4 ай бұрын
4 ай бұрын
Пікірлер
@tarlocksagoo7190 4 күн бұрын
Color match is not good.
@zabzproject1416 4 күн бұрын
It must be the colour difference in spray can, as someone mentioned earlier 🤦🏽♂️ we got the right colour code but still didn’t match after painting the wing 😢😔
@unacknowledged3537 6 күн бұрын
Great work man, it looks great, besides the slight colour difference, otherwise, it's amazing, keep it up man!
@jon-kp2rq 5 күн бұрын
slightt?LOL!!
@zabzproject1416 5 күн бұрын
@@unacknowledged3537 💯 agree on the colour 🤦🏽♂️ Thank you
@zabzproject1416 5 күн бұрын
@ any suggestions why the paint didn’t match? It was the correct colour code, bare in mind it’s the first time spraying OEM colour code with spray can 🤦🏽♂️
@rvdb1863 6 күн бұрын
Good job, besides the colour difference😢
@zabzproject1416 6 күн бұрын
@@rvdb1863 thanks, we still don’t understand why there’s a colour / shade difference . The colour code was matched 🤦🏽♂️ In our defence, it was the first time spraying to match the oem colour with spray can 😔
@rvdb1863 5 күн бұрын
@ maybe spray can. But nice job.
@zabzproject1416 5 күн бұрын
@ your right could be 😢
@balafae2864 5 күн бұрын
@@zabzproject1416 its just how it is with spray cans i deal with it all the time, the reason for it is because the car is quite old so overtime as heat absorbs and other factors the paint fades and hazes out so it becomes less apparent, so that's why there is a colour difference, you can use some polish on the areas were you have not painted it usually brings back some colour in it and it will match up just that little bit better. hope this helps
@zabzproject1416 5 күн бұрын
@ thank you so much for the info, much appreciated.. 💯 shines some light on the reason why the paint had that difference in tone & most of all, coming from a person who does this all the time 😍👊
@pursuit.8847 9 күн бұрын
Thanks so much
@Mati_Pati 10 күн бұрын
Which year is your Audi A3? I am also reparing my A3 (2012) and Im going to try this. Thanks for the video, straight to the point.
@zabzproject1416 10 күн бұрын
@@Mati_Pati 2010 plate the Audi A3 was, appreciate you taking time out for the feedback and all the best with your Audi 👍
@Mati_Pati 10 күн бұрын
@zabzproject1416 Thanks brother, I'm trying to learn how to do some of the bits myself. would you know the alloy size for this model? I need to buy original Audi alloys as the previous owner swapped them.
@zabzproject1416 10 күн бұрын
@ They are 18” and I think 8 or 8.5j not 💯 sure on the width 🤦🏽♂️
@06Radioactive 12 күн бұрын
Good job ❤
@AbdulQuddus-zm2xt 14 күн бұрын
Good work
@mikehsmith1 16 күн бұрын
I love our little Honda jazz but this design to access the headlight bulbs is just awful . Designers should be ashamed of themselves on an otherwise perfect car !
@zabzproject1416 16 күн бұрын
@@mikehsmith1 I 💯 agree with you, it could have been designed better to access the headlight bulb easily 🤦🏽♂️ These cars are amazing but annoying at the same time 😂
@OwenThomas-t5l 20 күн бұрын
2p peace either end does the same thing lol
@zabzproject1416 20 күн бұрын
@@OwenThomas-t5l 😂
@z1d5n32 21 күн бұрын
hey are you selling this car by anychance ?
@SonofChurchill 22 күн бұрын
15 code. RAC wouldn't come out as as car did have MOT. Car couldn't start for me to drive to garage for planed MOT.
@10yrsuprakid 24 күн бұрын
I was gonna buy one on gumtree
@zabzproject1416 24 күн бұрын
@@10yrsuprakid what happened?
