3 жыл бұрын
Пікірлер
@geordiejohnson3287 19 күн бұрын
in england you need to use concreat padstone tha woul not pass builing control inspection
@Riachuelosurfer77 28 күн бұрын
Great Video!! Wonderful. Thanks for sharing!
@carmelpule8493 Ай бұрын
Surely if there was a ring beam, you did not need to do all that work with introducing the steel beams!. The ring beam would act as a lintel
@ifranebrunet9153 Ай бұрын
In 2024 the search for a fanless projector for a bedroom simple wall projector is still impossible. Google dont give anymore a f...about keyword and no one seem concerned by the noise.
@dennisodriscoll9435 Ай бұрын
That was a good video to watch for a DIY like my self
@glennfeldt_74 Ай бұрын
Some real idiotic comments being displayed here. First of all, this is not a professional home theater projector. Yes we are all aware of that, however you can mod a cheap Chinese projector into making it perform better. Noice is the biggest concern regarding these projectors making it less suitable for a quiet movie night. In my case I actually used a buck converter to LOWER the output of the LED and by that be able to reduce the speed of the fans without risking melting the lcd and lenses. In a darkened bedroom you don’t need the full power of the LED. I am super happy with my modded $150 projector and I don’t need a 4000k one. If you like tinkering this is what you do. If not, by all means buy an expensive one then. Great video👍🏻
@HeiderSati 2 ай бұрын
Probably the riskiest job I have ever seen, you guys were "lucky" that the ceiling didn't fall on you when you removed the props to install the beam... personally, I would never attempt to do this whatsoever.
@MyBobby1978 2 ай бұрын
Are you standing on a white plastic chair?
@stevemcilroy.62 2 ай бұрын
Wow, no strong boys? dangerous
@borutgoli840 2 ай бұрын
you shoul be baned from doing any construction work and you are lucky whole building did not colapsed.
@bbmoti 2 ай бұрын
great video
@Tarifawindsurf 3 ай бұрын
Totalmente. 🙈🙈🙈🙈
@to4us 3 ай бұрын
Thank you for this wonderfull video with all the needed information about how to do this. I do have one question: How much waterglass and soapstone powder did you use to glue back the whole stove?
@plutodeiplutis 4 ай бұрын
Guys, great work really!!!👏👏👏 A pleasure to watch it
@CarlsImprovements 4 ай бұрын
Thank you very much 👍
@lu1974is 4 ай бұрын
I have to the same on a house in Bamhoulder, Germany. How much will it cost to do this and does it require any permissions to do it?
@CarlsImprovements 4 ай бұрын
You will have to get a "Statische Berechnung" from the Statiker, to make Sure you have the right size beam, especially If ITS a load bearing wall, good luck with your project
@juan2.0.1 4 ай бұрын
Mi proyector tiene una abertura en la parte de abajo donde puedo limpiar el lcd y el polarizado y probe con un ventilador de 12v y uno de 5v y este último me funciona mejor xq le da el aire que nececita en cambio el de 12v la pantalla se oscurece ( le agregué un ventilador xq le había salido unas manchas amarillas y por ahora funciona bien
@carlosfreschi2143 5 ай бұрын
Não vi na de revolucionário na mudança. Apenas substituiu os ventiladores. Tinha que ser Brasileiro
@Ristake803 5 ай бұрын
its 1 am and I was hoping to fix my double typing key quickly. I was not expecting that soldering iron would be required :( itll have to wait
@CarlsImprovements 4 ай бұрын
Good luck, Hope you get it fixed
@simpletools6805 7 ай бұрын
Nice upgrade How is the cooling performance and long term reliability of this mod
@patty1086 7 ай бұрын
this is a joke you have done nothing to covert anything amazing this is so silly
@rafaelsanti7380 7 ай бұрын
Great , you are awesome dude
@CarlsImprovements 5 ай бұрын
glad if it helps
@cclambie 9 ай бұрын
The pad stones seemed rather small?
@CarlsImprovements 5 ай бұрын
maybe but both beams get theirs
@chmac 10 ай бұрын
Great video. Thanks. Nice trick with the bolts and the injection cement. Which country was this project in?
@CarlsImprovements 10 ай бұрын
this was in Germany, thank you and have a great day
@chmac 9 ай бұрын
@@CarlsImprovements Haha, I thought so! That's great, I'm renovating a building in Brandenburg which needs the chimneys repaired, and without speaking much German, it's hard to find content that is appropriate. Thanks.
