Благодаря!

You need at least 500 mAh 7.4 v battery. I use GensAce 800 mAh 11.1 v 25C with Deans connector (the Wolf is re-wired from JST to Deans).

Не е RunCam, a Foxeer Legend 4K с 35 mm обектив.

Пробвал съм я с няколко цеви, не ми хареса. За момента няма какво да бие р-хопната цев като консистентност и точност на стрелбата.

Tried it, nice results but in no mean better than Maple Leaf Super or Macaron. 4UAD Friction works better with barrels with narrow window.

@@NikolayDimitrovFishermm… have you tried umbrella armory rhop barrels? Looking for a good rhopped barrel, good lapping for my dmr built.. will use a silent industries hop up

@@danielarturodebernardogome832 consider buying r-hop patches from Sniper Upgrades or Snipetor (if you're in EU) or ElvishTac (USA) and make your own r-hoped barrel.

@ have a snipetor rhop for my pdi, but I am looking for a good lapped barrel and deciding between wide or tight bore…

Goated for real

The soft orange one. It's made from the same material the original M-nub was made from.

2*0.1 + 1*0.25 = 0.45 mm

@@igorsoares2451 i have MTW since december 2019. There’s plenty of gameplay and test videos with it here on my channel. In theory the Wolf is better. In practice - if you tune them properly they both perform equally well.

@@NikolayDimitrovFisher I already watch a lot of videos in your channel and I saw you also have f2 and others systems like mtw, in your opinion what’s the best system in market?

@@igorsoares2451 best overall if you just want to play and have fun - MTW Forged. If you're not afraid to tech your own toys and deal with all sorts of possible issues (alignment, nozzle length, etc.) just to have slightly better performing replica - Wolf.

@@NikolayDimitrovFisher and what's the most quiet system?

@@igorsoares2451 Wolf

Yes

The best? R-hoped 6.05+ barrel (i prefer 6.08), flathoped Madbull 'red' bucking and whatever hopup fits & work in your replica with least amount of problems. I use Maxx M4E but i have very good results with modded VFC plastic rotary too.

@@NikolayDimitrovFisherdo you pregger rhopped barrel and aeg hop up over gbb bucking on m4g?

@@danielarturodebernardogome832 yes, this is still my favorite combo

@@NikolayDimitrovFisher amazing, just modified my red shark bucking for next week. Is there any bb brand you recommend? Currently using raccoon premium bbs.

Yes, with slight mod to have working bolt catch

Accuracy wise the M4G is not better or worse than M4E. With selected buckings like ML Wonder or Super you can have the same accuracy like with ML Super or Macaron.

@@NikolayDimitrovFisher as far as accuracy, would you say these set ups described are the best on the market right now?

@@danielarturodebernardogome832 for me - they're among the best hopup upgrades. The only hopup that i would choose over them is VFC plastic rotary.

Благодаря! Ще има. И геймплей, и тестове :)

My experience exactly, but G&G 'green' is highly recommended by SI for Alpha so that's why i used it here. My R-hoped PDI 6.08 works much better in Alpha with flathoped Madbull 'red' - kzbin.info/www/bejne/e5KUpn-ZibugjpY

The most consistently well performing upgrade of the forged MTWs around me is the R-hop. You can see it here - kzbin.info/www/bejne/bnKtaWd_gaaZr6s The first MTW is forged with stock hopup & R-hoped PDI 6.08.

​@@NikolayDimitrovFisher I did try make patch from sugru and It looked great but worked awful absolute sh#t then I tried with already made to just cut out for own preferences same story, never had luck with that and never tried again, flathop is 10x easier to make and works ..alright tell me, do you have to super glue it after in barrel window walls or not ? Would be awesome if you could make a video on "how to do working Rhop"

8х2 mm.

@@sausageofmarnies2799 check nozzle-to-hopup alignment and nozzle length.

Have checked everything, even tried it in 4 different guns. Bought a new ML Crazy jet barrel. Still not working

@@scandimanairsoft roughly twice as many shots compared to my MTW with Inferno. IMHO the Sparklabs WOLF is the best HPA engine currently available on the market.

@@NikolayDimitrovFisher Ok, so if you have a 0.8 l 3000 psi tank how many shots rouhly? I agree it seems very good, I did not understand how it worked at first but after reading up on how the nozzle works it sure seems like the best electrical hpa engine, I still love the kythera though for not needing battery, and if you know how to tune it it is a real best imo.

@@kruszy76 both hopups perform well if you pair them with proper barrel and bucking and everything (nub, mound and window) matches. If you already have M4W I doubt you’ll see any noticeable improvement spending 80+ EUR and going with SI Alpha.

