxter Performance in Washington state sells a spin-on filter conversion kit.
@didierestrada5755 жыл бұрын
Sorry for the name of the liquid to clean the engine
@bradrichards61073 жыл бұрын
Brake Kleen by CRC. Any brand brake cleaner would work. You could use carb cleaner as well. It’s just a solvent.
@briankeefe4585 жыл бұрын
You should have included changing the drain plug crush washer.
@HandyHudsonite5 жыл бұрын
I agree.
@kate10115 жыл бұрын
Help! I Just took my 2012 camry to a "non toyoto mechanic" for an oil change. The mechanic broke the plastic filter housing and had to replace it, said the tabs broke. Was told it was replaced with a metal housing. What should I do?
@eddielozada36945 жыл бұрын
The threads are thin. If both parts are made of metal you can damage both parts. I suggest you stay with the plastic and handle it carefully. If you cross thread it or break it, it is better to replace the filter housing that have to replace the crankcase.
@invent55405 жыл бұрын
Ten dis-likes out of 300... what possibly could you possibly find wrong with this video. 1/30th of humanity are A-holes I guess? Great video btw... concise, well narrated, good lighting!
@mikexcanxjerk5 жыл бұрын
which would be best , my 13" hit 100k miles but still deciding on which oil brand to go with Penzoil , Mobil 1 or Castrol ? Which do you think is better overall ? They have different additives
@projectnerdvana28205 жыл бұрын
Pennzoil baby! Trust me. Have to get the full synthetic high milage one tho. Trust me you'll feel the difference after the change and starting the engine.
@mikexcanxjerk5 жыл бұрын
Project Nerdvana I did Castrol , next oil changed I’ll try Penzoil , is it really that much better
@stevensevek61514 жыл бұрын
Make no noticable difference.
@ronniecarter31234 жыл бұрын
@@mikexcanxjerk I've used Castrol full synthetic for many years, get it at Walmart, 5 quarts for around $22, never ever any problems whatsoever and my 4Runner is close to 450,000 miles now (I bought it new in '96).
@mikexcanxjerk4 жыл бұрын
Swann System I went ahead and tried ultra platinum Pennzoil. My go to now . You should try it one time . It makes your engine run super smoooth for a while then goes back to normal but I know it did its job. I use Lucas fuel injector cleaner fill my tank up before near empty I change my engine oil. I do this way because oil and gas mixed with the Pistons so I want to get a deep clean as much as possible
@JeysonElRussian5 жыл бұрын
So if has 163.xxx can use the same oil that you use?