P o r t o f d a n d o n g

it self reported

Hello sir, pls contact our After-sales Support Mr. Lane, email: [email protected]. Thanks

I would like to buy some fermented garlic with at least 1100kj nutrition

@@nostro1940 An excellent choice! Very heeg kwoality!

It has passed the Europe certification

@@fake12396 Great success! It is legitimates with the certifying!

Hi there, Thank you for your kind attention to NeoDen. Please feel free to email me to get a quote at [email protected].

​@@neodensmtmachinecathy8259 contact num

its because of the camera, Neoden 4 does the above sizes but just about covers it. You can manually program it to pick larger components with camera off but you need to make sure your component registration is bang on.

Please note that this isnt accurate for super fine pitch chips, better placing by a rework station. The machine will get you there or there abouts but you will have to manually adjust a chip under magnification and then experiment with solder viscosity and flux to bring the component lined up on its pads as the solder heats up. We use Neoden 4 for placing chips

They are using 3d printed to cut costs. Weve just ordered this machine for prototyping and larger component placement for components higher than 7.5mm as this machine will accept, Neoden 4 doesnt and is fairly hopeless for components above 12mm reels in its feed system and doesnt accept aluminium caps as height is 5.5mm and wont go round the feed mechanism.

The max board dimension is 315*350 (mm)

The largest size of component is 18*18(mm). You're welcome to contact us for more details. Email: [email protected]

@@xiaxuanzhang9569 alright one more thing can I do mix placements of vision assisted and non-vision assisted for oversize parts like LQFP-112 which is 22mm..?

@@leisryan It supports both vision and non-vision. But for LQFP-112 (22mm), it's out of the Max data...

@@xiaxuanzhang9569 alright Can I somehow still try Placement of LQFP-112 fir Non-vision Assisted placement?

Hello, no more than $2899, if any interest, we could share more information with you. Joyce.

We have just ordered one and it was £2800 delivered to the UK so super good value for money really. Should take around 14 days to arrive.

@@lukehilton8225 Are you happy with the machine? I'm concerned about the repeatability because no fiducials are measured automatically. How about the calibration? Is it reliable? Is the assembly correct up to 0603, without an offset? Thanks!

@@smartelec nope, its shit, not intuitive or logical programming, weve used it once, The drag pin gets stuck so doesnt lift back up properly and repeatability is poor even on 0603. I wouldnt bother tbh. We will be selling it. We have the Neoden 4. Again doesnt do what it claims to do, feeders are temperamental, does do 8mm but anything above again doesnt feed through accurately, feeder depth is inadequate so will not do 5.4mm electrolytic, Also chucks components around too even at 0603. Definitely will not do 0201 accurately although Much more accurate and a good price for what it in its price range, but hard to setup as pigeon english manual and weve had to have constant support, doesnt do LQFP or Rasberry pi accurately so we are now sub contracting out until we build the business up and then will be investing £200k in an essemtec system which is a million miles away from anything chinese built. There is absolutely no way that Neoden 4 is a high quality production machine for modern electronics manufacture, its small batch, prototype, and you wouldnt make much money off them. Get around 40 boards a day with around 65 components per board max if that. YY1 likely around 20 maximum. Essemtec we have found are best in size and class at 1m x 1m and 1 head is faster than 4 heads on a neoden 4 for example and is 26 micron accuracy at high speed. Weve found you really do get what you pay for when picking SMD machines so we wont be touching anything Chinese until they get a firm grasp of modern programming setup and quality accurate workmanship on feeders. Id have rather paid an extra £10k to have saved myself the extra work they have caused.

How are you verified?

@@Purzify Have not tried that particular machine in real life yet, but know of some labs that use a previous version. This is much more compact and well suited for small runs. Speeding up the time from prototype to production. But as you mention, have not verified it in real life yet!

Hi sir, could you please leave your email address? Our email: [email protected] We'll send you the quote. You're also welcome to our website: www.neodentech.com for more details.