2 ай бұрын
2 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@Edwin572 2 күн бұрын
I would love to get on the bench after Barry and play this beautiful Christie Theatre Organ.
@Edwin572 4 күн бұрын
You play this Theatre Organ beautifully. Who would like to get on the bench after you and play it? I would!
@lynnegordon5286 Ай бұрын
Good info for newbies....many thanks, learned a lot.
@barryBJM 10 күн бұрын
You are welcome!
@SimpleSlowRoad Ай бұрын
😮 amazing playing Barry. Just beautiful. Thankyou ❤
@barryBJM Ай бұрын
You unwind the large air hose and insert it into the orifice which sucks air. Use the various supplied adaptors to connect that hose to the item to be deflated. Switch the rocker switch to the left and the motor will suck air through the tube.
@benc8167 Ай бұрын
How do I use the deflator?
@DavidJohns91039 Ай бұрын
Do You know the history of this organ? David
@robinroper Ай бұрын
Hope you get the broken solo chrysoglott tab replaced soon! Lovely playing and great sounding instrument
@barryBJM Ай бұрын
Thanks a lot for your nice comments.
@angelsone-five7912 Ай бұрын
Beautiful WurliTzer.
@utah880 2 ай бұрын
Ever the brilliant BJM!! Well done 🎶
@aidenmustafa1621 2 ай бұрын
Yas Bazza! WOW look how cute those geese are!!!! 😍😍😍
@antontsau 2 ай бұрын
Usual solution for fridge, ac, kettle, compressor and other special loads is separate transfer switch(es). At least one, with clear label "do you know what are you doing?" and annoying indication outside of cupboard. So general network reconnects usual way, fridge (small but permanent load), ac (significant power long term) and kettle (very big power but short term) go to this 2nd switch, with light flashing to remember about inverter. And, of course, the best solution is some smart automation with programmable relay controller, discharge sensors, built in timers and so on, but it will be black voodoo for you.
@barryBJM 2 ай бұрын
all good points. However there's nothing that pricks one's memory as efficient as that first time one forgets, to then face totally flat batteries. From then on one is acutely aware of the need to eliminate accidental drain on the inverter. As you say there are a number of ways and warning devices perhaps, available to warn someone to switch off Fridge and HWS. I haven't bothered. And it all works fine and has done so for many years now. You mentioned the battery charger. The original modification by the licensed electrician somehow bypassed the battery charger which will only be powered up by a proper mains input, fortunately.
@antontsau 2 ай бұрын
@@barryBJM charger meant not main battery charger (its of course connected to mains/generator input directly, never to inverter) but auxilliary, for boat, bike, mobile power station or so battery.
@spansinspain 2 ай бұрын
When you outline the compromises with using an inverter, I sway more towards an independent 2.5kw power station under the table to power my kettle, toaster, missus hairdryer etc, plus it acts as a great back up should things go tits up. Thanks for the video Barry👍🏼
@antontsau 2 ай бұрын
Its Chinese watts. To power 10A equipment like kettle you need at least 4kva invertor with 400ah batteries min, as its 200A 12v - small battery will boil and decay faster than discharge. Best way is 3 or 4 agm deep cycle batteries, $300 each. Not lithium, too risky without complex integrated bms.
@sienygavin8436 2 ай бұрын
Thanks Barry. I plug my inverter directly into the shore power socket with a short lead. I switch off the battery 240volt charger with a Bluetooth switch on its gpo..
@barryBJM 2 ай бұрын
Yes that of course is the simplest way. It's a messing about way, compared to a wired flip up or flip down switch. Done in 1.2 seconds or less. We don't have an AES ( auto selection ) fridge but those that do will need to always manually switch off the fridges mains power ( be it 110 v or 240v etc in whatever country) and likewise switch off any mains power to a hot water system. Your blue tooth setup sound good but probably beyond the average RVer. And requiring constant access with ones smart phone.
@KingE153 3 ай бұрын
Thank you I didn’t know how to use my thing and I needed to get to school in 15 minutes
@DjKayD 4 ай бұрын
Great video thanks, I thought there was some space under my MH seats !
@tigerlilysmials 4 ай бұрын
I love mine! Thanks Barry, trauma saved.
@DavidTucker-n1y 6 ай бұрын
Thanks
@SueBaker-rf7kg 7 ай бұрын
Finding your videos helpful thanks Barry, but cannot see how the lock engages. Have you cut a slot in the plastic on the side of the cowl? Also, how long is the barrel of the lock?
