Transmission Line
0:07
Жыл бұрын
Gray hairstreak Butterfly
1:01
2 жыл бұрын
Takeoff from SLC
1:56
2 жыл бұрын
Folsom Lake Tour
10:16
3 жыл бұрын
Low Approaches and Crosswinds
11:33
3 жыл бұрын
Taking off and Landing
2:58
3 жыл бұрын
Thunderstorm
0:13
3 жыл бұрын
Piper Malibu Mirage TurboProp
0:55
4 жыл бұрын
North American AT-6 Texan Low pass
0:16
North American AT-6 Texan
1:20
4 жыл бұрын
Kwikset dead-bolt
0:28
5 жыл бұрын
Sunset in the back yard
0:11
6 жыл бұрын
Backyard timelapse in 5K
1:09
6 жыл бұрын
Downpour
0:15
6 жыл бұрын
Sunset
0:52
6 жыл бұрын
Rainy Pool Day
0:12
6 жыл бұрын
On The Rise
0:04
6 жыл бұрын
Drive shredder
0:31
6 жыл бұрын
Old Tool Cleanup -- Inside Dividers
9:43
GPS approach into KSJC
8:10
7 жыл бұрын
Potomac River Timelapse
0:26
7 жыл бұрын
North American AT-6 Texan
9:07
7 жыл бұрын
Пікірлер
@crazyhorsefarm1567
@crazyhorsefarm1567 15 күн бұрын
Excellent video! However, I have a 2021 Ram 3500 cab chassis that does not have the slow open string. Just open the glovebox and pull it off the hinges. There is a stop on the right side that needs to be worked through a slot to remove the glovebox.
@pascalThomine
@pascalThomine 28 күн бұрын
thx for your help.
@abh6967
@abh6967 Ай бұрын
I always wondered why they rub their wings
@kateknapp1843
@kateknapp1843 2 ай бұрын
Thanks for the straight forward presentation and well lit video.
@adampaulsen
@adampaulsen 2 ай бұрын
You’re welcome! I hate how-to videos that take 6 minutes to even get to the point!
@bradsunday
@bradsunday 3 ай бұрын
Thank you so much for a straight forward how to video.
@adampaulsen
@adampaulsen 3 ай бұрын
You’re welcome!
@tonysketch
@tonysketch 4 ай бұрын
To the point super fast. Wish girls were this easy😂
@crazykkid2000
@crazykkid2000 4 ай бұрын
Magic! Thank you!!
@adampaulsen
@adampaulsen 2 ай бұрын
You’re welcome!
@jpjp5901
@jpjp5901 4 ай бұрын
Thank you!! Hampton Inn limited to 68. Not anymore!!’
@baraksteady1341
@baraksteady1341 5 ай бұрын
Well theres 3 hours gained back in life. And 3 side missions discovering different tools i didnt bring with me to complete the job.
@angeltanguma6315
@angeltanguma6315 5 ай бұрын
I really enjoyed the video. Learned how to change my cabin filter for the first time.....thanks
@dman3487
@dman3487 5 ай бұрын
Thank you! No bullshit, just a simple how-to. The world needs more of this
@igla2187
@igla2187 8 ай бұрын
Thank you for sharing this view of the lake.
@linaguzman6784
@linaguzman6784 8 ай бұрын
Thank you SO much. I can’t believe I just did that.
@adampaulsen
@adampaulsen 8 ай бұрын
You’re so welcome! Good work!
@MarvR0914
@MarvR0914 9 ай бұрын
Thank you. Another video I watched did not recommend pulling on the 3 hinges at the bottom.
@adampaulsen
@adampaulsen 9 ай бұрын
You’re welcome! I’m glad the details were helpful!
@Sharksmatter
@Sharksmatter 9 ай бұрын
Thank you so much for this video. Very simple
@samgardner9879
@samgardner9879 10 ай бұрын
This video was literally perfect thank you sir
@djlucas7981
@djlucas7981 Жыл бұрын
Great video and even more impressive you did it with one hand lol
@adampaulsen
@adampaulsen Жыл бұрын
Thanks 😆
@tarnold7912
@tarnold7912 Жыл бұрын
Great video, thank you. Short and sweet with clear, simple instructions and no-nonsense or background music. Well done.
@bentbars9366
@bentbars9366 Жыл бұрын
Best how to video ever! Good lighting and straightforward. Thank you
@adampaulsen
@adampaulsen Жыл бұрын
You're very welcome! So often when you come across videos like this, you've got someone rambling for 5 minutes before they get into what needs to happen, and then the lighting sucks or the camera angle is bad so you can't even see what's going on. Or sometimes, assumptions are made about who's watching the video, and whole steps are skipped. I made sure when I got into this, that everything I was doing was going to be straight forward, and easy to understand.