@mariokirasic1317 10 ай бұрын
Great job, just a couple of questions. 1) How wide was the thickness of the wall? 2) how wide were the steel beams? (I think the height was 12Cm, not sure about the width) Thanks
@CarlsImprovements 10 ай бұрын
thank you, the wall is about 40cm, each beam was 12x12 cm, hope that helps and good luck
@mariokirasic1317 10 ай бұрын
@CarlsImprovements Great, thank you again. I will need a lot of luck. My wall is 50 cm and installing 2 beams. Each 22cn x 22Cm. Not sure how am I going to lift them lol
@shiroumxm2052 11 ай бұрын
i wonder if it is possible to fix irregular focus in these chinese projectors.. mine is great, but cant have the whole screen in focus..maybe replacing lenses
@DoubleMonoLR 5 ай бұрын
Make sure the projector is oriented 90 degrees to the whole in each direction first of all. eg: If the projector is tilted down, then the top projection distance is shorter than the bottom so they can't both be in focus without a special lens design.
@Qquilina 11 ай бұрын
Could you estimate the costs for this intervention?
@CarlsImprovements 11 ай бұрын
the cost for the two beams were 300$ at that time but that depends on the price of steel, the rest was maybe another 150$, this does not include any tools, thank you and good luck with your project
@Qquilina 11 ай бұрын
@@CarlsImprovements sounds great ! You did an amazing work! Thank you
@Qquilina 11 ай бұрын
@@CarlsImprovements also if I may ask .. the project of the structural engineering team costs ?
@scalpmates Жыл бұрын
Very in depth video, thank you very much! It filled in some information gaps for me. :)
@CarlsImprovements 11 ай бұрын
glad to hear the video helped you, you're welcome
@alexe610 Ай бұрын
@@CarlsImprovements At 26:50 "so it's back to grouting again " . Would you please tell us which kind of grouting should be used above the STEEL BEAM? Many Thank, from France.
@BSpence-y9b Жыл бұрын
Awesome work
@CarlsImprovements 11 ай бұрын
thank you
@Followme-k2e Жыл бұрын
I don’t have any display on my projector/ can anyone please help
@christossyrmaidis125 Жыл бұрын
....greetings from blue Greece......I got mine excelvan ehd 11 and need info for change the lamp,......worked 6 years excellent and blurred at the corner lately.......I "went in" with screwdriver and found a thin tablet of led lights....... QUESTION, how do I call this type of lamp to order a replacement???????.......(there was no description at all on the manual as well on the box.......) ... thank you for your precious time. ☆☆☆☆☆☆☆☆☆☆☆☆
@desideep.s Жыл бұрын
beautifully done, how long did it take from start to finish?
@samynet Жыл бұрын
1week
@CarlsImprovements 11 ай бұрын
thank you very much, yes it took about a week but that was the first time i did this all by myself and that also included filming
@lonnieosbourne818 Жыл бұрын
what about the smaller indicator lights..
@lpspiropulos Жыл бұрын
Excelente he aprendido muchísimo!!!! 😍😍😍😍😍😍🥰🥰🥰🥰🥰🥰🥰 Muchas gracias! Me encantó tu vídeo , hablas pausado y claro! Y demuestras en ellos que eres profesional y meticuloso! Me he suscripto porque TU LO VALES
@CarlsImprovements 11 ай бұрын
thank you very much, muy amable, gracias por subscription 👍🤗
@plutodeiplutis Жыл бұрын
Great, simply great! 👏
@CarlsImprovements Жыл бұрын
thank you
@hallo_welt1111 Жыл бұрын
Sehr gutes Video, unglaublich hohe Qualität in der Auswahl der Szenen, dem Schnitt und der Nachvertonung!
@CarlsImprovements Жыл бұрын
Vielen Dank!
@hallo_welt1111 Жыл бұрын
Amazing video!!
@CarlsImprovements Жыл бұрын
thank you, hope my video helped you
@shamkraffl6050 Жыл бұрын
How cant my mom let go of this garbage? such a depressing design.
@CarlsImprovements Жыл бұрын
lol
@ShankarGurjar-d8x Жыл бұрын
Mobile number send karo please
@bobbywinicher9080 Жыл бұрын
Is this like VERY specific to to a PC like EXACTLY like yours?
@CarlsImprovements Жыл бұрын
you can do this to most pcs
@gary24752 Жыл бұрын
Was a professional engineer required to be hired to engineer this?
@CarlsImprovements Жыл бұрын
i did it myself
@thomo74 Жыл бұрын
Great video! Just out of curiosity, is there a second story? Is that why steel was required? I want to do a similar thing but am supporting a roof, so hoping to get away with concrete lintels.
@cclambie 9 ай бұрын
Didn't look like a 2nd story did it. Worth asking a structural engineer to access for your project I would say
@1987Redfield Жыл бұрын
I just tried this today. The panel overheating, no matter what i do. The radiation fan give direct and stronger air, then the bequiet one.
