Tweezers to drop the spark plugs down the hole? Did you lose the rubber insert that holds the the plug in the socket? That's a good way to change the plug gap by a random measurement.
@iamgeorge1146Ай бұрын
@@73SDR Yes, I do think I lost the rubber insert. But I used the tweezers to slowly place the spark plug at the bottom of chamber. In my honest opinion it is not like I was dropping them from the top of the cylinder head.
@emabit28182 ай бұрын
Hi George just wondering if the window regulator is still holding up okay? Thinking about welding it myself soon
@wajidrashid85173 ай бұрын
Was your motor ok ? As mine isn't moving up or down
@wajidrashid85173 ай бұрын
Hi George what a amazing repair. Today my c124 mercedes front window went down but did not go back up. I swapped the switches around and it didn't work. Then I took door panal off and gave motor live and earth but it didn't go up or down. Do you think I need a new motor ? Or a regulator to? Thanks George your advice is appreciated 👍🏻
@iamgeorge11463 ай бұрын
Thank you for the kind words! I would assume the motor is broken as I did gave mine live off the car and it worked.
@wajidrashid85173 ай бұрын
@@iamgeorge1146 thanks for the reply George, did you give your motor live when it was in the car in the door? Or should I remove motor and regulator then check if motor is broken? Where can I buy the motor? Eurocarparts ? Thanks George Ps yours is the only video on whole of Internet for c124
@iamgeorge11463 ай бұрын
@@wajidrashid8517 In my situation, before taking anything off, I could hear the motor working, and grind noise without the window moving. That meant that the motor was working just the teeth were used.
@wajidrashid85173 ай бұрын
Thank you George, yes i tried live direct to motor but nothing, no noisr no sound no movement, tomorrow i will raje out regulator and buy new motor and fit back .@@iamgeorge1146
@MopeliLetsie3 ай бұрын
Which country are u based ?
@robyd75814 ай бұрын
hi, incredible repair. But can you explain how to register the glass to close perfect like your?
@iamgeorge11464 ай бұрын
Thank you Roby! To be honest, I do not remember. Trial and error for 1 hour. Put a battery charger on the car and a lot of moving the window up down. Also compared the possition to the other side door.
@domantir4 ай бұрын
Thank you
@annaj18146 ай бұрын
Hi, Great video. I can’t find connection order from sparks to distribution cup (other end). Could you please make a video or add picture how is connected?
@fabri29036 ай бұрын
grazie
@engenhariamecanica13197 ай бұрын
Hi My name is Alex and I have the same issue, have you sorted out the leak? Can you please send me the link or the part that you bought name or code? I can't find it. Thanks
@hastomotobing765410 ай бұрын
George, can i get the manual book of this engine?
@rahsiadiri551010 ай бұрын
Thanks George!
@user-uw9pl7gi4y Жыл бұрын
I have the same engine on a w202 But It doesn't have a MAF sensor Now I have bad acceleration, rough idle and sometimes it revs by itself Any suggestions?
@iamgeorge1146 Жыл бұрын
I wish I could bring some wise words but still working on the rust. Sounds like a throttle or vacuum leak to me. Check all ingnition bits, injectors and oxigen sensor.
@user-uw9pl7gi4y Жыл бұрын
@@iamgeorge1146 Thank you for responding You gave me a great point where I could restart my search I appreciate your help
@Mvri06 Жыл бұрын
Hallo, Ich habe einen w124 e220 ( Benzin) 300.000 KM. Kannst du mir bitte sagen, welches motoröl für meints passt? Vielen Dank!😘
@iamgeorge1146 Жыл бұрын
Hallo, Ich werde morgen nachsehen, da ich noch auf der Arbeit bin. Vielen Dank, George 😁
@Mvri06 Жыл бұрын
@@iamgeorge1146 okay , danke schön
@iamgeorge1146 Жыл бұрын
Hallo, Mein Shop empfiehlt 10W40 oder 15W40 Castrol. Das habe ich verwendet und der Motor läuft bei 113.000 Meilen perfekt. Wenn Sie das Fahrzeugbuch haben, können Sie dort nachsehen, aber ich habe meins verloren.
@louietownsend8619 Жыл бұрын
Promo`SM
@ramezsamir7811 Жыл бұрын
Need the part number for these spark plugs plz
@iamgeorge1146 Жыл бұрын
Hello friend! I believe I installed the first option. BOSCH F8DC0 BERU 14F-8DUO CHAMPION C10YCC Kind regards, George
@ThePitpas Жыл бұрын
Good job! What is the website you order from?
@iamgeorge1146 Жыл бұрын
Thank you! I got it from ebay. Just search for: W124 Coupe & Convertible Sealing Side Window/Door Right NEW
@agutek Жыл бұрын
I'm glad you are not giving up on this, please keep it going, great work so far.
@iamgeorge1146 Жыл бұрын
Thank you friend 😁
@tauraimuchini5309 Жыл бұрын
Did that solve the water problem
@ysfgncy Жыл бұрын
Does anyone know that w124 coupe has window dropping?
@iamgeorge1146 Жыл бұрын
I have checked my W124 and the window dose not drop when opening the door. It must have a different design that I am not aware of, some say it os the way they designed the seal around the body where the door closes. The CLS windows do drop when opening the door and they have a sensor, switch for that.
