I agree on the loader. Obviously the lifting capacity is strong, but structurally I feel the design is weak. I feel they probably lightened the loader to increase lifting capacity, if that makes sense. When we are looking at specifications in a brochure, we are just comparing numbers, and numbers sell tractors. I actually recently tweaked my loader moving a downed tree on one of my trails…operator error no doubt, but in hindsight it tweaked pretty easily compared to my other tractors. Measuring pivot pins at SSQA, it was off 1.5” side to side. Quite alarming, but equally alarming was how easily I was able to tweak it back to normal. A few timbers under the low side of the bucket and some careful work with the joystick and I got back to within less than 1/8” side to side. Lesson learned, I’m going to be extremely careful with any off balance work with the loader.

Did it just fall out?

Well I dont know much about cabs and tractors, but judging by those bees I'd say if I ever get a tractor I'll be sure to get the cab package installed.

You wouldn't be stopped there making a video lol

All the hard working farmers in the world God Bless Them All Respect👍🏽👍🏽

Gonna wish it was green when you go to sell it.

That’s an interesting trailer to me. I have a farm and although I don’t make round bales, a lot of the neighboring farms do and have never seen a bale trailer like that. Here in Western PA, they jus load and unload them from the sides. Great video, keep up the good work and keep making videos on the LS.

I don’t care about the looks, I care about the quality and customer service. My experience with LS tractor has been terrible, the worst I have ever had. The loader frames are not thick and strong. The metal is weak and bent easily and it will even break in two. Parts are expensive and take to look to get. I have escalated problems that I have had to factory representatives and even had my tractor taken back to the plant in Battleboro NC and the problem where not resolved. They acted like they didn’t care and had an attitude because I wanted warranty work done. I WILL NEVER BUY OR RECOMMEND A LS TRACTOR!

Oilfilteraceesisunderpassseat

Yea that was a fail.

LS and New Holland are same tractor. Parts should plentiful. Might even be worth trying to find plexiglass

Just for your info, from what I understand,SOMETIMES if you can get a LS part number, should be available online , you can add MT in front of the part number and it will cross with a New Holland part number. Most of the time the part may be cheaper and turn around time is also quicker. Maybe this will help you out. Your repair looks great and Im glad your ok. Take care and be safe out there !!

I have done twice in rear, and once a door.

Been there done that!!!!

He should keep going and get away from those hornets

Happened to me on my 3032. I now have anxiety clearing land. I lost them after a 150 yard sprint into a corn field in south Arkansas in 103° heat. I got hit 20+ times and about passed out equally as far into the corn field. They were caught in my clothes. 0-10 should have listened to the salesman

JOHN DEERE is pricing itself into a corner and eventually OUT OF BUSINESS!!! I just bought a 2038R fully loaded and a horrible dealer experience has brought me to this conclusion... I MADE A BIG MISTAKE 🇺🇸💯

I would buy the tractor, but your shirt isn’t tucked in….

LS is definitely cheaper to buy but after 10 years of owning one, I can say the parts are expensive and poor quality. Metals that they use are weak, they bend and break easily and don’t have any spring tension strength. I use tractors with loaders for landscaping and I have broken 8 components on the LS Tractor and zero on John Deere, Kubota Massey Ferguson in 40 years of operating tractors. I’m currently waiting on a $500 part to come in that is taking 4 weeks to get and causing me downtime$ Only 630 hours on a XU5055 and I’m concerned about the amount of metal floating around in the front differential oil also. Not looking good

Extra protein in that bale

If you didn't have a cab you would be gaining lumps faster than you could rub them !!!!!

I just purchased a 2024 LS MT573 last Friday should be delivered this Friday.

Back in the 90s we would mow over the top of them in the lawn. They didnt seem to care

I just got hit while mowing

That's Texas

Fantastic video I'll be doing this in 50 hrs. Thank you for your Time.

I just purchased a 2024 LS MT573 and had a 3rd function installed for grapple bucket.

