Been looking for months of a way to print over foil, is theee a printer that can do this that takes sheets not rolls? Thanks!
@user-uf8ix2yx1i3 күн бұрын
Great tutorials
@user-uf8ix2yx1i3 күн бұрын
How to ungroup images
@uscuttervideos2 күн бұрын
If the image is already vectorized you just need to select the item and press Control and U at the same time to ungroup the objects. pressing Control and G will group them back together.
@user-uf8ix2yx1i2 күн бұрын
@@uscuttervideos thank you so much needed that info
@user-Jeneseshaus12 күн бұрын
Where can I buy this foul
@user-Jeneseshaus12 күн бұрын
Foil
@prosperity.13 күн бұрын
Hi, I'm looking for permanent vinyl to place on glass they will be warm to the touch, "glass door dryer" I believe 751 would do the job? and just trying to decide what would be recommended ? regarding transfer tape Paper type 592U or Plastic 1320 the design is a large circle shape. Thank you I hope to hear back from you
@trdsport26 күн бұрын
Why do you waste so much transfer paper on one cut. Can’t imagine how much is wasted after one work week. I love to save when able to sry 😅
@trevorgiant918129 күн бұрын
I think I'm going for this one!
@agguilarmetalwork4494Ай бұрын
Thank you is this working on 2024 ?
@natashacarman6328Ай бұрын
In the software can you increase the size of the viewing area where your current projects are, above the file selection area? You can only see the current project not the other ones you have ripped but not printed.
@brasilprinting4055Ай бұрын
The Machine prints good but the Utility is a nightmare. It gets frozen and there is no way to find out what is going on. No error message, no help. Seler responds days or weeks later to help. Do not buy this thing! It's a very complex equipment with tons of issues.
@user-bb6hg2st2nАй бұрын
kzbin.infocVTWmtc6t4g?feature=share How did you solve such a problem? The roll is unwound
@user-xl3ww7ky1rАй бұрын
Good job 👍😊
@customdesigns_unrivaledcus7443Ай бұрын
what is the best temp for the curing oven and time
@uscuttervideosАй бұрын
It really depends on your printing environment but 60°c is a good starting temperature.
@glennracoma7481Ай бұрын
Hello, can two cutters work simultaneously? If so how will the setting up of the plotters be inside VinylMaster Pro v5? Thank you
@mincadillac1954Ай бұрын
It´s bad show fuctions from different versions av VM. It´s usless. Can´t follow.
@RahamaUmar-ni5liАй бұрын
How Mach price
@BeingPunjabeeАй бұрын
real stuff✌
@ImJordanPatrickАй бұрын
If each ink has 220ml coverage, why do we need to times it by four? Doesn't the 41 cents per square foot of ink mean total ink used, rather than 1ml of each colour per square foot?
@celestinoprien3387Ай бұрын
Plz help just bought vevor 12 in cutter an can't send from the Mac to cutter thru USB nor Bluetooth it pairs but says can not connect to device
@uscuttervideos2 күн бұрын
We don't sell or support Vevor cutters.
@mincadillac1954Ай бұрын
Whay that shit music? Very hard hear what you say,
@teamcamel1755Ай бұрын
Can these machines do chrome stickers
@MikeFoolioАй бұрын
Yeah you just need to buy the chrome sticker material for this printer
@MrBlegit28Ай бұрын
Can I Pair it with a HP Latex Printer?
@glennracoma74812 ай бұрын
what plotter driver brands VinylMaster 5 has?
@keenancolbert28692 ай бұрын
Still waiting on the next in this series
@Qwaylude2 ай бұрын
thats messed up all those ones who got the bn20 and then they come out with another one. waonder can you trade in for the new one
@thelastwin2 ай бұрын
Does it have a plug-in for cutting direct from CorelDraw?
@japawaiian2 ай бұрын
@00:37 hmm.... the Manual says to place the roll "On Top" the rollers 🤷♂
@sosak10042 ай бұрын
Hey, it is possible to cut out ornaments from edible paper? There gonna be no sticker paper so no 2 layers I just wanna cut out the for example circles from paper
@kertinaproduction54862 ай бұрын
What kind of ruler is that?
@georgeobregon60212 ай бұрын
I have a metal rolling door this will work on it ?
@PimpnBass2 ай бұрын
Worst video ever trying to promote this. It would look way better applying the design to durabond aluminum and using temporary adhesion. Applying that design is going cause unwanted shadows and loom terrible. None of my customers would ever want that application versus the way I do ot.
@user-sk7uw2lm5z2 ай бұрын
Thank you this is a great video. Would like more info on the software program you used as i'm not great with photoshop or illustrator Thanks
@MJj87572 ай бұрын
you could have giving an ending view of what it looked like?
@felixshen92612 ай бұрын
Does lowering the pass stop the vinyl from curling
@samanthawhite35002 ай бұрын
Thank you for sharing.