@tearki484 25 күн бұрын
Thanks for the vid bro
@zabzproject1416 25 күн бұрын
@@tearki484 your welcome bro, appreciate you taking time out for the feedback 😇👍
@balraccsingh8559 28 күн бұрын
thanks for the video bro helped me opening the dash on mk7
@zabzproject1416 28 күн бұрын
@@balraccsingh8559 your most welcome, we appreciate you taking time out for the feedback 👊
@ryosuketakahashi4957 Ай бұрын
Got a problem on my fiesta like this. Did let me in to do diagnostics. But it may just be that fuse
@zabzproject1416 Ай бұрын
@@ryosuketakahashi4957 💯 look at the fuse first 👍 Hope it’s a small fix for you 👍
@ryosuketakahashi4957 Ай бұрын
@zabzproject1416 hopefully it is. I was dead worried about the PCM being fried. A fuse definitely seems much more reasonable than an entire module all cuz I tried to jump start it🤣
@zabzproject1416 Ай бұрын
@ def sounds like a fuse, these cars don’t go well with a jump start 🤦🏽♂️
@ryosuketakahashi4957 Ай бұрын
@@zabzproject1416 for sure. I've been jump starting transits just fine and I've only just been told by tge master tech that these fiesta hate being jump started. Thanks for the video though! It should help me getting it back up and running
@davey6024 Ай бұрын
Straight pipe it
@zabzproject1416 Ай бұрын
@@davey6024 we were thinking the exact same thing but it might be too loud 🤔 Or we can go for an exhaust back box upgrade 😍
@josephthompson4363 Ай бұрын
Best video i hav seen for dash removal excellent and thanks for sharing
@zabzproject1416 Ай бұрын
Wow, thanks! We really appreciate the feedback 👊
@itsrigoo5035 Ай бұрын
I have a 2008 micra manual, it’s having problems that it doesn’t stay on, I turn key and it starts but with no power at all and it dies, if I turn key and keep pressing the accelerator until it stays on, then it remains on, what could be problem? I changed all spark plugs but no coils, I was told it could be fuel pump?
@zabzproject1416 Ай бұрын
@@itsrigoo5035 Hi, have you tried putting it on diagnostic computer? There could many reasons… including coil packs and throttle body / sensor.. You’ll need to put it on diagnostic to see what error codes show 👍
@RosieGeria Ай бұрын
Hi, I experienced the same thing. I tried turning on the engine and won't start and I figured it's my remote needed battery replacement. After replacing it the car engine finally started and drove a few minutes but I've noticed the "Key not detected" error and "Immobilizer malfunction service now" is still appearing in my dashboard with the warning sound. Can you please tell me what might be the issue?
@zabzproject1416 Ай бұрын
@@RosieGeria Hi, did you count how many times the sign flashes and count again after the pause ?
@RosieGeria Ай бұрын
@zabzproject1416 I didn't count but it's like every 2-3minutes with the error sound. Other than that I noticed that the aircon blow is fluctuating when I try to set it in 4 bars. It never happened before and only today I've noticed it. What might be the problem?
@zabzproject1416 Ай бұрын
@ so the issue we had was a fuse blown, you could possibly check for any blown fuses.. if you could count how many time the immobiliser lights flashes and then wait for a phase and then count again.. that would indicate towards the problem 👍
@RosieGeria Ай бұрын
@@zabzproject1416 How can I know if the fuse is blown? And can I know the fuse number I should look for? Also, is it still safe to drive to take to a mechanic and is the fluctuating aircon blow connected to the issue?
@zabzproject1416 Ай бұрын
@@RosieGeria once you counted the flashes I can have a look and see what fuse would possibly be blown, you can also get a fuse tester and see what fuse is blown.. if the car starts and drives then should be good to take to your local garage… what does the car currently do? The heater blower may need changing hence the noise
@midochan4830 Ай бұрын
Please bro can you send me the link to buy the fenders
@zabzproject1416 Ай бұрын
@@midochan4830 Hi these are the Z-Tune wings for r33.. We got them from eBay.. here is the item number; 373619834689
@bullitautorepairsmobile4989 Ай бұрын
Thanks , one idiot on here said you have to brake the light ,ha ha and then buy a new one,
@zabzproject1416 Ай бұрын
@@bullitautorepairsmobile4989 🤦🏽♂️ not the only way to replace brake light 😂
@bajraktar2592 Ай бұрын
14:09 hey, i can‘t remove that metal piece where the knee airbag is attached to. I already removed the twp bolts but it‘s not moving. Any ideas?
@zabzproject1416 Ай бұрын
@@bajraktar2592 Hi, to remove the metal bracket for the knee airbag your going to have to remove 2x 10mm bolts on the right of it (above) & 1x 10mm bolts on the left of it (above), if your just removing the dash then 2x t20 bolts removed should allow you to free the dash… Please see link of my other video below (4:07) showing how to remove this bracket. 10mm bolts X3 in total (these are hidden behind the dash 👍 kzbin.info/www/bejne/nZLWpJxqeaqpfZIsi=qMvk-pwCrHEZ_EqZ
@bajraktar2592 Ай бұрын
@ it worked! Thanks!
