CoinTaker

Пікірлер

@nightsaints Жыл бұрын

My set from Cointaker went bad after 3 months. Sent email to Cointaker and no response. Had sets from PinballLife for 8+ years without any issues.

@dreadedenterprise51 2 жыл бұрын

I love this pinball game

@TampaTec 2 жыл бұрын

Steve Ritchie is my favorite pinball designer then Brian Eddy and Keith Elwin.

@TampaTec 2 жыл бұрын

You should check out the light up flippers mod looks like lightsabers.

@CoinTakerLEDs 2 жыл бұрын

cointaker.com/products/gnr-pinball-topper-mod-leds

@randallkipker9990 3 жыл бұрын

poorly done... also it looked like the holes did not line up and you modified them.. which is the same as mine, they are not lining up. Then you simply just skipped steps

@randallkipker9990 3 жыл бұрын

Awesome!

@techsture 3 жыл бұрын

Does the color you pick stay if you turn the machine off and on again?

@happygilmore5591 Жыл бұрын

Yes

@afattori316 3 жыл бұрын

They are awesome! Bought two sets and will be buying for my Elvira once I get it.

@904PinballZine 3 жыл бұрын

Muh dude! Yes! We should all do more install vids!

@-Unidentified_Comment- 3 жыл бұрын

Where did you find that shooter handle it looks really nice, I would love to have one 👌🏾

@WesWyzykowski 4 жыл бұрын

Looks really neato! Nice work!

@BLACKROSEMF 4 жыл бұрын

Cool mod Chris ... B cOOl ,, B_R

@skimmaster5000 4 жыл бұрын

I have been looking to buy one but I can’t Decide which one

@pinballguru 5 жыл бұрын

I am buying quite a bit of stuff from you , this video is 4 years old. Is the shaker still the same or has it changed over the years?

@TBayJay 5 жыл бұрын

would these work on an old Sys 6 game?

@CoinTakerLEDs 5 жыл бұрын

Operate on 12vdc, so yes they would work.

@RobsMemoryLane 5 жыл бұрын

Cool video 👍.

@BLACKROSEMF 5 жыл бұрын

U guy_Z Just keep gett_N Better & Better with these Led mods .. I still have yr 1st Generation Flip Led kit installed on my BSD ... And it's Still working , but this New design is Bad AZZ and I like the Mode selector ... And also I like yr sleeve Tattoo on yr rite arm ,, I Hope to see U again N a video when it's Done ( colored N ) .. Tell Chris & Melissa B_R said ,,, Heyyyy !! Later

@davidb.8948 5 жыл бұрын

I'd be concerned that when removed, the Mylar might pull up the paint?

@CoinTakerLEDs 5 жыл бұрын

Sure, why would you remove them? I'd be MORE concerned about the wear without them. With a little heat from a hair dryer I think they would come off no problem. I use them and they work great for us. We install them on our route and show room games to keep them looking like new! :) Thanks for the input.

@russellmyers934 5 жыл бұрын

I would try cleaning the area first, then waxing it just like you'd wax the playfield and then apply the protectors. That's the same method I use for placing mylar pieces on high-wear areas. Makes it easy to remove later and still sticks well enough they stay put.

@Hollyweirdification 5 жыл бұрын

Could this be installed on the apron of my Party zone using the alligator clip?

@CoinTakerLEDs 5 жыл бұрын

Sure!

@Hollyweirdification 5 жыл бұрын

@@CoinTakerLEDs Would I just clip it on to one of my GI sockets?

@vintagecollector788 6 жыл бұрын

I bought these lights for my Limited Edition Kiss pinball and they look awesome....

@zaphod77 6 жыл бұрын

Video quality is crap, and this is one game that is ruined by LED conversion. it messes up the dimming.

@CoinTakerLEDs 6 жыл бұрын

Thanks for your input, sold many to very happy customers! The color is incredible too! If you like incandescent lamps I think you are in the minority anymore. Cheers, have a great day!

@BLACKROSEMF 6 жыл бұрын

I like the Laseriffic Topper looks Awesome and the Custom Apron cards also ..

