Hey sorry to hear you're having trouble. I sold my truck a few years ago now so can't help, hopefully someone else Herr may read this and assist. Good luck

Glad it helped

I'm needing help with the hose fir the sad 3.7l v6

Rough idle can be caused by the pcv valve and that was my problem. For stalling out at idle it could be many things like egr valve, low fuel pressure or even a vacuum leak. I look at it this way, i dont have a car payment or mandatory servicing for warranty but all vehicles need maintenance so start with the cheapest part which you believe could be one of the issues and replace it. If it doesn't fix it then move to the next part. Keep a log of all things done and the mileage and that will help remind you what you have replaced incase one of those parts is a suggested fix for the next issue, then you know what not to replace on the next issue. Sorry i cant help much but perhaps check all your vaccum lines first to see if all connected or if you hear a hissing sound.

@jpeeps7346 ty for the tips man! Channel subbed!

I just changed air temperature sensor, and it appears to have somewhat fixed it, however now the check engine came on when it wasn't before lol.

@oilfieldman1209 thanks for the sub, i have been so busy and havent posted anything in a while but always want to help if i can. Lol, sounds like that song.... one thing leads to another... lol Do you have a scanner? I picked up one along time ago but if you dont have one, you shoud be able to put you key in the ignition and cycle to the accessory position 3 times and on the third time leave it in accessory and codes should come up in the odometer section. Then search the web for codes and start with the cheapest part as i mentioned before. Hope you get it figured!

Glad it helped

Yeah sometimes its just the little things hey, glad it worked for you

2 converters 4 sensors

​@@timothycolbert82 2 was on the hemi. The 4.7 has 1 cat

​@@timothycolbert82 2 cats were on the hemi starting in 04. 03 hemi has 1 cat

Glad it helped

Glad to hear, just one of those little things but makes a difference

You bet!!

You're welcome and glad it helped.

Diagram points to the throttle body check for something missing there

Look to the passenger side of the engine by the firewall, it should connect back there

@@jpeeps7346 i found it on by the drivers side firewall. But of a pain to get to but got it. appreciate the reply

@@ricardocastro1989you're welcome and sorry it was a late reply but glad you found it!

Glad it helped!

Any time

Glad it helped

Shortly after buying the truck, I was having some problems with rough idle and had evap codes so I changed it out as it's a super cheap part and I wanted to remove that from the equation. If you are not sure if yours was done or how long ago, it does t hurt. You getting certain codes come up or are you having specific issues?

@@jpeeps7346 hi my friend thanks for the answer. Nop sometimes but not very often I have lol rough idle but almost nothing. My problem now is... my truck smokes when I start to run. I mean if I'm completely stopped it does nothing. When I hit for first time the gas pedal IE in a red to green light smokes blue then stop. I was reading about pcv can cause that but I don't think it will do that

@@ScoreSCM no problem. I'm no mechanic at all but that would not be the pcv valve. This would indicate that oil is passing into the combustion, so perhaps the valve seals?? Have you pulled your plugs and taken a look at them and see if they are wet and what color they are (meaning are they black from oil). If this was me I would check my oil level and then add an oil additive that helps the valve seals etc. and see how that goes, I'd also check my spark plugs to see what valve are causing issues. Good luck!!

@@jpeeps7346 my spark plugs looks normal some use but still ok. I would try what you said. Valve seals additive. Let's see what happens thanks for the update my friend

Glad it helped!!

You're so welcome, it's such a finicky little part and I didnt find much on it so figured I'd do a video. Haven't had any other work to do but I may have to start doing more videos

Sorry man I honestly dont recall, totally forgot to mention but next time I'll have to remember as I know it'll help.

Thanks for the feedback, glad it helped

Me too😢😂

Glad it was helpful, there definitely isn't much correct info ut there on this little part

I think it’s different on some trucks. Some on the back and some on the front depending on engine and year

Flex fuel ones and I believe the durangos are on the back of the engine

Do you know the name of all the pcv valve but the tube to the back, and where to find it

Mario Montalvo I think you’re talking about the PCV hose. The only place I found one was on RockAuto, but it’s pretty cheap there.

Thanks Quincy

Edwin Benitez glad it was helpfull

surfing blackies I’m glad it was of help to you, I may start posting more things as they come up

You are most welcome and glad it benefitted someone. Not much of a KZbinr but I searched and Searched and couldn't find anything helpful. After tinkering I figured it out and then did it again for the video LOL. If you wanted to subscribe, I will post things I feel there isn't much info on or wrong info

Yeah I think not very people own a 2003 anymore lmfao that’s probably why hahaha

Lol, silly people.

@@jpeeps7346 quick question when you buy the new PCV valve at like O'Reilly's or whatever does it also come with that another tube to get rid of the old sludgy one

pokin pole so sorry for this super late reply, didn’t realize my notifications were off but the answer was not, we just got the pcv valve