So this is 2 times 180 stitched with a visible stitching line towards the fridge? I really hate the way KZbin reprojects the footage so all straight lines in the floor become wobbly
@adapa3602 ай бұрын
Yes that is correct :) Must add that this was a quick test and the stitching could have been better, but we just wanted to see the grading and if KZbin would accept the 8K file..... doesn't seem it did since we can only see the 4K version so far.
@TomislavKiraly2 ай бұрын
@@adapa360 Hello. Whit what app did you stitch the video?
@adapa3602 ай бұрын
@@TomislavKiraly We are using good old KolorAVP, they are not in business anymore unfortunately.
@adapa3604 ай бұрын
Model here: skfb.ly/oQWNy
@dcheckley61007 ай бұрын
I like the colours, it looks quite film like, but the desqueezing is incorrect. its like its shot to 4:3 sensor then set to.133 desqueeze 4:3 has to go to 16:9 on this lens and 16:9 to 1.33 (roughly 2:39:1 anamorphic)
@JugsLife9 ай бұрын
What AI software specifically?
@adapa3608 ай бұрын
No AI software was used to create these 3D models 🙂 just a custom methodology for processing
@nicxonpiaso61999 ай бұрын
What's the drone used to capture this?
@adapa3609 ай бұрын
This was shot with a hand held camera 📸
@moravianlion31089 ай бұрын
Nice! Let's see Paul Allan's bridge!
@adapa3609 ай бұрын
Paul Allan? :D
@Lightning14329 ай бұрын
Nice bridge
@adapa3609 ай бұрын
Thank you very much! It is the foot of a bridge in Oslo as a test for optimizing our scanning workflow. More tests coming up!
@homeostasis3609 ай бұрын
What's this?
@adapa3609 ай бұрын
It is a test to scan in detail the foot of a bridge for inspection purposes.
@hughhou Жыл бұрын
The sample has lots of stitching artifacts. Top and Bottom exposure is not matching either. Do you know what is causing it? Do you know if it will be fixed? I think the stitch quality at least have to reach Sphere quality to make it usable.
@adapa36011 ай бұрын
The drone was facing down on the ground when we started recording.....rookie fail.....but we were more interested in the flight than the footage for this initial flight test :) better recording tests coming up :D The stitching was a quick solution in Insta360 Studio :) we can do better yes: here is from the last test with the Hawk23 v1 kzbin.info/www/bejne/inXFe4GFd5aGm9k
@SuperDunner Жыл бұрын
Thanks - Video proves the concept of the drone. The video is straight out of the camera without any post processing. Next I’d like to see the spec’s of the drone. Thank You .. .. 👍
@adapa36011 ай бұрын
Spec sheet will be provided shortly on our website adapa360.com/360vr-drones-povrig/
@SuperDunner11 ай бұрын
@@adapa360 Great - Look forward to it .. .. 👍
@SuperDunner Жыл бұрын
The video from the RS1 camera isn’t in 360. I’d really like to see what 360 looks like.
@adapa360 Жыл бұрын
Yes this was the first test and we are going to shoot new tests to upload the 360 version of the footage as well :)
@SuperDunner Жыл бұрын
@@adapa360 Excellent - I’ve an interest as I have the camera and fly drones. Thank You .. .. 👍
@adapa360 Жыл бұрын
@@SuperDunner Please check out the previous test here to get an understanding of the quality of the camera on our drones. kzbin.info/www/bejne/qZC5iWaJrZqrnqs
@ronananderson Жыл бұрын
Very interesting. Any updates in 2023 ?
@gamerul Жыл бұрын
This is impresive! Have you used 2 cameras at the same time to get the drone out of the shot in post? What accessories to grip de cameras on the drone?
@adapa360 Жыл бұрын
This footage was shot using our Hawk23, sporting a single insta360 1inch camera. 😎✌️ For more please check out Adapa360.com
@DC-cm3tg Жыл бұрын
How do you import video to 3d mesh
@adapa360 Жыл бұрын
It is a process we share with our drone users for rapid scanning :) If you are interested please order a drone on our website and we will be in touch. adapa360.com/360vr-drones-povrig/
@TunisieGuide360 Жыл бұрын
coooooooooooool
@adapa360 Жыл бұрын
Thank you 😃🙏🚀
@ContentForGood Жыл бұрын
Lets gooo! 😍
@adapa360 Жыл бұрын
Yeeeeeeeeeep ✌️😎🚀 good to GO!
@nicxonpiaso6199 Жыл бұрын
What's the software used to create 3D model ?
@adapa360 Жыл бұрын
That is a very good question :) But we can't share that at this moment unfortunately.
@andysillaber Жыл бұрын
very interessting - when available ? ... and which 360 Camera on it ?
@adapa360 Жыл бұрын
Thank you. It will be flying the Insta360 1 Inch
@andysillaber Жыл бұрын
@@adapa360 ...when will it be available ...andy any price....? thank you
@adapa360 Жыл бұрын
@@andysillaber hopefully it will be available by January 2023. We are still not sure about the price since it is still inn development.