@raiusdaltar1483
@raiusdaltar1483 Жыл бұрын
Thank you dude. I had a brake light go out so i paid a shop to change them both, gave them a pack of 2 bulbs. The guy only changed the one that was out, literally the next day, the other light went out (obviously). Was such a simple process after your video, wish I did it myself from the start.
@adampaulsen
@adampaulsen Жыл бұрын
You're very welcome! It makes me glad you were able to do it yourself! Good work!
@harryrichbell
@harryrichbell Жыл бұрын
Brilliant. Thank you.
@adampaulsen
@adampaulsen Жыл бұрын
You're quite welcome!
@pieterdebeenhouwer8952
@pieterdebeenhouwer8952 Жыл бұрын
Worked like a charm! Many thanks!
@adampaulsen
@adampaulsen Жыл бұрын
You're welcome! Glad it worked for you!
@marjouarjojo8185
@marjouarjojo8185 Жыл бұрын
What if when you were removing the bolts with the Alan wrench it dropped inside the car??? How do I get it out lol
@adampaulsen
@adampaulsen Жыл бұрын
Oh no! I'm sorry that happened to you! I'd probably grab a magnet on an extension from the autoparts store and try that!
@pawel900rr99
@pawel900rr99 Жыл бұрын
Awesome, thanks bud!
@adampaulsen
@adampaulsen Жыл бұрын
You’re welcome!
@stevenstiller1019
@stevenstiller1019 Жыл бұрын
Best thing ever thank u
@adampaulsen
@adampaulsen Жыл бұрын
You’re welcome! Glad you found it helpful.
@MatteoLC
@MatteoLC Жыл бұрын
Why make it easy when you can make it difficult and cumbersome? The European way, it seems... Thanks for the video - I'll be trying it when the bulbs arrive.
@adampaulsen
@adampaulsen Жыл бұрын
All things considered it's not that difficult, but if you don't have experience with this kind of thing, I can see why it would be intimidating. I hope you were able to get your bulbs changed out! :)
@meseahunt
@meseahunt Жыл бұрын
Good job thanks
@adampaulsen
@adampaulsen Жыл бұрын
Thanks and you’re welcome!
@happy.julie07
@happy.julie07 Жыл бұрын
Thank you !
@adampaulsen
@adampaulsen Жыл бұрын
You’re welcome! I’m glad you found it helpful!
@therandomguy4207
@therandomguy4207 Жыл бұрын
Really dumb design.
@adampaulsen
@adampaulsen Жыл бұрын
Hard to argue with that! :)
@holyrust
@holyrust Жыл бұрын
Thank you heaps. excellent instructions!
@adampaulsen
@adampaulsen Жыл бұрын
You’re very welcome! I’m happy you found the instructions helpful!
@ScytheSlayer1331
@ScytheSlayer1331 Жыл бұрын
Thank you so much every video i found just showed how to get the bulb out not the whole thing. So nice to have a straight forward video.
@adampaulsen
@adampaulsen Жыл бұрын
You’re very welcome!
@ScytheSlayer1331
@ScytheSlayer1331 Жыл бұрын
@@adampaulsen do you have anymore on the fiat 500L?? A lot of videos for this vehicle are outrageously long or they don't show the process correctly/fully.
@adampaulsen
@adampaulsen Жыл бұрын
@@ScytheSlayer1331 I don’t, but still have the vehicle. What sort of info are you looking for?
@ScytheSlayer1331
@ScytheSlayer1331 Жыл бұрын
@@adampaulsen honestly just anything on the vehicle. Almost every video that i find is drawn out, doesnt explain what you need for the repair or is cut short. Ive been trying to find one on how to properly change the thermostat in mine for months. Every video starts with them talking forever and then they just magically have the thing apart.
@Txhalfnote
@Txhalfnote Жыл бұрын
Worked like a charm and was very easy. Thank you
@steveashcraft718
@steveashcraft718 Жыл бұрын
Just did wife's 2018 500L. Be very careful removing tail light assembly. I broke the retaining clips for the chrome trim when I removed it. I got it back on hope it stays as this trim piece is expensive.
@adampaulsen
@adampaulsen Жыл бұрын
Thanks for the tip! Pinned your comment so others see it too!
@cyvenfx7271
@cyvenfx7271 Жыл бұрын
I second this, my left trim got ripped off in a touch car wash so keep that in mind as well 😂
@jannah4288
@jannah4288 25 күн бұрын
One of mine was broken too when replacing the bulb. Still have the 2 strips of blue tape holding it on. I really need to glue the piece back together and get rid of that blue tape, lol.
@steveashcraft718
@steveashcraft718 25 күн бұрын
@@jannah4288 , I ended up ordering the trim piece. Never grab it to remove the tail lights. I took a round file and enlarged the holes a little bit so tail light goes back in easier.