:) there's lots of ready to use R-hop patches that are really good and wouldn't give you a headache installing them. Even more so, the Macaron-like buckings are very close to R-hop in terms of accuracy and groupings so there's no much sense to make your own patches any more unless you know how to squeeze the maximum from the materials.

@@NikolayDimitrovFisher got it!

Yep.

in this case it's a custom made from 3M silicon foam - photos.app.goo.gl/LfyMxhCTs1z322Mx7

@@NikolayDimitrovFisher thank you so much brother to take the time to answer me!

@@NikolayDimitrovFisher so, you modified the stock hop up arm to put the flat m nub right?, you have to filed the "U" chape from it?

@@TorksTube Exactly.

@@NikolayDimitrovFisher great!! thank you!!!

The one i use for the last 2 years - M4W with the default M-nub, R-hoped barrel, flathoped Madbull 'red'.

@@NikolayDimitrovFisher perfect! thank you so much brother!. did you now there is a MXW maxx model hop up chamber, that its cheaper than the M4W, did you know why is this? the diferences that i can see its that doesnt have the holes on the sides and it comes with less nubs and parts. do you think its going to work the same?

@@TorksTube yeah, i know, i have one. There's no difference in performance between them.

@@NikolayDimitrovFisher you rock brother!! thanks!

@@NikolayDimitrovFisher hello again brother i just get the MXW and the madbull red bucking, i have an prommy rhop barrel, and when i put all together i have to cut the buckling a little bit because doesnt allow me to put the C clip, this its normal?

I use the standard M4 nozzle in my F2.

@@NikolayDimitrovFisher awesome, I’ve been planning a build for a while, with a maxx hop and f2 but I wasn’t sure if I’d need a slightly longer or shorter nozzle for the best air seal

With file, carefully.

@NikolayDimitrovFisher Haaa ok and where did you filed it of the left or the right of if you look at the window when it's left in front of you?

@@NikolayDimitrovFisher or evenly on both sides?

@@MrMolotovv i did this 10+ years ago. The goal was to make the barrel window match the ProWin's window. Now you don't have to do that, especially if you'll use bbs lighter than 0.40g. The regular 4.5 mm window of the PDI is more than enough with properly installed ready to use R-hop patch (ElvishTac, Faceless or Snipetor) and 4 mm M-nub.

@@NikolayDimitrovFisher ok thx

@@DD-xv3kp best advise is to get a chrono and follow the instructions in the dwell settings videos or manual. My 10” MTW is at setting 8 for 1.6 J with 0.40.

in FE the dP isn't so crucial as in other engines. You'll mainly be adjusting the dP to ensure the engine fires on the first shot rather than changing the air volume.

Very strange. I've never experienced something like this in my tests. Quite opposite - i have very consistent bb placement in front of the nozzle and fps readings.

@@NikolayDimitrovFisher Thanks for your reply. Now I have fixed it, adding a stronger tappet plate spring from KOA made it very consistent 1-3 fps difference between shots.👍

it's replaced by M4E unit that have all of its benefits.

it's just a phone camera behind a laser rangefinder.

Wolf advantages over F2: + ridiculously air efficient; + nozzle with no wobble; + you can easily fine tune the nozzle length; + adjustable speed of the nozzle forward movement (bb loading force); + nozzle & poppet movement timings doesn't depend at all on input air pressure, your engine will perform in the same way on 50 PSI and on 120 PSI; + different gun profiles in FCU with easy switch between your CQB, assault or DMR roles; + magnetic trigger and optical selector sensor (no fragile microswitches); + lower sound profile. ------------------------------------------------------------------------------------------- F2 advantages over Wolf: + cheaper than Wolf; + cheap and accessible spare parts - trigger board, FCU (P* TB - 30 EUR, FCU - 90 EUR, Wolf TB+FCU - 230 EUR, Programming unit - 85 EUR); + you can mount it in gearbox shells other than V2; + you can use it with bluetooth FCUs like Gorilla or Gate Titan II HPA. Performance wise there's no significant differences. They both shoot great.

@@NikolayDimitrovFisher Thanks!

Hi. No, no PTFE tape mod is needed. The white delrin nozzle isn't crucial, you can use the stock black v1 nozzle. The only mod needed is sanding down a 0.1 mm from the Flamingo lips because it's 15.5 mm long and ML Wonder that was used in MGW design is 15.4 mm. That's all.

If you have an old gen Prommy EG - get a black Begadi SHP5 (70°) or blue (Super) Macaron and use the hard concave nub with Maxx.

@@NikolayDimitrovFisher great! i dont know if my promy barrel its the old gen, but its EG for sure, i can find the super macaron blue, and the hard concave nub, you mean the metal one right?. i case of buying a craze yet maple leaf inner, what do you recomende me? (for the same build, F2, max model hop up and DMR build) thanbk you so much for the response!