@barryBJM 7 ай бұрын
Thanks for your comments. The barrel lock ( or shed lock) had a L shaped tongue. I didn't want to mess with the grill work on the cowl itself so i worked out where would be the best position, given the arc of the movement. I had to remove a short section of the centre molding of the cover itself (you can see that in the video). I was working towards marketing a simple DIY lock kit. However the lock itself which was from a garden shed had a short enough barrel but i then wasn't able to source any lock barrels with shorter bodies. So I went no further. However I have now sourced (hopefully) a reliable source. However the tongue is now a flat bar which would now mean some major rehashing of the fixed cowl. This takes it away from the simple DIY purpose I had in mind.
@SueBaker-rf7kg 7 ай бұрын
@barryBJM Thank you very much for your prompt reply Barry. It's pretty much what we've found, will have to give the problem some more thought.
@barryBJM 8 ай бұрын
Hello, and thankyou for your interest in my you tube clip. The gas strut is a standard strut to fit the distance for normal door operation. The success of my device is due to there being a sliding movable base for that strut. There is a pinch cam device which locks the base where it normally is for standard 90° door operation. Then once the pinch cam is released, the 'floating' fixing point of the strut, can slide in the C channel to allow the door to fully open. It's my own design and the result of quite a few prototypes I made.
@nevillebrianmcmaster5918 8 ай бұрын
HELLO COULD YOU PLEASE TELL ME WHAT IS THE CORECT NAME FOR THE GAS STRUT YOU USE . I THANK YOU
@makamak4992 9 ай бұрын
Brilliant 👏 imma go do that
@fajarastanaprima2771 10 ай бұрын
1) buy AWD
@barryBJM 10 ай бұрын
if you can recommend a similar motorhome with AWD please let the world know. As far as we know there’s no such thing.
@jrzzrj 10 ай бұрын
👍.....𝕋𝕐...Great sound, great set up.
@barryBJM 10 ай бұрын
Thank you kindly! The yamaha H2 was a stop gap whilst I restored by 3-manual Conn with midi conversion into a Virtual Pipe Organ ( same software as . Here’s the finished product. kzbin.info/www/bejne/eWm1i62Vop2tf7Msi=S0K7dQXISd2dcOpM
@jrzzrj 10 ай бұрын
👍....I have the software for the 320 but nothing to apply it to....
@barryBJM 10 ай бұрын
Initially I used a Yamaha HC-2 electronic organ which has midi I had a Casio 61 note Keyboard and added a ply base with felt in between to put it on top of the existing two 49 note manuals. Might need a wedge here or there to keep it even and level. It all came together easily and here’s a video of that configuration using the Hauptwerk 320 wurlitzer sounds. kzbin.info/www/bejne/aIO8nWSBba14n6Msi=JOA9739kGDJtcwGe
@stephenabbot7905 10 ай бұрын
Great job,and sounds great,we recently replaced our Conn651 which we had from new here and replaced it with a Allen ADC4600 credit to you.4gds from Steve&Theresa Rainham Essex England
@barryBJM 10 ай бұрын
Thankyou for you kind comments. I love the Allen. A friend has 10 organs in his home ( plus 13 big Leslie’s)!! Several are VPO’s and 3 manual full PB. But he has a white Allen 3 manual, full 32 note pedal board, and ‘trash trays which pull out. I love playing it. No wife! No wonder! Cheers
@garyedwards8142 10 ай бұрын
Wow, a fantastic restoration and beautiful looking organ played by a master… 🇬🇧👍
@barryBJM 10 ай бұрын
Thank you! Nice generous comments! Cheers
@pf1468 10 ай бұрын
yep thank Barry used your temp. fix
@OlafIwersen 10 ай бұрын
Bravo ❤❤
@angelsone-five7912 10 ай бұрын
That is excellent, I envy you.
@sandrasherritt9708 10 ай бұрын
So SO SO THRILLING. Thank you!
@barryBJM 10 ай бұрын
Glad you enjoyed it! It was a labour of love fixing it and restoring it.
@utah880 10 ай бұрын
Incredible talent
@barryBJM 10 ай бұрын
thank you kind Sir!
@russellgodebye3873 Жыл бұрын
Same here Barry. I was unsure which way and how much force on the clips. Loved the "Knackered" description!