@miken8820
@miken8820 Жыл бұрын
Hey that was a perfect video. No fluff, right to the point, everything I needed to know, and just how to do it right. Even the important little details about the pins and whatnot. Excellent video
@adampaulsen
@adampaulsen Жыл бұрын
This is how I want the videos I watch to repair stuff to be! Thanks for the encouraging comment! 😀
@alicealice180
@alicealice180 Жыл бұрын
much needed! thanks!
@adampaulsen
@adampaulsen Жыл бұрын
You’re very welcome!
@MRcelica2
@MRcelica2 Жыл бұрын
Thank you, brother! Saved me the repair cost. Moreover, saved me from leaving the car at the dealership. Only one dealership here in Riyadh that can do the work, and they would take days to do something this simple. Funny enough, I replaced the left taillight, turned on the ignition and the "stop" light was still on. Turns out the right one was fried too! Ended up doing both sides. Total cost: 20sr ($5.33)
@adampaulsen
@adampaulsen Жыл бұрын
You're very welcome! I'm glad you found it helpful, and you were able to get everything back in order without spending a fortune! 😀
@nettineptune8125
@nettineptune8125 Жыл бұрын
Thank you 🙏
@theusher2893
@theusher2893 Жыл бұрын
Precisely what I needed. Chuckleheads at the auto shop wanted $90 to do this. Edit: make sure you get the right bulb. The bulb for the brake has two connectors at the base and the bulb for the turn signal only has one.
@adampaulsen
@adampaulsen Жыл бұрын
Oh yeah! Good tip! Glad I was able to help you save your hard earned money!
@steveashcraft718
@steveashcraft718 Жыл бұрын
Yep. 1157 won't work. European bulbs have a oval contacts on the base.
@theusher2893
@theusher2893 Жыл бұрын
@@steveashcraft718 Hard lesson 😆
@tadcollins6778
@tadcollins6778 2 жыл бұрын
Thanks Adam always appreciative of people that post this helpful stuff so we know what´s ahead
@adampaulsen
@adampaulsen Жыл бұрын
You're quite welcome! Glad it helped you!
@bennyhill3505
@bennyhill3505 2 жыл бұрын
Thanks. Whilst doing it is there anything that needs to be held, so it doesn't drop down into a crevice etc. Like the Allen bolt??
@adampaulsen
@adampaulsen Жыл бұрын
You'll want to make sure to hold onto those, and the only other thing that you need to be careful with is that small connector that I mentioned when removing the rear lightbulb housing.
@donb1183
@donb1183 2 жыл бұрын
The Allen wrench to remove the hex nuts was included in my Fiat 500L just under the rear cargo area along with the tire repair kit.
@coachdevie
@coachdevie 2 жыл бұрын
Merci
@superg4273
@superg4273 2 жыл бұрын
Thank you
@adampaulsen
@adampaulsen 2 жыл бұрын
You’re welcome!
@jasondanielian5265
@jasondanielian5265 2 жыл бұрын
I could not have replaced the #7528 (4445) Bulb on my wife's 2017 500L without your help! Thanks Brother!!
@adampaulsen
@adampaulsen 2 жыл бұрын
I'm so glad it helped! Responses like yours are why I made this video!
@dedalus1267
@dedalus1267 2 жыл бұрын
Saved me a trip to the shop! Thank you!
@adampaulsen
@adampaulsen 2 жыл бұрын
That’s what this is about! Glad I was able to help!
@adamandlorraine
@adamandlorraine 2 жыл бұрын
Thank you for this. All my previous cars this has been a tool free process. Silly fiat!
@adampaulsen
@adampaulsen Жыл бұрын
You're welcome!
@ArizonaLizardMan
@ArizonaLizardMan 2 жыл бұрын
They really didn't want to make it easy huh
@adampaulsen
@adampaulsen 2 жыл бұрын
Which is why I made this video. Hope it was helpful for you!
@ArizonaLizardMan
@ArizonaLizardMan 2 жыл бұрын
@@adampaulsen it was thank you!
@kimgonzo1561
@kimgonzo1561 2 жыл бұрын
I bought two bulbs, wish me luck
@adampaulsen
@adampaulsen 2 жыл бұрын
Good luck! I hope you succeeded!
@JaceisFTW
@JaceisFTW 2 жыл бұрын
Same make model and year! What coincidence, all thanks to you!
@adampaulsen
@adampaulsen 2 жыл бұрын
I’m glad it was helpful for you!
@ChristinaButlerEO
@ChristinaButlerEO 2 жыл бұрын
Lifesaver! Thank you so much!!
@adampaulsen
@adampaulsen 2 жыл бұрын
My pleasure!