Second question: what do you use to degrease the bodywork before the base coat, is it isopropyl alcohol?
@LncPainter9 сағат бұрын
Degreaser onechoice sxa330 and isopropyl alcohol on edges and masking areas
@jean-marcheu742811 сағат бұрын
Thank you for once again satisfying us with your talent. I have a question: how long should we wait between each coat of clear varnish?
@LncPainter9 сағат бұрын
Thanks for watching. Between clear coats i wait until the first coat is Tacky to the touch, time depends on temperature and reducers being used, usually 5-7 min. I use onechoice sxa330 degreaser with a clean yellow microfiber towel (get the big pack at costco) i use isopropyl alcohol for all the edges and where i mask with tape so it sticks really good and I don’t get any overspray on the rest of the car! 😁👍🏻
@petermolnar8215 сағат бұрын
Andrew, the painting is stunning! I'd like to suggest a technique for the camera: could you please use a tripod or a magnetic arm more frequently to keep it stable? The camera moves quite a bit, and it might cause motion sickness for some viewers, especially those watching on a large TV. Thanks, and keep up the great work!
@LncPainter9 сағат бұрын
Absolutely, thank you for the advice 😁👍🏻
@FearrariDealerКүн бұрын
I've been painting for 47 years also specializing in high end vehicles like you, we both know there more than just mixing the Paint going in the booth painting the car and parts and the color match is spot on, every Ferrari color has variance's as does every Automotive brand today and some colors such as silvers and Grey's can have as many as 6-7 variants. So please tell me you do spray outside before finding the correct match, I've even had Factory mixed colors not match, there's so much that goes on behind the scenes that most people are unaware of. I use Sata guns and I'm curious to learn about your brand. You are an exceptional Painter and your due diligence is second to none! Keep up with your Awesome videos! 👌
@LncPainterКүн бұрын
You hit it right on the nail, most cars have 10-30 variants including pearl whites, silvers and grays but even black and solid white will have as many as 10-15 variants. I absolutely do sprayouts and keep a whole collection of them because I constantly turn back to them to them as we get those colors a lot. As far as paint matching and mixing, i have painted Mclaren and Ferrari with a Ford color that was easier to tint to make it match than factory color 😂. Ill never pull the car in the booth and throw paint on a car until i know the color and my sprayout match or at least blend-able. I will do a video on sprayouts and color matching 👍🏻😁
@joselnegrongonzalez3344Күн бұрын
Usted siempre sorprende con su profesionalismo.
@LncPainterКүн бұрын
Muchas gracias! 🙏🏻
@charly_rosarioКүн бұрын
Wow awsome job perfect finish so smooth!
@LncPainterКүн бұрын
Thank you, the new paint really makes it look like a new car! 😁👍🏻
@robertevans6481Күн бұрын
Very sweet
@LncPainterКүн бұрын
Thank you 🙏🏻
@robertcobb6404Күн бұрын
Great job as always!!!!
@LncPainterКүн бұрын
I appreciate that 👍🏻😁
@gilbertosantiago16582 күн бұрын
Professional job as always.
@LncPainter2 күн бұрын
Appreciate the compliment 🙏🏻
@johnthornley61682 күн бұрын
Awesome as usual. You have the right attitude. GOTTA get 100% coverage. If you were slack and the owner takes off the lower bumper cover, for example, and sees that the paint is poor, you'll get a bad verbal rep in minutes at the next cars and coffee...
@LncPainter2 күн бұрын
It’s always a good idea to go the extra mile to ensure a perfect finish! 🤘
@stevesmith8662 күн бұрын
LNC=FACTORY. Looks fantastic!
@LncPainter2 күн бұрын
Thanks 👍🏻😁🙏🏻
@stobsie2 күн бұрын
Andrei you never fail to impress.
@LncPainter2 күн бұрын
Thank you! 😁👍🏻 I appreciate the support 👊🏻
@aelaan122 күн бұрын
Magnificence
@LncPainter2 күн бұрын
Thanks 🙏🏻
@chappelltv28062 күн бұрын
You are an amazing painter. Appreciate you showing your skills and processes. Can I ask how you got started painting?