@komkommerskomk1775 Жыл бұрын
Great job sir! ❤️🇳🇱🇺🇸 🇬🇧
@pianodon Жыл бұрын
Hey Barry. Excellent playing. Great improvising. And your mother loved you playing for her.
@barryBJM Жыл бұрын
Hello again pianoDon Yes mum did enjoy. She’s actually an organist herself and still plays but not often as she’s now 99.
@barryBJM Жыл бұрын
check out this link to my VPO now with 3rd manual. kzbin.info/www/bejne/aIO8nWSBba14n6Msi=RMGzNIDv_x2aVEfh
@pianodon Жыл бұрын
Really, really nice. At the beginning, I thought you got an amazing theater sound out of that little Yamaha. Then I realized, you were actually playing Hauptwerk! What a trick. And you played it very well. Your style is extremely enjoyable. I can send you a photo of my HAUPTWERK set up. I use a Yamaha HX with an added third keyboard. I love Hauptwerk.
@barryBJM Жыл бұрын
Thankyou piano Don. Yes you’re correct. H4 with the Paramount 320 Wurlitzer . On a Yamaha HC-2 electone Since this video, i’ve added a Casio 61 note keyboard and now can play the 320 using 3 keyboards. Fantastic program eh? I’m actually doing up a Conn 650 saved from going to the dump. It’s all midified now and this is the software the ‘Conn’ VPO has been using. I’m converting it to Antique white panelling with timber painted gold scrolls and strips. Subscribe and click the little notification bell because I am doing a progress video which i’ll post. And yes I would be interested in seeing your VPO. Cheers Barry
@pianodon Жыл бұрын
Barry, im a new fan from Dallas. Tell me about your pedal bass! What is it!?! Brand? Model?
@barryBJM Жыл бұрын
I’m using an old analogue Yamaha pedal board from a YC 45D combo organ - released in Australia in about 1971/2. I owned it for about 29 years and was sorry to have ever sold it. So I went on the hunt for another or just the bass pedals - as they originally sold as an option to the YC45D After about 6 months I got lucky. An electronics friend who made his own VPO, agreed to midify my pedals as a paid job- ( he earns his living from electronics repairs. ) Then I plugged them into my disused Roland Sound Canvas SC155 module. It’s output goes to a sub ( as it’s only bass I need) Choose from any of the midi modules 190 odd sounds ( although essentially only the bass guitars, slap bass and so on.) Glad you like it. I formed a piano trio with Me, me, and a drummer. ( we play now and then at our lifestyle resort. There’s a KZbin video there somewhere on it.
@richarddunstone6093 Жыл бұрын
Another thing to look out for - the scuttle panel is held in place by a few screws and ten plastic clips which shatter when you remove the panel. If you ever have a windscreen replaced they'll replace the screws but won't replace the clips (they're a special Fiat part that no-one is going to have to hand, they're expensive, and windscreen fitters don't realise they're important). Without the clips, the panel won't sit against the glass and it will be hard to seal.
@barryBJM Жыл бұрын
thankyou Richard. Good points. Even with those clips, it’s hard to see how plastic against glass could possibly keep water out. It needs a rubber or neoprene gasket between the two. That’s why I favour something like sikaflex.
@richarddunstone6093 Жыл бұрын
Agreed. With advice from my local hardware store, I ended up using Sikaflex EBT+. It's a polyurathane goo, sticks well and stays very flexible. It looks good so far. Without the clips, I could put my fingers between the scuttle and glass, I don't think the EBT+ could have held it in place on its own.
@robertoduranos5196 Жыл бұрын
I was planning on removing my scuttle but now youve mentioned the breaking clips i might just leave it in place. I originally wanted to seal behind it against the glass. We shouldnt be having this years old problem, my van is 18 months old and still has this problem.. Thanks for the info
@richarddunstone6093 Жыл бұрын
@@robertoduranos5196I've heard of people just sealing along the joint between the plastic and glass and being happy with the results. You might be able to lift the rubbery edge and squeeze sealant into the gap. I was happier to remove the scuttle, clean it and reassemble with sealant, since my clips were already wrecked. I've also read comments that the scuttle is originally sealed to the glass with an adhesive foam strip, but I've never seen any evidence of that. If your van is so new and doesn't have the foam seal I'm starting to think it's a myth.
