Thanks for review! I just bought them recently couple months ago 225/65/16 for my FWD Hyundai Tucson, curious if they will be fine to drive in the harsh Canadian icy roads in winter with minus 30 celcium...a little worried if I need to purchase real winter tires or keep these ones
@JustPeaceLoveAndKindness3 күн бұрын
Did that really fix the problem permanently?
@Swudz7 күн бұрын
Got this exact problem, although the handle is loose to the point where the door isn't functional, have to open it from the inside. didn't know you can access the bolt from there and it's just a simple fix!Going to try this
@annamarieklups64999 күн бұрын
Love the wall! Great video great 💡 ideas! Thanks for sharing ❤
@sleepingwiththedog11 күн бұрын
I've been watching this video over and over to identify each switch by its FC number and the other number and also looking at the molded letters whether its NC or NO on the side of switch.so far theres FC-62 B6601B bottom door switch. FC-61 B6525B 3 wire on top and another FC-62 -31D28B two wires on top Also trying to get pictures of the color of the wire positions on the switchs.
@showtime495612 күн бұрын
Very helpful, any suggestions on the chain Link thickness as well…
@luzvilla435027 күн бұрын
Have Bravos XL How to fix LF make Error
@isabelalonsovite43027 күн бұрын
Hola bonita noche y en español x favor bendiciones
@georges643229 күн бұрын
My Whirlpool microwave looks similar, its like 4yrs old and it is definitely confused about the door status. Sometimes we take out the food and the microwave keeps giving the reminder beep as if it doesn't know I've already opened and closed the door. I'm going to use your method to change the switches. Great video!
@Chima4289Ай бұрын
Glad I found this video. Ordered ignition switch on Amazon, paid $20, it took me 10 minutes.., and its like never happened!!! Thanks a lot!👻🤝
@olveramelindaАй бұрын
Mine is clogged with rust specks
@DanielRLukeАй бұрын
DId you know that there is a much better design possible for transfer shovels? If you're interested, I'll show you a shovel which requires no back bending, and can be used with only one hand.
@jacobjones4488Ай бұрын
6:05 Sorry to point it out. I don't think the CV boot was the only thing that ripped. 😂 All joking aside, good video. I'm trying to get my passenger side CV axle out, and I am stuck on getting the inner side that connects into the tranny loose. I'm trying to do what I can to not damage the casing and oil seal.
@genocampbell905Ай бұрын
Mine is happening now on 2016 sonata… getting more frequent… some day just can’t push in brake pedal to start it but it does make that grinding noise and I thought same thing was it transmission
@TyrettoC.Ай бұрын
Awesome thanks for the heads up.😅😊😅😊😅😊
@abigaildiaz4433Ай бұрын
I would kiss you if I could omg thank you
@luckyloufishing6239Ай бұрын
Great video. Saved me from a pricey service call or replacing my unit.
@peggywilliams6399Ай бұрын
My problem was ice buildup behind the panel and a block of ice stopping the fan from running, and I have the kit (available online, which also includes that little probe that you clipped on) to add a secondary heater to prevent freezing. Letting it thaw overnight to see if there is an ice blockage in the drain. Thank you for the video.
@KKKKAAAARRRRYYYYNNАй бұрын
14mm long socket
@rasheedahaa9369Ай бұрын
Thank you!!!!
@NDWojАй бұрын
I f'd up the screws. 4 are longer and have some sort of bevel at the end. 2 are long no bevel and 2 are short. I know the short go on the outside...screwed up the other screws.
@kazutirudyАй бұрын
Thank you, Thank you, Thank you! You saved me hundreds of dollars and the aggravation of having to remove and replace my microwave. I have the exact same microwave and have had the same issue. The first time it happened a few weeks ago I unplugged it overnight and the next day it worked, so I figured it was a glitch in the electronics. This morning it happened again, but this time unplugging it had no effect whatsoever. My wife had me going out today to buy a new microwave, but before I did that I decided to check for a KZbin video to see if anyone had a simple fix for the problem. This was the first video that popped up. I used some degreaser spray on a paper towel, cleaned everything up, then wiped it all down with some rubbing alcohol on a paper towel. VOILA! Problem solved. Couple of things though....those aren't contacts at the bottom, they're clips to hold the stainless trim on the bottom of the door. I believe it is the bottom of the door that needs to make contact with the bottom of the microwave, so cleaning the entire bottom of the door and the bottom part of the microwave where the door makes contact is essential. Not criticizing your video....if it wasn't for your video I'd be out shopping another microwave. Thank you again sir!
@ninjamagical4146Ай бұрын
Brother, this video deserves so much more attention. I was scared for my transmission on my sonata 09
@moniquelee29042 ай бұрын
Thank you so much for posting this. I have the same exact microwave over my stove and was going crazy trying to figure this out😮
@thepuglady39312 ай бұрын
Thank you!!!! I have a Whirlpool but it looks like it works exactly the same way so this will be my project tomorrow morning!