@LncPainter2 күн бұрын
Thanks, family business…always had issues with our painters, one day with no notice our painter decided to relocate so I stepped up, picked up a spraygun and have been spraying ever since! 👍🏻😁
@yanegar2 күн бұрын
Thats a ferrari paint job! Looks better than new! Love the wheels
@LncPainter2 күн бұрын
Thank you, yes the new wheels really set it off 😁👍🏻
@andreysolo-fw8gt2 күн бұрын
Great fantastic job, love the new wheels they pop 😁👍🏻
@LncPainter2 күн бұрын
Yes the new wheels really complete the look!
@Il-Siciliano2 күн бұрын
Your painting is, as always, exquisite. Beautiful car, beautiful color. And nice to see wheels other than black for a change - the finished car looks spectacular!
@LncPainter2 күн бұрын
Yea, we are changing away from black, hyper silver or polished look much more appealing and high end. Black look like hub caps
@WAYBACKist2 күн бұрын
Andrei, you have gifted hands
@LncPainter2 күн бұрын
Thank you very much 😁👍🏻
@jimmypratt64502 күн бұрын
Top quality products make a difference but the applicator has too be on his game and you sure are !!!! 👍Have you aiways worked in a controlled space ie booth or were your early years learning to do it the hard way , crappy little worshops like me and still doing the job 😓
@LncPainter2 күн бұрын
Yes, this is where i started 4 years ago. The spray booth is like 30 years old but still gets the job done. Luckily I didn’t have to paint outside the booth but if I needed to i would. 😁👍🏻
@danydany58492 күн бұрын
👏👏👏👏👏👏👏
@LncPainter2 күн бұрын
Thanks 😁👍🏻
@nathansee51042 күн бұрын
Andrei, you make it look so easy, but you also have high skill, quality equipment, booth and paint. Always a pleasure to watch you do what you do with the painting...
@LncPainter2 күн бұрын
Thank you! Appreciate the compliment, it takes time and a lot of practice. 👍🏻😁
@frankthieme87242 күн бұрын
Hello Andrey, top job for a beautiful car. 👌 Frank 🙋♂️ 🇩🇪
@LncPainter2 күн бұрын
Many thanks!
@stevejanka3612 күн бұрын
Good morning Andrey, beautiful hospital clean paint work. Thanks for another excellent video. Take care and good luck. Have a great Thanksgiving week.
@LncPainter2 күн бұрын
Thank you! Happy Thanksgiving 🦃
@FK-zr9fn2 күн бұрын
As always it’s such a pleasure watching you paint. The yellow just pops. I used to say that the only colour to have a Ferrari in would be the red,but after watching this that yellow runs a very close second 👍
@LncPainter2 күн бұрын
Yes my thoughts exactly! 😁👍🏻
@adrianhaynes33473 күн бұрын
Can I use factory pearl white and matte clear to get a pearl satin effect on my project? I really enjoy your videos
@LncPainter3 күн бұрын
Yea, you can apply matte clear over pearl or pretty my much any basecoat. I just choose to leave the pearl out, saves material cost and definitely time. Plus depending on the pearl it gives and offwhite color and usually when you do matte clear the metallics are lost and not visible, so the car almost looks solid white just not as snow white.
@LiamLucas-rp8wz6 күн бұрын
Were did you get the dynamic led head lights
@andreysolo-fw8gt6 күн бұрын
Link in description
@tst_tfue17987 күн бұрын
Paint code?
@LncPainter6 күн бұрын
NBA
@tst_tfue17986 күн бұрын
Thank bro🤝@@LncPainter
@jcshobbiesandrecreation58737 күн бұрын
Is that a Raptor with a widebody kit? That thing looks killer. I need to know who build that kit.
@LncPainter2 күн бұрын
Yes wide body, i believe its Fiberwerx…i am sure that more companies make it now
@arturikg57168 күн бұрын
Работа с металлом на высшем уровне , думал что будешь менять . Круто подбор цвета встык с передней дверью 👍
@LncPainter2 күн бұрын
Thank you 😁👍🏻
@CalinPlop-o8e8 күн бұрын
Professional work! How about the airbags, they did not deployed? The longerons have not been affected?