@@TorksTube yes, exactly.

@@NikolayDimitrovFisher hello again brother!, i just bough a Rhop for my prommy inner 6.03mm, what bucking did you recomend me and what nub? i have the maxx model hop up and retroarms too, or you are still prefering the super macaron with the hard concave nub? thanks!!

@@TorksTube best bucking for R-hoped Prommy is flathoped Madbul Shark (red). For nub - the preinstalled 4 mm soft orange M-nub in Maxx.

The MTW is on a bench rest. There’s no movement. I prefer to test outside because I play only outdoor.

I can see the movement of the rifle in ur scope cam. And u dismounted the rifle for changing the Hopupunit. So what are u telling me?

@@stephger1925 with 35 mm lens every insignificant move is amplified in scope cam frames. Even the vibrations from shots. This is not a lab test. But for my purpose it's more than enough.

@@stephger1925 Why the criticism? I rather see testing in normal conditions. I use the Alpha with super MR 70 and black nub without R-hop in the standard MTW barrel. This weekend with 0.30 BB shooting arround 60m with out any issue. Do thinking of upgrading the barrel to a PDI 6.08

Yes, you need to cut the side wing of the bucking. The hopup works really well with ML Wonder or R-hop like GBB buckings.

No. It requires a unbridged barrel with AEG side cuts for the C-clip like Maple Leaf Crazy Jet, ML hybrid barrels or Stalker Morpheus. And it works only with GBB buckings.

@@NikolayDimitrovFisher would you recommend a stalker morpheus and gbb soft bucking over a silent industries with soft bucking aeg?

@@danielarturodebernardogome832 in my MTW Maxx MGW with Stalker Morpheus and Stalker R-hop patch and sleeve bucking (or Flamingo) works better than any regular AEG bucking. I avoid recommending anything. I prefer to post my results and let everyone decide for themselves if they like them and would like to try something similar in their replica.

@@NikolayDimitrovFisher have been trying lately the 4UANTUM new aeg bucking. Getting pretty good results 7x7 cm grouping at 30M. Will be for sure trying what you told me, as I already have the m4g…

You can order it from McMaster - www.mcmaster.com/5109K31/ and cut the piece you need. And you have to modify the stock arm to glue the nub. It's the same nub that comes pre-installed in Maxx M4W/MXW/MGW. photos.app.goo.gl/9HY1Dyf29rvGNHLQ9 photos.app.goo.gl/HdRde2W1tG9tTpPi9

FPS and accuracy wise - it's slightly better than M4E.

@@NikolayDimitrovFisher is it a noticable difference like you see it when shooting, you see it with a chrono or how much?

@@marcoviebrock1550 i wouldn't say it's noticeable that much to substantiate spending 90 EUR for it if you already have a good working combo. Definitely M4G shows more consistent FPS readings on chrono. Also with M4G and GBB buckings you have more predictable and flatter shots. IMHO the only AEG hopup combo that can compete with M4G is R-hoped barrel with flathoped Madbull 'red' in M4E. But R-hop is PITA for install and fine tuning.

On this field there's no MED for up to 1.7 J and most of the engagements are on 20-30 meters. 0.32s are more than enough for this.

@@NikolayDimitrovFishercan you do a gameplay with the silent hop aeg I really want to see what it’s like

@@JesusMySavior78 my next video will be with SI Alpha in this build.

@@NikolayDimitrovFisher thanks I’m hopefully gonna buy it soon

Redline SFR

Cool!!! ☺️👍

Yes. Not so good in applying consistent hop effect as the soft M-nub. I had too many random vertical flyers.

It's not actually an open bolt mode. More like an AEG mode - the F2 nozzle is forward biased and cycles to load the bb after the trigger pull. I can easily achieve consistent accuracy with Cbof and properly tuned dr (return to battery delay) setting since the hopups are designed to work with this mode.

I consider adding ENG subtitles in my future videos

So now I don’t know what to do. It’s not working. Trajectory must be laser at least 70 meters. It goes 40 and then goes wrong. Velocity stable

@@AirsoftSnipingUA the trolley position in MGW/M4G hopups is aligned with the patch of the GBB bucking in unbridged barrel. The crucial things for accurate shots are the lips resistance (especially for HPA where the nozzle loads the bb with more force compared to the bolt action snipers), the consistent nub pressing and the consistent bb placing inside of the bucking before being fired.

Yes. Without cutting it you can't fit the bucking. And you need to sand a little from the X-Range lips so you can lock the C-clips. Modify bucking is ~16mm long. Maple Leaf buckings are 15.4 mm.