@kaitlynsternad45442 ай бұрын
I cannot get my clapper to turn off or slow down speed. It keeps sucking my paper in!!! For the amount of money i paid for this i expect it to work properly.
@hammeredgem.j.c.90302 ай бұрын
Hi great 👍 I was wondering what is the original paper that holding bulk vinyl before cutting it. The wax paper or no stick backing of the product? I am producing large decals and cutting them in large sections and I need to assemble them or transfer them to a different piece to make all one for the customer. I don't know what to call it so that I can order it in bulk with no vinyl on it.
@hammeredgem.j.c.90302 ай бұрын
Hi great 👍 I was wondering what is the original paper that holding bulk vinyl before cutting it. The wax paper or no stick backing of the product? I am producing large decals and cutting them in large sections and I need to assemble them or transfer them to a different piece to make all one for the customer. I don't know what to call it so that I can order it in bulk with no vinyl on it.
@hammeredgem.j.c.90302 ай бұрын
Hi great 👍 I was wondering what is the original paper that holding bulk vinyl before cutting it. The wax paper or no stick backing of the product? I am producing large decals and cutting them in large sections and I need to assemble them or transfer them to a different piece to make all one for the customer. I don't know what to call it so that I can order it in bulk with no vinyl on it.b
@realtalkwchristian2 ай бұрын
Can I use hot peel film for this printer?
@MicheleMKlein3 ай бұрын
We are having a problem with the software. I am hoping someone on this KZbin channel can help us. We go through all the steps we look at the preview and everything shows correct. But when it actually goes to print, the artwork is four times larger then what it should be and all the print settings are correct. We print on vinyl wraps for cars and our printer is 60 inches wide, we try to print a simple 12” x 12” graphic on the 60 inch wide vinyl wrap and for some reason the software increases the size to be 60 inches. We have double checked all the settings and every thing appears to be normal and the print preview shows a 12 x 12. Is there anybody out there that can help us troubleshoot this issue?
@uscuttervideos2 ай бұрын
Are you exporting the file into your rip software to print?
@raygangibbs37623 ай бұрын
What’s the maximum contours cut length for the prismcut p28
@tristannovak5053 ай бұрын
If you hook it up to a roll - isnt the length infinite? It could be limited by the softwares ability to handle the size of the job file.
@raygangibbs37623 ай бұрын
@@tristannovak505 thanks, I just ordered one a few days ago. Let’s see
@mike-gq1gt3 ай бұрын
can i use a monochrome laser printer to print only white?
@uscuttervideos2 ай бұрын
You can use a monochrome printer alongside white Forever Flex soft to create white transfers. If you are asking about putting a white toner cartridge into your monochrome printer, that will just depend on if they have made a cartridge to support your printer.
@redgeminipa3 ай бұрын
If you're using Sure Cuts A Lot (Pro 4 and 5 for sure), you'll have to select Skycut as the cutter brand in order to enter the IP address in the software to establish the WiFi connection. These are rebranded Skycut C-Series machines. Choosing USCutter and Pcut does not give the option to enter the IP address. Included instructions will tell you to choose "PrismCut" which does not exist in SCAL.
@BrickcityBarbie3 ай бұрын
Hello, I am using the software with my mh us cutter. Issue I am having there is a ghost image on my print area, my cutter cuts my image fine, but towards the end as it returns to its begging point, it puts down the blade and cuts across my newly cut vinyl, I saw a way to refresh my area it envolved highlighting the entire area ( I then saw the nodes, or nodels however you say it) I. Hit the delete button, and my page was clean to start a new vinyl session. Would you know where i go to complete that option to do this?
@BrickcityBarbie3 ай бұрын
Hello, I am using the software with my mh us cutter. Issue I am having there is a ghost image on my print area, my cutter cuts my image fine, but towards the end as it returns to its begging point, it puts down the blade and cuts across my newly cut vinyl, I saw a way to refresh my area it envolved highlighting the entire area ( I then saw the nodes, or nodels however you say it) I. Hit the delete button, and my page was clean to start a new vinyl session. I cannot locate that video and its happening again, Would you know where i go to complete that option to do this?Hello, although I don't have a silver bullet, I am using the software with my mh us cutter. Issue I am having there is a ghost image on my print area, my cutter cuts my image fine, but towards the end as it returns to its begging point, it puts down the blade and cuts across my newly cut vinyl, I saw a way to refresh my area it envolved highlighting the entire area ( I then saw the nodes, or nodels however you say it) I. Hit the delete button, and my page was clean to start a new vinyl session. Would you know where i go to complete that option to do this?
@surajali55433 ай бұрын
Prize for
@Jakeholcomb203 ай бұрын
Your drivers on the website don't lead to a download link, I haven't been able to source drivers for my cutter.
@wildafshots3 ай бұрын
Does it work well with windows 11
@uscuttervideos3 ай бұрын
Yes. They are still putting out updates for the older BN-20 and BN-20A as of this post.