@@stephanewanner3358 merci beaucoup pour le commentaire et content si l'outil plaît. En effet l'outil, dans sa dernière version fonctionne sur ZBrush 2024.

​@@maximeforveille4663 et tu as un gap idéal à recommander pour une pièce de haute taille ? Le 0,2 devra être rempli par du milliput et poncé du coup...

@@stephanewanner3358 l'avantage de l'outil c'est que le gap est à la bonne échelle (si bien entendu on oublie pas de régler la taille mais c'est le premier truc à faire avec l'outil) donc petit ou grand modèle ça n'a pas vraiment d'importance pour le gap, c'est plutôt la précision de la machine et la qualité de l'impression qui compte. Pour le post-traitement, c'est au cas par cas mais idéalement le gap choisi réduit au maximum ce côté là. L'idéal serait de faire des tests sur des petites pièces avec plusieurs valeurs de gap et vérifier ce qui fonctionne le mieux en sortie d'impression.

Hi, I can't tell without more informations. Please use the form from the documentation so I will be able to help you then by messaging or even in video call if needed.

Hi, you already can use any kind of cutter design since there is an option to convert any Subtool as a Cutter and they will act like others about sizing and so. However keys won't be place at the right spot or even size automatically like it is on the currents Cutters, so you will have to move keys by yourself then. If you have any subjection, I would be happy to read you :) My plan for the future is to add articulated keys but don't know when I will find time for it.

Hi, It is not design for that purpose actually but there are some ways to do it. If you want any holes without keys, you can actually use any Subtool and convert it as Cutter (basically cutters are holes with no keys). So you can have a specific Ztool with a cylinder with correct sizes which would be your "toothstick cutter" and import it anytimes you need in others Ztool for 3d print. For now if you want a very straight cut, same thing you would need to use an object, let's say a plane, and convert it as Cutter. I don't know if my tool would fit your needs but hopefully my answers are clear enough.

Merci pour ton commentaire, je suis heureux qu'il te fasse gagner du temps c'est clairement l'objectif principal de cet outil :) Hésite pas à laisser un avis sur la page Arstation (pas d'obligation bien entendu) j'en ai trop peu comparé au nombre d'utilisateurs qui me disent être satisfait pourtant ^^

Hi, no you can use it on any kind of files since they become Subtools once you import them. The only problem is that sometimes STL you found on internet are too bad in topology so some boolean can be hard to get or but not the cut itself. I could definitely help you if that the case, you can use the form link from the documentation to contact me and give me more details if you want my help.

Don't you saw my reply a couple of days ago on the other video? I was telling you that I just tried on ZB2024 and it actually works fine with no need of an update. However I will make a small update pretty soon but with nothing crazy ;)

Honestly I don't think I will find the time before a long period. I'm already fully booked by work + others plugin dev and so on. Maybe one day ;)

thank you for coming back to me, understand 100% - good luck with everything ! Best @@maximeforveille4663

Thank you Henrique. I'll try to make the update asap (I mean if needed, I should first check if it needs an update or if it works already. I'll let you know). See you soon Brazil ;)

Hi Henrique, just a message to tell you I finally took the time to check how it goes on ZB 2024 and I can tell you it works fine actually with no need to an update. I still plan to make a small update cause i'd like to change a couple of things but basically you can use it right now if you want to, updates are free anyway?

I'm glad you like it 🥰 To be honest I didn't look at it for a while and there are probably few things that could be done better but I am very happy it fit to you :) Don't know for the review 🤔

The best would be to hollow after this especially for placing keys. Most of the time you will hollow within your slicer (much easier and precise)and not in ZBrush actually.

Thanks! Unfortunately I don’t have my own printer yet so will just be preparing myself to send to an online service

Hi, not it doesn't. You need to have at least ZBrush 2022.6 I didn't made it compatible for previous version since update and upgrade were free at that time. However if you can't upgrade and really need it compatible with 2021 that's something we could discuss.