@zabzproject1416 Ай бұрын
@ brilliant 👊
@vladimirpetrov4843 Ай бұрын
Thank you very much. You have helped me in my life. Now I am going to install it. I wish you health and may there be more people like you helping in life. God bless you.
@zabzproject1416 Ай бұрын
@@vladimirpetrov4843 thank you so much for a positive feedback, we appreciate you taking time to comment.. all the best 👍
@YousufHussain-p6r Ай бұрын
I’m doing this tomorrow fitting a pioneer. Video is perfect and to detail. Giving me a peace of mind. Thank you for posting this detailed video very helpful.
@zabzproject1416 Ай бұрын
@@YousufHussain-p6r Thank you for such a positive feedback, we really appreciate you taking time out to comment 😍👊
@danny_mills Ай бұрын
Annoying video, put your bloody seat belt on man... What's the point in blanking the egr and failing mot every year?
@keefardin612 Ай бұрын
HI WILL IT WORK IF THE IGNITION BARREL IS KAPUT?
@zabzproject1416 Ай бұрын
@@keefardin612 maybe not, unless you can get the ignition on?
@pendijital2584 2 ай бұрын
Hello, I have a 2005 model 1.2 engine k12. I connected my vehicle to the device. Errors with codes P1121, P1122, P1706, P1171 appeared. It runs jerkily and bounces at low speeds. Which one should we start with?
@nuggetslayer7400 2 ай бұрын
Such a sweet car
@zabzproject1416 2 ай бұрын
@@nuggetslayer7400 Thank you 🤩
@xobk 2 ай бұрын
Nice thanks man, this was my main fear of getting an android unit.
@zabzproject1416 2 ай бұрын
@@xobk no problem, we have had a lot of comments regarding this.. we appreciate the feedback 👍 Thanks
@TyGee777 2 ай бұрын
😅... thanks guys! I love when people actually make the type of videos that really work. I my eyes got big when I seen it pop up. I was in a jam, lost my bank card (one being mailed), no mail box key so it would have been a few exrdays just to get the key and its friday (just before the weekend), and would have had to ask relatives to pay for locksmith, which i would try to avoid at all costs. Lol... whew! Thanks again💪🏾
@zabzproject1416 2 ай бұрын
@@TyGee777 what a dilemma 🤦🏽♂️ We are glad this video helped in such a difficult time and most of all saved you money as well as hearing how easy and simple it was to understand our guide through content 😍 Thanks again for taking time for feedback.. we really appreciate it 👍
@AlphaBeta-vq6ks 2 ай бұрын
How’s it working out for you? Got a link for it? I’m looking to due the exact same upgrade.
@zabzproject1416 2 ай бұрын
@@AlphaBeta-vq6ks Hi, the stereo is actually really good.. The only issue is that it’s got a live power and even with ignition off the stereo is getting a positive feed.. we will be making another video on how to power it on and off via the ignition, so please watch the space. I just had a look but can’t see the same seller selling this item but if you look at eBay that’s where we got it from 👍
@AlphaBeta-vq6ks 2 ай бұрын
@@zabzproject1416 I’m new to cars honestly. Does that mean it’s draining the battery even when the engine is off? Does the cigarette lighter also do that?There’s a lot of these types of android looking radios tough to tell which one is good.
@LewisFoster2024 2 ай бұрын
So how exactly was it running before you did this? Mine is running lumpy like it's not firing all cylinders, compression is all good, new plugs, leads, new dizzy cap and rotor arm, injectors serviced and tested, ecu repaired, yet still getting lumpiness throughout rev range from idle to high revs
@zabzproject1416 2 ай бұрын
@@LewisFoster2024 so ours was misfiring on cylinder 3 & 4 also was lacking in power / holding back… After this was done it seemed to run smoother and had a better throttle response.. Have a go it’s not too difficult to do and it costs absolutely nothing but your time, if this works for you then you’ve resolved the issue 👍
@LewisFoster2024 2 ай бұрын
@@zabzproject1416 Hope so, already spent a fortune guessing different things to no avail, how did you find out it was missing on 3 and 4? I checked all leads with my timing light and all firing
@zabzproject1416 2 ай бұрын
@@LewisFoster2024 when we took it for test drive, it was holding bk on certain revs… Go for the distributor timing like we did and see what happens, make sure to let us know how you get along 👍
@LewisFoster2024 2 ай бұрын
@@zabzproject1416 Ok, I tried this and the marks on the distributor were already lined up perfect so that isn't my issue. Still fishing for answers.