@TheSmallRabbit Жыл бұрын
Good advice. I have a 2019 Ducato and still the same issues. So I have built a deflector under the bonnet to stop any water going onto the engine cover. Also I use ACF50 a product that was developed for the Aircraft industry to kill corrosion and repel moisture. It stays active much better than a thinner WD40 type of product. Its a little more expensive but will stop any corrosion and kill any that has started due to this hidden danger :-) p.s ACf50 is mostly sold in Motorbike shops as they use this to protect their chrome. Also the water dripping onto the engine cover comes from the drainage rubber pipe above the cover ! Its just a very poor design with water flowing down a rubber pipe towards a female - male connector ! like that's going to not leak .... So mostly on the later model 2018 onwards its the rubber pipe that is carrying the water to the underside drain that drips. Hence like I say I have added more coverage to stop this and also I have tried to limit the water that drips out of this pipe. Its mostly dry now and protected by ACF50. www.sportsbikeshop.co.uk/motorcycle_parts/content_prod/339233
@barryBJM Жыл бұрын
Thankyou Billz I’ve played friends H7 450’s in a three keyboard console. Found it a bit disconcerting to have 4 manual organ allocated to 3 manual keyer. For example when playing solo keyboard and only wanting solo sounds there’s be a number of great or choir sounds mixed in I found a way to instantly disconnect either or the great and solo. Just click on or if a touch screen, touch the small label name for that keyboard, on the software display, and it turns off or cancels the keyboard you don’t want. It can be assigned to a tab or a piston control so it’s easy to do All the best in your endeavors
@billz4071 Жыл бұрын
I enjoyed the playing very much! I have the Wurlitzer 310 so far. I'm considering going to either the 3/31 or the 450. Not sure yet. I would also like the 320 upgrade to mine. I am currently running HW4, but I just built a system for a church and use HW7 on that one. I'm sold on the upgrade!! Now, of course, it's HW8. I have a couple other churches interested in getting Hauptwerk systems installed and I am working on those people also. My instrument in my home is inside a Rodgers 33E console which has been gutted and tossed into landfill a few years ago now. I have a Focusrite 18i20 digital to analog interface and have 10 channels with a 150W 15" Subwoofer, making it a 10.1 system. My HW4 organ uses four Alesis reverb units on it. (I can't wait to get mine to HW8 now.) I like the Alesis units except for the silver plated reverb switch. It oxidizes badly after a while and a pain to pull the unit apart to clean the contacts on that 'nearly sealed' assembly. I also have had to replace the electrolytics in them also because they do go bad. Otherwise it's a great system. Best to you on your building Hauptwerk your system!
@angler181 Жыл бұрын
I've heard of the problems, but your video not only clarifies the problems, but shows people how to fix them. What a brilliant video. Your efforts to help others are much appreciated. Cheers
@barryBJM Жыл бұрын
Glad it helped. thank you for your comments
@aidenmustafa1621 Жыл бұрын
Great Vid Barry! Peace & love!
@barryBJM Жыл бұрын
Thankyou
@StephenStewartSydney Жыл бұрын
I reckon that age is a factor, as is not keeping the RV mobile more often in sitting around could be bad for them. We have had two blow-outs on the drivers side rear duals on each of our last trips. I carry two hydraulic jacks and a Makita impact wrench to help make it as easy as possible.
@ElioModesto Жыл бұрын
Muito bom
@NimolEak Жыл бұрын
Hello , where do you buy that tool and that lock and made is please ? Are they all from bunning Australia?
@barryBJM 7 ай бұрын
None from Bunnings. I make the removal tool myself. I've got an even better model now which is in demand. It sells for $20 posted to anywhere in Australia. I call it the trauma-saver tool. PM me for details. or email [email protected]
@markdungey8008 Жыл бұрын
used this method in sand last weekend
@man.i.literally.failed6772 Жыл бұрын
Best thing I did was put 1.5 laps of tape on the sink mixer connections, they say not to use tape but when I got my new van everything was leaking, now it's not, and I'm also not a fan of connecting main hose to the van. I carry about 3m of each hose color, and have a emergency kit ( cost me $160) with all types of clamps and fittings.
@barryBJM Жыл бұрын
Great sound. Hank Marvin would be envious! um.. perhaps not!
@Senna-xi1gr Жыл бұрын
Good on ya Barry cheers.