@MikeGervasi 7 жыл бұрын

It's already one of the brightest pins out there. LED's would be over the top but I like the look :)

@nickhuber154 7 жыл бұрын

Were are you ! ?

@nickhuber154 7 жыл бұрын

In Paradise ?!

@CoinTakerLEDs 7 жыл бұрын

Nick Huber Sunbury, PA

@cigarsandpins4781 7 жыл бұрын

Wow looks awesome! I'll be ordering a pro soon! Thanks for the video

@BLACKROSEMF 7 жыл бұрын

Looks gOOd ,, I Miss Pimping these New Pins out w/ the Best Leds on the Market .. Cointaker ,,, B_R

@BrewersArcade 7 жыл бұрын

Guys turn your phone sideways! You gotta record in widescreen.

@CoinTakerLEDs 7 жыл бұрын

Good call, a little late.......

@BLACKROSEMF 7 жыл бұрын

Nice jOb lining up that hOle on the 1st try ,, I might need a Lil hair around it ,, I'm Out of practice .. :)

@BLACKROSEMF 7 жыл бұрын

Dude ,,, I'm dig-N thOse Led Flipper button ( Super Fast ) multi-color Changing effects .. 1st time I've seen thOse ... CoinTaker just Keeps getting Better .. Rock On ,, B_R

@beadb82 7 жыл бұрын

Is that glow just blue ? Almost looks teal.

@BrewersArcade 8 жыл бұрын

Gotta hold your phone in portrait mode man! Mods look good. If only I could afford to order a GB premium from you!

@BrewersArcade 8 жыл бұрын

Great video Chris! Looks awesome

@NewYorkPinball 9 жыл бұрын

www.johnpopadiuk.com

@MonkeyspankO 9 жыл бұрын

pls make one for the x-men, like a magneto head for my LE

@mrthewubbie 9 жыл бұрын

Seriously the coolest damn thing I have seen in a while. Can't wait to upgrade the old Xenon now! Shared! What music did you use?

@BLACKROSEMF 9 жыл бұрын

Sweet , makes me want AC/DC again !!! B_R

@PinBallReviewerRepairs 9 жыл бұрын

riverlifeva I know your comment is 3 years old but I have Cointakers in my H-S and G.I. frosteds in my LaserCue and I did nothing to the boards it is easy as just putting them in the sockets.

@904PinballZine 9 жыл бұрын

Look forward to this!

@CoinTakerLEDs 9 жыл бұрын

904PinballZine Sounds like it might be a long time, if ever. I think John was more focused on himself than actually building these machines. Very sad for the pinball community!

@ebjimmyg 10 жыл бұрын

backbox kit looks cool

@BLACKROSEMF 10 жыл бұрын

lOOks Cool as usual Chris !! Keeo up the gOOd work .. B_R -- P.S ,, Can't wait to get my IM VE ....

@SuperKissFan1 10 жыл бұрын

I have a KISS pinball and want to covert it to LEDs also. The machine looks amazing...

@tdickensheets 10 жыл бұрын

I play this pinball.

@davebouwman2722 10 жыл бұрын

I prefer the retro led bulbs. It would looks better on this machine.

@cannonskier 10 жыл бұрын

will theses work with twilight zone.

@CoinTakerLEDs 10 жыл бұрын

Sure will, I put Blue ones in. shop.cointaker.com/category.sc?categoryId=23

@NaturalProgressGames 10 жыл бұрын

Looks great. Good work as always. Cointaker +1 place for pinball LED's.

@NaturalProgressGames 10 жыл бұрын

LOL... nice machine.

@chadn70 11 жыл бұрын

I agree!

@CoinTakerLEDs 11 жыл бұрын

I have a New in box for 5199.00 Has 2 translites.

@rociov11000 11 жыл бұрын

hello i luis from chile sate bio bio , cuestión you recording chip od sound room for silverball mania ? pease i need , sending for smail yes or not ??????? i not tank

Ең жақсы KZbin

Пікірлер