@@stockmarketjega4817 when doing a difficult part. Hit the arrow next to the P button and choose a program. set your KV at 100 and your micrograms at 18. This should be a good starting point. When moving to a second coat, choose a different program set the KV to 100 and the micro amps to 3.5 let me know how it goes

@@lyasdjehiche6812 first coat second or third coat?

@@jamieargyelan292 first and second

@@NoLimitS17 on page 45 and 46 in the manual is the best place to go to learn how to set zero. all manuals can be found online under Support. Or if you have the Gema app you can click on the service button and it will take you to the man. On the side of the control unit it’ll tell you which one you have. Let me know if this helps.

@@KennethPWise let me know what part of the country you are in and I will help you with a local distributor

@@KennethPWise let me know what part of the country you’re in and I will set you up with a local distributor

@@يونس-ط5د7ت I have a few questions. Is it mostly on aluminum products when you sandblasted? Are you exceeding the film build specification from the manufacturer? Sometimes when you build too much film back ionization occurs. This means there is too much powder that is charged and cannot dissipate its charge. Super corona helps if you’re trying to build higher mileage without having back nation. Is this a high film build application?

The best place to find me is on LinkedIn under Jamie Argyelan

My Arabic is not very good. What can I help with?

I'm work GEMA lm no p

Thanks Doing great. Thanks for checking in I will get you a new video soon. Anything in particular I can help with?

@@jamieargyelan292 happy to hear from you, I would like you to speak about the farday cage and how to avoid it especially with the automatic gun Gema GA03 or manual gun optiflex

I will work on a video for you.

@@jamieargyelan292 Thanks a lot, I appreciate it 🤝

My favorite settings are 100 KV and 3.5 micro amps. I like my air settings around 45% and 3.5 total air. Let me know how it goes.

This is an old video on how to update the software and the Gema control unit. We now have an update to make it easier to always get the latest software. There’s no need to ask if you have the latest software the control unit will always look for the newest one and tell you if it has already updated. Thank you.

Thanks for your reply. You can go to the Gema website and type in the country you live in and it will tell you where you can buy Gema equipment.

All you need to know is Gema is the best.

Have you looked at the video for KV settings? It should help explain the coding process with voltage and microamps.

Thank you

I would try it on the complicated setting. Or try 100 KVN 18 UA. Make sure the pump is well-maintained. You can see the video on maintaining the pump on my channel.

Gray hoses for air black hose is for fluid

Make sure the lid seal is good and clean. The pressure side shouldn’t exceed 60 lbs.

Thanks hard to do a short video on the CM 40. There’s a lot of information in there. Anything specific you were looking for?

Great question. When you are using the Super, corona ring, the gun will be less efficient. It will make the gun run higher micro amps and lower KV. When you have lower KV that means you will get less powder to stick to the part.

Imagine poor grounding on top of that. I've been debating the point of using them when the controlled thickness must be between 2.4-4.8 mils. I question their purpose in this case. Without them you have more control over settings, for one coat systems on a flat sheet good results can be achieved by having say 100Kv and 5-10microamps , especially for metallics. If orange peel/back ionization is a concern, especially for two coat systems then these can be controlled by managing distance to object and staying withing the thickness provided on TDS.

We just need to make sure were using the super corona tool for what it is designed for. Powders over three mils to help reduce orange, peel, and back ionization.

It’s nice to see you. Have a good understanding of applying Powder Coating. Keep up the good work.

@@jamieargyelan292 , always trying to improve and learn as much as possible. I appreciate your explanation, was trying to get my head around the concept and it helped

A few things quick. Putting powder on faster and more efficiently.

@@jamieargyelan292 can it be use on rims and contour ares? Would it create craters or back ionization?

I have had good luck with wheels. It would depend on the wheel and the powder. Maybe for the first coat. On the second coat, you would want to go to recoat setting.

@@jamieargyelan292 thanks! Very helpful

I'm new to this machine looked at your videos, but have questions. Is there a contact number and time to call you? Thanks

Thanks I have many more. Check out my pump videos

Glad I could help

Do you need a minimum of 85 psi?

If you have a dual regulated pressure pot as shown in the video, you can bring full line pressure to the pressure pot. 125psi max

I would imagine you are sandblasting the aluminum. And you’re probably using some type of super durable. You might want to try chemically treating it rather than blasting.

Thanks for the comment. Let us know if we can help

@@jamieargyelan292 you're welcome, i am a tecnician of gema powder coating bro

Yes where are you located?

@@jamieargyelan292 schoolcraft MI, off of US-131

Here you go. Part #1007514 fluidizing disk. You can get them at FACT filter and coating technology 616-784-3228. Let me know if we can help with anything.

I appreciate that very much thank you

I do not recommend Wanger

Sorry I so not

Sorry no

Correct all units

@@jamieargyelan292 QQ, my supplemental air ball won't float. This is a new unit to me, it sprays but can't get that adjustment in the green. Any ideas?

I would assume you have your air settings very low. What is the incoming air pressure? What is the powder set at?