@zabzproject1416 Ай бұрын
@@LewisFoster2024 Did you make sure the cams are all aligned and your first piston was at the top position? Have you done compression test?
@gojkotrbuk6492 2 ай бұрын
Nice one mate!
@zabzproject1416 Ай бұрын
Thanks for the visit, we appreciate you taking time out for feedback 👍👊
@polosev 2 ай бұрын
NOOOOOOO!!! NEVER lift up window switch plate at that end first. it breaks the slot that holds it as you can see. now every time the passenger pulls the door closed, the switch plate will pop out. (in this vid) right side slots in left side is where the clip is and must be removed first, the slid to the left
@zabzproject1416 2 ай бұрын
@@polosev Thank you for the feedback and correcting the error. Much appreciated
@reubenkatzpianos 2 ай бұрын
You a good man, daughter’s car sorted thanks to you!!
@zabzproject1416 2 ай бұрын
@@reubenkatzpianos Your most welcome, we really appreciate your positive feedback 😍
@0bjectBillion 2 ай бұрын
👍👍👍👍👍👍👍👍
@nen-ire 2 ай бұрын
Hey man this worked great i never knew about aligning the notches on the gear thank you
@zabzproject1416 2 ай бұрын
@@nen-ire Hi, really glad to hear this video helped. Thank you for taking time out for the feedback, we really appreciate it 👊
@syre5722 2 ай бұрын
Where did you get the paint from?
@zabzproject1416 2 ай бұрын
@@syre5722 Hi, you can get it from Halfords, eBay or your local car part shop 👍
@Patrick-ou9xn 3 ай бұрын
thanks man. Can you put together a tool list?
@eman-q9k 3 ай бұрын
Where did you get the extended spoiler?
@zabzproject1416 3 ай бұрын
@@eman-q9k we had a spare blue motion VW Golf MK6 & we removed the extended spoiler 👍
@henry9606 3 ай бұрын
I've removed the bolt but the camshaft isn't coming out easily as you show in the video. Any ideas?
@zabzproject1416 3 ай бұрын
@@henry9606 see if you can wiggle it out, right to left whilst pulling it towards yourself 👍
@redpig1120 3 ай бұрын
Nice video
@zabzproject1416 3 ай бұрын
@@redpig1120 thank you for taking time out for feedback, we really appreciate it 😇
@mihaihegedus8610 3 ай бұрын
Thanks for the video❤
@zabzproject1416 3 ай бұрын
@@mihaihegedus8610 your most welcome, we really appreciate your support to the channel and taking time out for feedback 😇
@dannyandaadamsworld9139 3 ай бұрын
Good job lads
@zabzproject1416 3 ай бұрын
@@dannyandaadamsworld9139 Thank you, we really appreciate your feedback & support 😍
@chrome8481 3 ай бұрын
great video!!!
@zabzproject1416 3 ай бұрын
@@chrome8481 Thank you, we really do appreciate your support & welcome any feedback to improve 😇
@gamingwithnessa9743 3 ай бұрын
I’m looking at a Supra to buy and the owner says it’s running rough because of delayed timing. Will this method correct the timing? It’s the same non vvti motor as yours by the way. Thank you sir!
@zabzproject1416 3 ай бұрын
@@gamingwithnessa9743 I would recommend to check for compression test to make sure all cylinders are good & then we can assume it’s the firing order / timing that will need adjusting as well as servicing the spark plug & ignition leads 👍
@bernardbernard7249 3 ай бұрын
Merci
@zabzproject1416 3 ай бұрын
@@bernardbernard7249 Your most welcome 😇
@Arn560 3 ай бұрын
Tatty & neglected car.
@zabzproject1416 3 ай бұрын
@@Arn560 agreed on it being neglected 🤦🏽♂️
@johnnybravo7490 3 ай бұрын
Avensis*
@zabzproject1416 3 ай бұрын
@@johnnybravo7490 hahahaha didn’t even realise I mentioned ‘Supra’ instead of ‘Avensis’ 🤦🏽♂️
@MAKEBA23 3 ай бұрын
make better video amateur
@zabzproject1416 3 ай бұрын
@@MAKEBA23 Hi we take all feedback seriously to improve, would you like to elaborate, could you show us your professional video so we can learn?