Amazing the results one can get, with a bit of imagination and willpower, without loads of expensive tools, well done, respect :) So many of the other guys..... have all the gear...... but..... no idea.
@GodsMan5003 ай бұрын
This guy takes insane risks on that table saw. If we are instructing on tool usage, we should always demonstrate impeccable safety practices because the noobs don't know what they don't know. All you need is one off-day, one distraction and your life will change forever. It's not a question of "if". It's a question of "when". You can get away with it for years and even decades, but that one off-day will come.
@joe_ocenas3 ай бұрын
I have been working with wood for 14 years and so far I still have all my fingers. Some shots are sped up, so it looks a bit reckless, but the basic safety rule is mainly knowing what I'm doing and focusing on it.
@GodsMan5003 ай бұрын
@@joe_ocenas I hear you, Joe, but what I found after 30 years of woodworking is that focus is a variable, since we are all human. I went 30 years without incident until one day I touched the blade at exactly the same time that it almost stopped rotating. I was shocked at my lapse in judgment. I’m always impeccable in safety measures yet that one day I came within 1 second of a serious injury , just because my mind was uncharacteristically distracted. I guess the point I want to make is that it’s always best to operate with the widest margin of error possible, just to gain that 1 second when it’s needed. It took me 30 years of a perfect record until I touched that blade. Just like with motorcycles, aviation, and other inherently dangerous activities, confidence can kill or maim. It’s the confidence itself that brings one to smaller and smaller margins of safety. You’re obviously a master at your craft ( I say that sincerely), but as the official Internet Safety Police, I think it’s not a bad idea for me remind the newer guys how hungry the table saw is and how instantaneously bad things can happen. Leave a wide, wide margin of error for that one bad day, guys.
@gregchulski6241Күн бұрын
@@GodsMan500anything with a blade is not prejudice
@travelwell80984 ай бұрын
I like the way your brain works! Thanks for sharing your ideas!
@MauriceCalis5 ай бұрын
Loved this video. Told the story well without words, beautiful design and execution….perfect music choice too. I’m just wondering what magnets you used, because I just did the same exact design, but the ⅝” neodymium magnets I ordered were not strong enough to hold the weight of the 2” hose (horizontally). Also, did those magnets stay in with just a pressure fit and no glue?
@orionmec5 ай бұрын
Damn dude, I have done what you show in the opening scene too many times!!!! Also, I really liked the music to listen to. I wonder why.... hahaha 🎶🎸
@IDEE55 ай бұрын
Thank you for showing us your work process in such a detailed manner. Great tutorial!
@user-vl8nn9gn6p6 ай бұрын
How tall is the base body wood and top layer when seperated?
@rogerdirkx.16796 ай бұрын
What strength magnets did you use? Thanks
@joe_ocenas6 ай бұрын
I used neodymium ones with a tear-off force of 10 kg,
@mitchd9497 ай бұрын
I'm not a guitar player but I appreciate fine instruments and woodworking projects! At 3:16 I can't help but look at the grain pattern and think to myself that I would have joined the far left to the far right. It wouldn't have been "book matched" but it would have been sort of a book match.
@user-vg9ui2do2z7 ай бұрын
браво!!!супер!!!!молодец!!!удачи тебе!!!
@kenord34377 ай бұрын
I love the magnetic coupling idea, well done and thank you.
@Rich322628 ай бұрын
I bought some from Amazon. They were $50. and were for the 2 1/2" hose for my router. If there was even a slight bend in the hose, it came disconnected. While I was attaching it to the hose, I dropped it and a piece broke off. Appears to be from a 3D printer. They were yellow if you see them there. Brand says Generic. I sent it back, useless. If they said they'd refund me and I could keep it, I wouldn't use it.
@joe_ocenas8 ай бұрын
stronger magnets are needed, I used neodymium ones with a tear-off force of 10 kg, a total of 30 kg...
@Rich322628 ай бұрын
I think they are neodymium. I just think it needs a couple more.
@garylarsen40388 ай бұрын
Really love your video and have subscribed to your channel! I don’t agree with all the concerns raised about watching your fingers etc. you captured the work piece and worked gradually to perfect your piece. Can you share more about the source of the magnets used and also the sealing tape? With your permission I would love to make some of these for my shop! Thanks for the video it is very informative!