@camexplora9742 Жыл бұрын
Hi, what settings and frame rate did you use?
@adapa360 Жыл бұрын
Frame rate is 30, ISO 100 but I don't remember shutter speed unfortunately.
@camexplora9742 Жыл бұрын
Thank you. Was the sharpness on medium or high?
@adapa360 Жыл бұрын
@@camexplora9742 It was on auto I believe..... so probably medium
@sheelalavan2150 Жыл бұрын
😑 ᎮᏒᎧᎷᎧᏕᎷ
@fabionunes360 Жыл бұрын
Incrível me mostra foto desse drone
@adapa360 Жыл бұрын
Gracias Fabio..... es aqui. facebook.com/adapa360/videos/1166909177570576
@eprohoda2 жыл бұрын
Adapa360,Woohoo.you created perfect ~ see oyu on my side,👐
@adapa3602 жыл бұрын
Thank you!! :D
@jerrygonzalez73082 жыл бұрын
Beautiful!! #1 view provider Promo-SM!!
@EZDiMEDiA2 жыл бұрын
Ezdixan 🙏
@DRAGenDROP2 жыл бұрын
Nice stitch line…
@DRAGenDROP2 жыл бұрын
8K?!, with all these color banding?!, pff wast of money
@samuelmimbs38852 жыл бұрын
There's no man on Mars in a spacesuit walking as if he's out for a Sunday walk.Dumb ass lies !
@vrguytokyo2 жыл бұрын
awesome
@user-fb2jx7vg1r2 жыл бұрын
Бог в помощь тебе планета Марс...❤️
@UniversalPioneer3 жыл бұрын
Very cool and impressive. The stich line is finally corrected and looks good. It would nice to see 8k and 4k edit.
@adapa3603 жыл бұрын
Thank you :) 8K files coming soon enough :) Thank you for following our development!
@loucosportrem3 жыл бұрын
Nossa é show, parabéns pelo seu canal, tenho também um canal sobre trens da rumo logística aqui de Araraquara sp, dá uma verificada no meu canal e prestigia
@trosencrantz3 жыл бұрын
Perhaps you can stabilize the footage a bit also, in post processing?
@adapa3603 жыл бұрын
Yes it is possible :) This was to show that the propellers are gone :)
@FlySoul3 жыл бұрын
Wow Hello my new friend. A very nice video. Keep it up 😉
@adapa3603 жыл бұрын
Thank you very much! :D
@Odysseyvisualmedia3 жыл бұрын
SPECTACULAR! Your content is amazing, cannot wait to test the drone!
@adapa3603 жыл бұрын
Thank you for the comment 😊
@tompoole0073 жыл бұрын
Great work. Well done.
@adapa360 Жыл бұрын
Cheers mate!
@ilya-art3 жыл бұрын
Phenomenal ;)
@adapa3603 жыл бұрын
Thank you very much!
@ruaneltonlepinski22744 жыл бұрын
Hello brother :) I'm starting in this world of 360, I bought SONY a7iii + sigma lens 8mm for canon + metabones 0.71x speedbooster. Do you think my configuration is correct? Thx.
@TropicalZooms4 жыл бұрын
Wow! I’ve never seen this type of vid before. 8K? I thought 4K was the highest. To be able to move the screen and see all the angles is incredible. I genuinely love watching and making similar drone vids too, and am also keen to sub and support each other if ok with you. My drone vid - kzbin.info/www/bejne/gp7VZ5-XlLtskM0. 😃👍.
@360reality74 жыл бұрын
Gopro4?
@adapa3604 жыл бұрын
No, not really.
@360reality74 жыл бұрын
Why you not use feather between 2 lense, when stitching?
@siakay6504 жыл бұрын
Wow Congratulations! Wondering, how many they selected for the second round and how many they will select at the final round.
@qrqaeb5z4 жыл бұрын
0:52 sweety-girls.online
@kazantip91034 жыл бұрын
kzbin.info/www/bejne/q3LNhGClrrOdqMk
@bophoto4 жыл бұрын
Thats pretty awesome
@adapa3604 жыл бұрын
Thanks Bo!
@fkrijoy56914 жыл бұрын
Proud of you my Eritrean bro
@flashgordon19484 жыл бұрын
180m with a 7 Hahahahaha downhill i make that with putter you dump
@sdgxj76234 жыл бұрын
Quite good image real film feeling
@adapa3604 жыл бұрын
And this is straight out from the camera, no grading or other adjustments 😀 Entaniya the lens provider now has a dedicated HAL220 lens with PL mount dedicated for high end video cameras.
@jedimaster755 жыл бұрын
Awesome tour of the facility, great and THANKS for sharing this!
@adapa3605 жыл бұрын
You are welcome and thank you for checking it out. If you would like to sign up for a similar collaboration please let us know.
@OfficialKGVisuals5 жыл бұрын
Adapa any chance you can give me your thoughts on my content and sub if you enjoy my vids, and if u could you let me know what I could do to make my content better, also really like your content! Keep up the good work