@LncPainter2 күн бұрын
No airbags deployed on this one ☝️
@thewiseguy35299 күн бұрын
It looks like you got in a wreck and that was the only bumper cover available. 🥴👍🏼
@LncPainter2 күн бұрын
It was an upgrade from plain bumper
@darrenboston3429 күн бұрын
Flawless Andre…..👊🔥
@LncPainter2 күн бұрын
Thank you 👍🏻😁
@mrdporter-y2g14 күн бұрын
What cap and needle nozzle is on the w400 gun is it the classic with the tulip tip or w400baleria that you have, and why is it out of all the spray guns you have that you seem to use the w400 spray gun for clear coat, is it possible that you could send me a picture of the cap and nozzle so i could try to order one
@LncPainter9 күн бұрын
I believe its 1.3 w400 original, not thr balerina. Send me an email so i can sent u photos. [email protected]
@mauag277714 күн бұрын
How You manage to upgrade the halogen headligths to LED ones?? You need to change something else to make they work?
@andreysolo-fw8gt14 күн бұрын
The ones i got were plug and play, no coding or anything required, link in description
@jonsvehla808516 күн бұрын
People that drive RAV4's are the worst drivers on the road.
@LncPainter9 күн бұрын
Sometimes, theres a lot of them out there 😂👍🏻
@warrenmorgan81817 күн бұрын
I like your attention to detail. Selecting cars without major structural damage is key to a quick repair. Attention to factory OEM is impressive. In UK inspection by dealers can increase the value significantly
@LncPainter9 күн бұрын
Thank you, yes not involving major structural issues is a plus 👍🏻😁
@johndeleon492218 күн бұрын
I always wondered why stir sticks were used instead of shaking! Thanks!
@LncPainter17 күн бұрын
Yup, water based paint likes to be stirred 😂👍🏻
@gilbertgarcia468724 күн бұрын
should have cleared the hole q-panel-- blend will not last,,but a nice blend
@jstsend602027 күн бұрын
will you ever mention the purchase price of this project car ? very curious
@LncPainter17 күн бұрын
Possibly, after the sale! 👍🏻😁 it is available for purchase… asking $300k
@ServedFastАй бұрын
Hey! Is there anyway i could send you my damaged rav4, and i will pay you to fix it? Dont have to film it, but thats cool too, i just need it fixed, similar but bit heavier damage! Let me know please
@LncPainterАй бұрын
Feel free to email me the details. Photos and damage. [email protected]
@Si_HanoАй бұрын
Aloha braddah Andrey. Nice table to have in your mancave!! That paint weight station is LIT_GIT too...🤣🤣🤣🤣 Hey, are you and Dr. Vlad going to SEMA this year?
@LncPainter17 күн бұрын
Hey, thanks for the input! We skipped out this year 🫣
@siefshloul3168Ай бұрын
why do you tell us how much it cost you to rebuilt it ??
@LncPainter17 күн бұрын
I spent about 3k for parts and repair, sold it for $15,900
@Alkamist4GamesАй бұрын
Gorgeous transformation and clean lines! Gave me some good ideas for my Tiggi
@LncPainter17 күн бұрын
Glad you liked it! Thanks 👍🏻
@danydany5849Ай бұрын
Wonderfull.... you are very goooood 👏👏👏
@LncPainter17 күн бұрын
Thanks a lot! 👍🏻😁
@OnlyyZsАй бұрын
Is this the same to the passion red nba
@LncPainterАй бұрын
Yea its NBA code
@OnlyyZsАй бұрын
@@LncPainter I got my car painted by a local shop and it comes out more sparkly instead of the deeper cherry red and they say they keep trying to tint it and can’t get it down
@NancyThomas-t4fАй бұрын
Giovani Lodge
@LncPainter17 күн бұрын
👍🏻😁
@okolepuka3134Ай бұрын
Tag team lnc videos genius
@LncPainterАй бұрын
Keep the entertainment going 😁👍🏻
@abbassirachid2004Ай бұрын
hello, the loom for the lighthouse is the same?
@LncPainterАй бұрын
Yes, it was plug and play 😁👍🏻
@abbassirachid2004Ай бұрын
@@LncPainter thanks bro
@CardroidАй бұрын
your daily driver came out nice! the smoked tail lights came out perfect!
@LncPainterАй бұрын
Thanks, i did medium tint. Lights are still very visible daytime and night time aswell 👍🏻😁