I just purchased a 2024 LS MT 573 and it's Loaded .I did and the remote for a Grapple bucket. The seat is Amazing. It won't be delivered until September 5th 😢😢😢😂😂😂 because of the remote and I wanted a Stump puller bucket also. A John Deere 5075E was 18k more and only 1 rear remote and it didn't have the 1000 pto. A New Holland Power Master 75 was $66,600 after Rebate. I got a 7ft rotary Tiller, 7ft box blade, Stump bucket, Grapple bucket and the install of front remote for the Grapple all for 65k.

It sounds to me like you need to lose a little weight to solve many of your problems. Not trying to be mean but I lost 25pds which cured a lot of flexibility in my cab.

Plus you fix that wire you gonna keep hung up on it.A lot more who wire that fence up not a good job , pretty bad.

You must never have raised goats.

That's gotta hurt. Ripping the goatee off on wire.

I was disking a field one day and I seen this floating fuzzy ball it was a swarm of bumblebees they intercepted the 7020 Alice thank God I had a cab if not I would have raised the disk and turn one way or another bumping my way up through the power shift

If i hit them with the 806, i would quickly throw her into high gear and be gone!

Will it have a five year warranty?

Thanks for the review. My MT5 73 is a 1.5 years and has 350 hrs. Here are a few more comments to add to your list for your viewers. - Top link... Yes same here. I have to figure something better than an ugly bungee cord to hold it in place. - Steering wheel whining... Noticed the same thing, It was really screaming when I lifted a 1 ton bag of fertilizer and steering was very difficult so I was avoiding steering as much as possible when loading and unloading. It would probably benefit to have a counter balance on the 3 point hitch. - The beeping noise. Like your comment on the beeping. 😊 I have to figure a way to at least lower the sound level. It's like it's screaming at you all the time. - One thing to check is the bolts that hold the loader to the chassis. Make sure they are still tight after 100 hrs. Mine were starting to get loose. Has to do with being installed after the paint and the paint wearing off. Problems so far. 1- I had the EGR changed. Fault code F08. Every time when you put the key on you will hear it clicking 3 times. Mine started acting up after 211 hrs until it completely stop. Was under warranty but still had to pay to get it replaced because the dealer needs proof that it was replaced so you can't replace on your own. I was told to try and clean it at the beginning. It was actually not that dirty at all. 2- Radio stopped working after around 30 hrs. Replaced with a named brand with my own money. 3- Power Shuttle Transmission Switch. Lately I've been getting a F02 - 1000000 error code on startup. This is the code for a malfunctioning Power Shuttle Switch (The orange paddle in cab). The neutral light in the dash would also blink twice, (not sure if that has anything to do with the problem). You will get an exclamation mark in the dashboard and an ear full constant annoying high pitch sound.🤨 The tractor will not go into gear. And of course this will usually happen when you're in a rush to go bail the hay before it rains. :) I'll check to see if I can spray electronic cleaner in there, before I get it replaced. I keep the inside of the cabin decently clean. I'm 6ft tall and I find this tractor very comfortable to drive. I enjoy many of the hydraulic features on this tractor. I can lift 1 1/4 cords pallets of fire wood easily. I have not had any issues with the DPF regeneration. It does regenerate more often during the winter as compared to the summer when the tractor works harder. To me this tractor is a real charm. Thanks again for your effort to share. Keep it up. Rich

Good advice about locating feed bales in different areas each time.

Resale value is more with the Kubota! I know Kubota is more money to start!

I bought a Kubota and have great support from my dealer! Love my MX5400!

Awesome, glad to see you got it going

Running ls

Just another gook tractor.

When are you going to do a comparison 573 vs 774? Would love to see them side by side. Thanks again for your time and making great content.

I have to agree about the manual for LS they suck and the fact that they don't even tell you what filter to use is ridiculous.

I got done mowing with my LS so I thought I’d washed it off. I gave it just a little bit of extra water to see if it can grow a cab and AC.

Must be very dry to have that much dust. Great if you've a cab with air conditioning 👍 The first tractor I drove didn't have a cab, a MF 135 👍

Shredding, at least, knocks out foliage to keep the plants from producing beans. Then can come back like you did with herbicide to control sprouts. Then grub what is left

Good luck am curious like you I don’t know that much on them but hopefully it’s a awesome cutter 😊

Very good point!

Loved mine except the seat