@@maximeforveille4663 hello again. In this moment I can’t upgrade 2021 version, and I don’t know if I want because some expert people in zbrush recommends keep 2021 version. Have you got any option for me?

I'm not sure about what you have in mind concerning the outer wall, the gap size is editable but maybe that's not what you mean. If not already maybe you should have a look at the full video (there re 2 main part and one more the recent update) in here kzbin.info/www/bejne/eavTq2SFl6aSZ5I to see correctly exactly what this tool does. Best

I'm glad it has helped you :)

You can use it as much as you want, but you are not supposed to used it more than once if it's for business.

Hi, I actually just finished to make this update and I just need to comp the video. So it will be available on Artstation pretty soon, probably tomorrow morning but maybe tonight if I can.

There is no special rules, you can do it like on any other mesh but to make it easier and faster I would probably do the UV before all the array process, I mean at least before to convert the arraymesh as mesh.

Hello, not yet unfortunately. I will make an update about it from middle March and it will be free for all previous owner. I can't do it right know cause I'm too busy by work.

@@maximeforveille4663 Dear Maxime, any news about the ZB 2023 update ? Thank you so much !

​@@scrydedoria2435 Hi, it's on its way, I got a little bit of delay cause I needed to wait before getting this version of ZBrush for a specific professional task. Should be done in a couple a weeks now, maybe less :)

The thing is that every printer can't print smaller than a specific size (depending on the printer itself but min for example is 0.02mm) and some tolerance is needed depending of the quality of the resin and your settings as well so you still have to keep a minimum gap. The one by default here "0.2" is understand as millimeters which is pretty small but you can of course try to have less gap if you think it can work for you :) You should also try to place your cuts in a way we won't see them except in a very specific angle. Hope it's clear enough for you :)

Hi, I can't exactly tell since I don't know your setup but if it's crashing everytime that's probably mean something is wrong within your mesh so I would recommend you to watch another video on my channel that shows good habit to have kzbin.info/www/bejne/b3LPln2YbtyWepo If you can't resolve it after that, please use the Google form I have made for that (look at the PDF attach with the ZPlugin).

Hi Marlon, Actually you should not get any trouble with T-pose model but this feature is more effective if your character is oriented in front of the "basic" scene and with Y up. However you should be able to rotate quickly the cube if you are not in the correct orientation. Let me know if it's clear enough and if it solve the issue :)

Hi, It's work exactly like what you see in the canvas and most of keys features will disable folders while processing. I did many tests with folders and solved everything I found. Yes, it does play with Dynamic subdiv :) If you ever meet some troubles while using it let me know and I'll try to fix it as soon as possible but of course like every tools sometimes you need to follow a certain way of working to use it correctly but once again folder shouldn't create troubles :)

@@maximeforveille4663 That's great. I'm definitely going to get it. I work like this anyway, creating the cutter mesh with the measured gap manually, so this will save me so much time. Thank you 👍

@@maximeforveille4663 I paid for this and the file is missing a few things

@@rossnem1 Hi George, what kind of things are you talking about?

In my mind it's in mm but it's actually up to you. You should choose the unit you want in your mind and then you will set it with this unit when you will import your print into your slicer. If I am not clear enough, I have made a video a while ago about "understanding export settings" which isn't about this plug-in but it can help so feel free a look.

For personal projects there is no limitation.

@@maximeforveille4663I bought it and it's going very well friend, great job, I'll be attentive if you get another Zplugin

@@mariopernia4802 que me puedes decir de esto? como le va con este plugin?

Everything looks fine right know. I will prepare the video tutorial from tomorrow and a short documentation. Should be released on Friday I think ;)

Cool , thanks for getting back to me 👍

Still more fews days but all functionnalities has been add. Just need to try it more and more to be sure everything works everytime and I have to make videos tutorials. Should be out either at the end of this week or at the begining of the next one.

@@maximeforveille4663 great friend, I will be attentive to your channel

Should be before the end of this month.