@joe_ocenas8 ай бұрын
@@garylarsen4038 thank you, for sealing I used PVC tape for air ducts and the magnets are neodymium, diameter 15 mm x 6 mm,,, for 5 flanges the price is max 5 euros/usd if you have scraps from plywood
@reuelowen18 ай бұрын
Why do you use the cherry for the jack area? Thanks Reuel
@joe_ocenas8 ай бұрын
just design element from cherry wood
@binhosantosification9 ай бұрын
Hello, I would like to know the end of this work.😅
@MrSewt10 ай бұрын
that looks really dangerous. please don't use a tablesaw like that
@troyqueen95037 ай бұрын
You only get 9 chances 😅
@Chaosweaver-1 Жыл бұрын
Glad i never had to go through this. I just put my blank on the cnc and go do something else 😅
@tylkotel3273 Жыл бұрын
Widze ze na jednej z maszyn masz polskie napisy. Jesteś Polakiem?
@hanitraranaivo9220 Жыл бұрын
Great
@esmeraldo7887 Жыл бұрын
muy nice
@rickstrandberg6398 Жыл бұрын
Wow, that is a lot of work!
@gaborszepe Жыл бұрын
i hope u are fine dude, no more vids?
@brianniegocki2086 Жыл бұрын
Not the only custom designed finger remover on youtube, but may be a unique one. Genuinely sorry if there are hurt feelings, but please don't ever use a table saw this way. A spinning wheel that's designed very well to draw fingers directly into the blade. Very little margin for error
@fabianmuhlberger61539 ай бұрын
I thought the same. While it is ok to turn material into the blade (from a technical standpoint), the risk of getting your fingers drawn in is incredibly high. The only practical way to do this is, to turn the wood on the right side with an additional solid rest for the turning hand, so that it can't be pulled towards the blade.
@gatordontplay8161 Жыл бұрын
How’s it holding up?
@Mikey__R Жыл бұрын
Awesome!
@tinycuisine6544 Жыл бұрын
Great skill and patience! You take some extra steps that on the surface seem unnecessary, but make the end product look good and professional. That's a sign of a great craftsman.
@jamescopeland5358 Жыл бұрын
Great video
@sayedhassan846 Жыл бұрын
Awesome! did you use teflon tape to seal the pvc edges or what kind of tape was it?
@yannickbc Жыл бұрын
So sad there is no part 2...
@kabiashenderson4563 Жыл бұрын
I'm glad ya'll got these videos
@Robowx Жыл бұрын
This is exactly how I would want my thinline Tele routed.
@Robowx Жыл бұрын
Oh so you never did part 2. Hmmmm..........
@larsonbennett59032 жыл бұрын
Are the magnets slightly beneath the surface of the wood, slightly proud of the wood, or exactly even with the surface of the wood?
@joe_ocenas2 жыл бұрын
surface of the wood
@JesseJuup2 жыл бұрын
Thumbs up for this, hope you will be able to finish this project some day! 💪
@gXXrGoNe2 жыл бұрын
Curious what type of piping did you use as well as what size, looks like 4 in. but looking to confirm?
@joe_ocenas2 жыл бұрын
yes 4 in
@kerekes19522 жыл бұрын
Did you re-build the router sled after milling the body pieces? Looks like you changed the rails to rectangular metal. How did you fasten those down?
@joe_ocenas2 жыл бұрын
Aluminum profiles screwed on top, nothing more, nothing less
@kerekes19522 жыл бұрын
Do you have a part 2?
@kerekes19522 жыл бұрын
Joe, do you have a video of how you built that router sled? Thanks, Steve
@kevinhamm28192 жыл бұрын
All of that just to hold one table saw blade?
@macmaccourt2 жыл бұрын
*Chants: "WE WANT PART 2! WE WANT PART DOS! WE WANT PART DEUX! WE WANT PART 2!" please?
@JohnAdams-xc5yk2 жыл бұрын
Not in a hurry I see
@gesucristo10122 жыл бұрын
DOV'è il resto del video?? Volevo vederla finita questa chitarra!!!
@jedrasmussen29292 жыл бұрын
Awesome work mate quite inspirational.
@domingo37052 жыл бұрын
Niiiiiiiiiice. You really need P r o m o s m.
@morsetoujours13962 жыл бұрын
Great video, but please, mind your fingers
@joe_ocenas2 жыл бұрын
Thank you, of course safety is paramount. :)
@stanis.u2 жыл бұрын
Klasika nič...
@fxckyeahako2 жыл бұрын
where is second part?
@Jinnuksuk2 жыл бұрын
I guess a workshop build takes a helluva lot longer than a guitar build... I feel cheated being left at a cliffhanger but I guess the quality of your build will be well worth the wait. P.S. I have a guitar build I'm currently doing on my knees but I've ordered a table vise I will add to a mini workbench that I will need first for the more precise work so I get why a workshop is necessary. Can't wait to see your progress.