I cant even manoeuvre the fecking camera to see the ignition switch 😡

Hi Helicopter fans! I discovered what was "key" to my getting my choppers to work proper, instead of porposing up and down like a drunk! When I set up the flight I choose my chopper, then livery, then I discovered at the bottom was another listing, forgot right now but in there it has 3 sliders. I moved mine to 60plus and wow, I can fly now without looking like a tard. Finally, because Ive had my Cowansimulation MD500e sitting in the hangar for a year now. SO, hope that helps another frustrated chopper pilot who had problems making them work. Oh, and I set the in cockpit cyclic trim to 0 or a bit down, forward. All good, cheers!

Flying the heli is easy to me. SEnsitivities settings seem confusing as I cannot get the 407 or my MD500e to behave. Its like a drunk flying it. Im lost...help? Sensitivities seem to be 0 to 78 depending on pilot. I just cant get it. I even neutralized my in cockpit trim control....

Thank you for making this. The MSFS default helicopters seem to be too easy to fly. I fly in VR and this mod makes it amazing again.

I have this setup with the R44. In the cockpit I can click on buttons etc and they work but it doesn't see my Virpil cyclic or collective but it does recognize my Honeycomb Bravo for throttle. I have them setup in MSFS and work on MSAFS helicopters. Any help would be great.

The flight dynamics are so bad in flight sim, it’s not even close to flying a helicopter.

hello Fred, tvm for the program and the video. i just started using airlandfs beta 1.5 and works ok. but in msfs2020 - profile - contente manager say airlandfs beta 1.5 not installed, is this normal?

I'm new to the MSFS and I am flying the Bell Jet Ranger on there but one thing I'm stuck on is how do I know where to go (i pick an airport to fly from and to land at but I don't know where to go) and also how can I start up the Jet Ranger myself as I've seen videos of this happening?? Thanks

I understood it all. Great video. New to heli's but this vid helps.

No it doesn't work😢

This doesn’t work I restarted it and put it on leagacy and it still doesn’t work😢😢😢

Useless video!

How am I suppose to take helicopters seriously when their cockpit isn't shaking from vibrations. Haven't the developers been in a real helicopter? Especially this small.

Hard landing😂

Do not look directly into Allan.

how do you bring up the overlay on the bottom right?

thank you very much for this tutorial. Does playstation 4 work with dualshock?

I’m Brazilian and writing for to thanks your help about helicopter in the flight simulator. Was very good for me. God bless you.

Holy shit man. This is incomprehensible.

Hi. Could you please share your experience on the sticks ability to return back to center after cutting the spring. I have stock spring, but it sometimes is unwilling to get back to zero point on Y-axis. So I am worried this could make it even worse. Or maybe I should ask for exchange, as it is still under warranty...

Great stuff thanks

may I use saitek pro flight yoke to pilot heli ?? could you help me to set ??

Great

Fred, I have a question about the UH-1H Huey Iroquois model you're working on. I believe I loaded everything properly (msfs community folder, copying config file to profile of AirlandFS). But when I add max power from my Logitech Extreme 3D Pro joystick (via the x-slider control) the helicopter power doesn't increase as it should. Wondering what I'm doing wrong. Help !! Thanks! FYI, I did release the parking brake.

Thank you for this video! It was helpfull for me. Im also using Thrustmaster joystick like you have, i just have model with separate throttle (T.16000M FCS). I assigned collective to that throttle axis, and also i assigned helicopter throttle to that little slider on bottom of my joystick. Some of people here suggested you should do new helicopter profile from scratch, but i think the way you did by deleting unnecessary axes or buttons was better. And i also did this way following your tutorial.

Hi Fred,i am french ,my best wisches for this year,but à have à probleme with airland except that my jostick configuration works for everyone helico,when i switch to the h125 nothing,works Anymore, yet the 125 is well hacker in airland,have a solution for that please,thanks

Thank you for this!

May I post this video on my Discord server?

is this demo done in ms flightsim 2024?

have you experienced microsoft flightsim 2024? kzbin.info/www/bejne/np-5Y2mZnK2hr5Y

hi hi all... wonder if anyone can point me at a good forum for heli sim enthusiast. One thats active... I'm looking at getting MSFS, busy putting together a control setup etc. G

So when will you show us the end result?

Just want to say thank you for this awesome content. I am a complete noob but not only could I follow the video but it got me very excited about things to learn and challenges to overcome.

Thank you for this. I initially reviewed this device and stated that it was very uncomfortable flying helicopters because of how strong the springs are. Thank you for this fix. Unfortunately the twist motion is also very strong for rudder control. Wondering if you have looked into this as well.....

I'm going to stick with your whole tutorial set because I like your style. But I think your joystick trim assignment section was confusing. Telling us the left/right reverse buttons of the button assignments you want us to assign was hard to follow. Especially because you aren't consistent in the left/right reversal pattern. But I replayed it a few times and got it right. However to me (who has never tried flying helis) your trim assignments were not intuitive. In the center column of the joystick pad you assign the top button to trim backwards and the bottom button to trim forwards. I reversed those assignments. Then you use the right two buttons to trim right (top key) and left (bottom key). Instead I moved left trim to the lower left key and right trim to the lower right key. Laying these four trim keys out in the direction I want to move is much more intuitive to me. Otherwise, I'm excited to keep learning this new type of aircraft from you. Thank you.

Sensacional.

Thanks for these helpful videos. You keep saying left pedal when you mean right pedal, I think. That's what your controls graph show at least.

Really interesting helicopter

Grazie Fred, So happy and grateful to have such a friend in you! Looking forward to more adventures :D

I love flying this helo, I got it as soon as I could. I love the complexity of the flight model and how it has transferred into the sim. As soon as I see any release from Toag's Hangar I know the helo's will be on point and fly as expected. Great work behind the scenes on it and all merit to you and Toag on such a great helo product, that whilst some may not have known about fully beforehand, by getting it and flying it within the sim will create more fans of this little helicopter. Do you know if there are any plans to redo the Huey using the native MSFS helo controls, or whether the SA-342 Gazelle could be on the cards?

Hi Fred, I did not know you were so active behind the scenes. Very good to hear :) I started learning to fly helicopters in MSFS with AirlandFS before SU11. Great to see how far helicopters have come in this sim. And it looks like MSFS2024 will bring even more goodies for us rotorheads.

Great! Great! Great! I'm happy that Airland Studios and Fred is still alive 😉 . Thank you so much for your great content and your contributions.

Great video. I trust your opinions on flight model more than just about anyone else I can think of in the flight sim community Fred.

Best heli yet 😊 I'm loving it...

Appreciate the video I subbed. I love to learn and boy do I need to learn helicopters? I'm not too bad but it's a little challenging

As a vr noob, this did not teach me how to fly a helictoper.

I still can't find the trim which makes the helo go forward without pushing on the joystick, thanks for any help.

every time when this guy says "thousand feet per second" it hurts me, because i cant take him like as instructor. First time i was thinking, that was a slip, but i am at this 4-th episode and he is still sayin that :D Looking forward when he realize that its not "per second." But otherwise his other instructor skills are nice...

excelent video!!!!!!! thank you so much!!!!

Let's me tell u later