@CarlsImprovements Жыл бұрын
thank you for the feedback
@DoubleMonoLR 5 ай бұрын
Any replacement fan will need to be able to move at least as much air, they're typically rated as ...CFM(cubic feet per minute) The air pressure rating may well also be important, or the fan may not be able to push enough air through despite the CFM rating.
@mikegrassi8959 Жыл бұрын
Hi,i bought a media dashboard similar like yours,I find your video is very helpful in assembling the dashboard, it looks very easy
@CarlsImprovements Жыл бұрын
im glad it helped, thank you
@eyesalooking Жыл бұрын
Thanks. I was looking for a way to repair my Kett Power Shears cord. It still works great but because of age the cord is deteriorating. I didn't want to take it apart without having some idea of what to expect. Now I need to find a replacement cord.
@CarlsImprovements Жыл бұрын
hope you were able to fix it
@nicpeeps Жыл бұрын
Question, so you cut out the entire wall, no need to support the wall over , just chased it out and slotted the beam in, I'm no engineer but that seems like a lot of potential load from above with no support
@idontgiveaship2575 Жыл бұрын
Exactly, he put some support in when hammering the bricks out and then he takes all the support away 😂. Didn't need to put back the supports afterwards, could also use a couple of wedges between the beam and brickwork. Actually that would be even better because wedges put some pre tension on the steel beam. But still: brave to take the supports away just after he made a big hole in the wall.
@nicpeeps Жыл бұрын
@@idontgiveaship2575 I've got a meter long walk I want to remove, taking external wall over, need to remove a steep and drop in a longer one, think I'll pay the experts for this one :)
@CarlsImprovements Жыл бұрын
the beams are there to have the wall not settle over time. if you do the opening without beams you will get big cracks above over time. usually for a very short time nothing happens. while chiseling i put the supports because of the vibration, i didnt want any bricks to get loose
@idontgiveaship2575 Жыл бұрын
@@CarlsImprovementsthat's not how it works. A wall is under a certain load, linear load also called. when a linear load is interrupted the load will spread to the remaining sections of the wall. This settling is not always noticable but can't be reversed.(you could push back with screw jacks or hydraulics but most likely cause some damage elsewhere) When we do a job like this(usually bigger beams under 3 or 4 floors) we put the beam infront of the props before we start demolition so we can leave the props in place when we put the beam in.
@RaduP3 Жыл бұрын
Bro this video inspired me so much and I came here to thank you . I have a very similar projector, chinese no name, but has a great LED 1080 projection. the only problem it has is that I changed it at warranty 3 times because of the fact that I got burnt spots on projection. So with this 3rd one I got, I watched your video, and contacted one of the electronists in my city to take the brand new exchanged projector and modify it to become a unique projector as well. And he did an amazing work just heard from him. The projector has 1 in and one out ventilators. He changed them both with better ones and added a 3rd one. Also, changed the position of some small pipes that are connected to the cooling system and put it on the exterior of the projector so that the heat remains further away from the more vulnerable parts. he also eased the main board, as everything went through it and was very hot because of this. he added a laptop charger extension, a separate one, to which he connected all the cooling system, alliviating the pressure on the main circuit, making it even "Colder" in the process. He also added the whole separate ventilation system a temporizator or something like that, it keeps on working for 10 minutes after I shut it down. He insisted on it, saying that it's a projector and when I put it into a position I do not need to bother it further. I think I found an amazing guy here, very cooperative and competent. And I have you to thank for inspiring me to finally do something about my projector that constantly breaks because I am in love with it and want to keep it, even if that means going old-school AF and modifying it into a unique piece. Thanks bro!
@CarlsImprovements Жыл бұрын
sounds good, thanks for the feedback, have a great day
@user-fo6rj6ud8q Жыл бұрын
Hi, is it not needed to create partitions when installing Windows?
@CarlsImprovements Жыл бұрын
if the drive is not big just use the whole drive as one partition, like i did
@stevenolivero5207 Жыл бұрын
Are the brick used to support the steel beam strong engineering brick as it looks like you used soft bricks that can crack and crush?
@CarlsImprovements Жыл бұрын
you are right, i could have put new concrete corner stones, thank you
@MikeAllenMountVernon Жыл бұрын
Thanks, this was very helpful.
@CarlsImprovements Жыл бұрын
im glad it helped
@warren7565 Жыл бұрын
I've found the device very average. If you plug in a hard drive you have to restart the PC. The card readers is very slow. Personally I would not by it again.
@superusermode Жыл бұрын
Check to see if your BIOS supports hot swapping. If so then enable it for that channel and you won't have to reboot when connecting or disconnecting a drive.