@rkma2 ай бұрын
I am not going to absolutely dispute that the tabs at the bottom of the door are not contacts. But I just cleaned mine, and in the process, with the door already open, the inside light turned on, which suggested to me that the unit sensed that the door was now open. In other words, even with the door open before cleaning, the light was not on, mistakenly sensing that the door was closed. Once the light went on, I closed the door and tried the microwave, and the microwave worked.
@dracharya50372 ай бұрын
You can use 2 jam nuts if you have that size
@ltp91132 ай бұрын
Thank you so much for detailed information. Trailer and renting helps for me.
@kalla79422 ай бұрын
You saved my life
@locksmith5132 ай бұрын
THANK YOU THANK YOU THANK YOU,YOU SAVED ME ABOUT $130. AND THIS COST ME NOTHING, I FOUND THE SHELF BRACKET IN ONE OF MY JUNK DRAWERS AND IT WORK PERFECT AND DID NOY HAVE TO FILE IT DOWN, BUT I DID FILE THE TOP OF THE FRIDGE LIKE YOU SAID.THANKS AGAIN. BOB.
@BenjaminHickman-b2z2 ай бұрын
Brilliant idea
@stephenlynch31012 ай бұрын
Thank you for this tip. Cleaning it with some mild detergent did the trick and our Whirlpool Microwave is working again 🙌
@LeviBulger2 ай бұрын
You actually don't necessarily want to have both anchors at the same height. Unless the centerline is located equidistant to each stud,you typically want to make a delta calculation for your anchor screw locations. So if one atud is say 5 inches from center but the other stud is 11 inches away, you would do best to having one anchor lower than the other ao that they are having the same amount of gravitational force being applied to them. Something for others to keep in mind should they have studs that aren't the same distance from the center point of where you want your hanged object to be.
@inikolov72 ай бұрын
you have to be very carful using this option, I broke it and now I need to buy a new one.
@jessicaperlove47152 ай бұрын
Oh, this was cool. And i noticed that you made this 7 years ago. So your son should be like 14 now!
@PHOTOMAST12 ай бұрын
If you store a lot of uncovered or covered food in the freezer, in time this will cause moisture and freezing of the drip tray. I spent 5 hours solving this by removing the inner wall and defrosting it with a paint stripper. Water dispenser hose was also frozen. Next time I'll do it differently. If I go on holiday for a week or more, the freezer and refrigerator are empty, the power is turned off, the doors open and the fridge/freezer combination defrosts itself in a few days. At most a puddle of water at the back underneath, which evaporates automatically. When you get home, turn on the power and fill the refrigerator again. The two rubber hoses should be cleaned like in this video and dust should be removed once in a while.
@clayb.60772 ай бұрын
Thank you for making this video mine got worse and worse to where it did it all the time but like you said it's just a matter of cleaning it and it ends up starting working again thank you so much
@michaelp14962 ай бұрын
Thank you for making this super helpful video! I have had this same problem with my 2007 Hyundai Elantra for the last two months. The grinding noise in Park or Neutral happened only occasionally at first, then more and more often. I took the car to my mechanic and the noise didn’t happen for him, so he couldn’t diagnose it. Sometimes the engine starts when the key is in the “On” position, so I’m thinking to disconnect the battery terminal before I attempt this replacement for that reason.
@bethanyherrera39892 ай бұрын
Thank you! I didn't have that piece of hardware so I used a screw eye from a picture hanging kit! Thanks for the inspiration! Lol! Now I'm making a sign to not slam.the door!
@austinhernandez27163 ай бұрын
My dad and I did it almost the exact same way. Others sag removed the lower control arm but we didn't have the tools to do that so we did what you did instead. It was a learning experience but we got it done. The only hard part was removing the axle nut. It was extremely tight. I got a 2ft breaker bar and torched the nut for a few minutes and that finally worked. The old axle pulled out and the new one slid right into place and now it's driving back to normal.
@whitetiger86523 ай бұрын
Thank you. I have a whirlpool and when the door closes where the 2 pieces behind the handle go in when the door closes the top one broke and now the door is not tight. Can I buy replacements? looked like they are plastic and probably fatigued from repeated opening and closing the door over the years.
@michaelwoods44953 ай бұрын
Cure? I didn't know it was sick!
@jessedorsettii99883 ай бұрын
From looking briefly at this video at some parts, all I can say is I hope you have good fire insurance.
@l0ckew00d93 ай бұрын
My man! Watched like 7 videos trying to figure out why I couldn't cut nothing lol. Bought new chains and everything, and still no luck. Stumbled across your video and now I'm tearing through trees like tissue paper. Simple, but needed and every other video I watched overlooked this. Thanks!! 👍🙏
@KevinHodge-my9qq3 ай бұрын
Thank you for this. Solved the issue for me.
@sburger16853 ай бұрын
We have a roof that is twenty-two years old. Double layer. No problems.
@doveboyz8573 ай бұрын
❤
@TalesFromtheMutiny3 ай бұрын
You're a life saver! Our fridge is only 2 years old and that silly piece broke off completely. The replacement looks to be about $170 now. Thankfully, I found your video (via Reddit). I'm so grateful!!!