@lakinmors2724 Жыл бұрын
Hi why did you go in with 2nd wrench after torque wrench? Thanks
@iamgeorge1146 Жыл бұрын
Hi! I remember reading something about using a certain torque and then you have to tighten a few more degrees. Probably unnecessary but that was the information at the time.
@terran5569 Жыл бұрын
Been there, done that.
@user-nq4un5bn3y Жыл бұрын
How many liters of oil with filter the engine 2.0TDI
@talharehman8369 Жыл бұрын
where does the upper oxygen sensor plug into, Mines disconnected and i cant seem to find where it connects?
@Security2U2 жыл бұрын
Hello curious to know have you replaced the wiring harness in this model
@amateurcarprojects372 жыл бұрын
George I’m breaking my W124. Do you need parts? I’m in Milton Keynes
@Beechams10422 жыл бұрын
Hi there The passenger side window on my c124 has stopped working - so I will need to look at he regulator and the motor. Before I do, what do the rivets do? What do they hold in place? And are they essential?
@iamgeorge11462 жыл бұрын
Hello and wellcome 😁 from what I remember they hold the window regulator assembly fixed to the door skin.
@Beechams10422 жыл бұрын
@@iamgeorge1146 Would screws or bolts work to refit it? Or will it have to be rivetted back in? Thanks for the video btw!
@wajidrashid85173 ай бұрын
Hi Beechams the exact thing happened to me today, I put my passenger window down and it didn't go back up. I then shaped switches around and no luck. I have took off door card and there is a black and green wire going to the motor and I have fed those wires with live and neutral direct. but window don't go up or down . I'm a bit stressed and it's made my anxiety go through the roof 🙈
@bennett49492 жыл бұрын
Great repair! And better then buying a new or a used one!
@waltpartymiller68022 жыл бұрын
When attempting to remove any connecting rubber hose from a fitting- heating it with a heat gun will make the job much easier (wear protective gloves).
@yanishblackstar19522 жыл бұрын
Hello can you provide me the firing order please
@faridfarid75172 жыл бұрын
The screw for that you have asked is one of 2 screws for adjusting the low stop (how deep will the window go down)
@Valdemar12 жыл бұрын
Same problem here
@SuomenMato2 жыл бұрын
Thanks for the vid, each day I grow to hate my mercedes more and more
@iamgeorge11462 жыл бұрын
You have a never-ending project ? 🤣
@MmNn-mp3lh2 жыл бұрын
I think the that m104 not 111
@iamgeorge11462 жыл бұрын
What makes you think that? I am sure this is the m111
@nikolauskim2 жыл бұрын
great video. Wondering where is M111.960 ignition coil? so interesting!
@alexismontealegre18452 жыл бұрын
Could that cause erratic misfire? Sorry i have no fuel pressure tester i cant read my fuel flow
@iamgeorge11462 жыл бұрын
Injector seat was cleaned with "Diesel injector seat cutter kit" only light use and think I used the flat head from the kit. Got the rest out with a vacuum.
@jeff6122 жыл бұрын
Hello George how did you clean each of the spark plug housing? Thanks you so much
@iamgeorge11462 жыл бұрын
Hi Jeff I used a diesel injector seat cutter kit and a vacuum. All the best!
@jeff6122 жыл бұрын
@@iamgeorge1146 Thanks you so much george
@jeff6122 жыл бұрын
Thank you for your videos, I have Mercedes 220e 1993 engine 111960 with alarm with 80000km that slept for 12 years in a garage. I just turned it back on but I can't hear the noise of the fuel pump. Is that the noise I hear in your video? I'm lost. I'm going to change the spark plugs too. When I deactivate the alarm the fuel gauge does not work and I activate the alarm it works. I believe there is a circuit cut on these cars connected to the alarm with fuel pump and gauge pump. Thanks for your answers ☺️🙏
@kenweeks80393 жыл бұрын
Hi, Many thanks for your quick reply! Ok, all noted, will try to follow your suggested action and try again, regards, Ken.
@kenweeks80393 жыл бұрын
Hi, do you know if the Launch CRP 429C is capable of ABS bleeding on a 2011 Renault Megane 3 (European model)? I followed the instructions on my CRP 429C but it kept saying 'vehicle not equipped' (or similar wording). Or am I doing something wrong? Many thanks, Ken.
@HeinriksPatriks3 жыл бұрын
Nothing about how to do job!
@hifromme42363 жыл бұрын
How did you clean each of the spark plug housing (before placing the new plugs)? They became very clean.
@nokia82ful3 жыл бұрын
Very good job👍👍
@benyounesmikanik48973 жыл бұрын
Merci
@tbos.3 жыл бұрын
Very thorough, well done. Got same engine but my oil pressure never below 3 though?
@mercow12423 жыл бұрын
What model year is yours? Mine e200 94 but iam afraid of rust.
@marcink-bus22913 жыл бұрын
If you live where they salt road during winter or on island be sure your 124 is rusted :(
@normanmarozva27833 жыл бұрын
hy i have a problem on m W202 with 111 engine alluminiun manfalt
@borntolate13 жыл бұрын
I put a little grease on the olive to help it center up as you lock up the nut .