I need to know this

Great idea. Thank you.

Where can i order

Hello there, I'm very curious to know what material is used for the heel counter-that's a real important part of the boot

I have 2 of these boxes from home depot 5 years ago, it was on sale for $24.

Price

How are the hats in Alberta different from the ones in Texas?

Just plastic junk. It’s great for a little while then straight to the dump like the rest of the economy.

How do you clean it out. It appears poor in engineering

Greetings from Australia, we would love to see your boots sent to Australia please, what retailers do please

Yall need to follow in Nicks handmade boots footsteps and post some videos of your boots being made.

Too many big dollar items. Come on, folks. We ain’t all rich! Just keep it simple and we can all afford it.

While I'm waiting on ardisam to get the part as it's only been two months, last machine it was three months before they got the part. This time I think it's the wheel bolt. You wouldn't think it'd take more than a week at most, but it is ardisam. So I thought I'd share a few emails with customer service from the first mower that they finally replaced. And remember, they never had anyone look at the machine after it broke through the deck. ---------------- From the pictures it looks like the brake pad is completely wore off, that is where we are getting the idea that the problem came from there. Another thing I can see in the pictures is that bolts were in there at one point in time. It looks like you only need the bolts that come in from the sides, not the ones that go through the deck of the mower, correct? I am able to send you a new brake pad and all the bolts, nuts and washers needed to get your mower running again Cust service ------------------------------------------------------ Read your email, I have some questions. You say the brake caused the problem. That's not what caused the problem. The brake pad didn't wear down, it broke at one of the triangular pieces holding the pad. Being 2 hours away from where the mower is kept I can't say but the one side with the triangular piece broke off. That isn't wear that is a defective part. However it was the missing bolts that was the cause of the damage. If the missing bolts were there where is the scratching damage from them around the bolt holes while they were backing out from the vibration? And where did the nuts and washers that were on the inside of the pulley housing disappear? There isn't sufficient room for them to slide out of that housing. There should have been nuts and washers inside the pulley housing but there weren't any. As far as the vibration causing any bolts to loosen and fall out, then why haven't other bolts loosened and fallen out. Was the torque not done to the specifications which might explain vibration? Videos on line at your site for replacing the drive belt clearly show a design change for the 2 black guide plates on each side of the main pulley. They are no longer secured by bolts going down through the deck. Latest design shows them bolted to the large red base plate. Obviously the bolts through the deck were a weak point. The new design has no bolts through the deck. Without the "missing bolts " all the forces from the main pulley are directed to the bolts through the deck. That would have eventually caused the those bolts to pull through the holes in the deck. When was the design change implemented? -------------------------------- Good morning! I didn’t answer those questions because I don’t have answers for your questions. I have no idea why they ALL vibrated loose, I have no idea why the nuts that should have been trapped inside disappeared. Sometimes, things happen that I can’t explain, the world is an imperfect place. We think, (and by we I mean me and both of my managers) that the brake pad being completely gone caused the issues with the bolts. Diagnosing problems from pictures is not ideal, so we use what we have and we do what we can. This will absolutely all be covered under warranty (this is the connector on the tow bar, it broke after we jury rigged the deck to keep the mower running, I did not take their bolts). Per my last email, I certainly can help you out here by sending you everything you need. The other part of my job is to educate our customers about proper maintenance and things that can be done to prevent future problems. I apologize if you were offended by that, it certainly wasn’t meant to be insulting or anything like that. If I send you parts, are you able to install them yourself? Will you be able to drill the pin out that snapped and put a new one in there if I send it? Or would you rather bring it to one of our service centers and have it repaired under warranty? ---------------------------------- Notice after having looked at the pictures they decided the brake "looked" like it completely wore off. At no point did the lock nuts vibrate loose, they were still tight holding onto the brake. So their customer service didn't care enough to do any actual inspection of the machine, they just decided they weren't going to repair the damage. Later on after more work the big pin on the mower where the tow bar connects also sheared off. That was the part that took 3 months to show up. By that time they had finally offered a new machine, which of course lasted about 15 hours before the wheel fell off, the bolts sheared off, the belt broke and such. I do not recommend anything from this company, they have more companies. I also bought one of their pop up blinds - Baronette was the name. One of the fiberglas ribs on the hub broke, later that same spring it developed a tear which in subsequent winds tore the blind apart. Less than two months of use and it was unusable.

Looks like they didnt measure the mount hinge correctly when you switch to vertical the foot stop goes into the air. The whole machine could roll downhill.

2 months, second year this thing has been down for multiple months and I'm not able to mow the 60 acres, grass and weeds are getting high. Far as I know we're still awaiting the bolt for the wheel that fell off. I do not recommend this thing. Customer service is atrocious.

Chisos boots have leather lined gel insoles.

I think I should get 10.5 from now on as I had 10’s I didn’t remeber that when I got the new ones… 😢 the left one is starting to give me some discomfort! The other one fits good now…. Any other tips on loosen These up a bit? It’s just the left one that bothering me now! 😢

I’d love to see how these compare to @ChisosBoots on @roseanvils channel

damn. glad i spent time watching this just for him to say read the label.

Bought mine Nov 2021 to use the next year. Worked fine seemingly for the year. 2023 I got maybe six or seven days use before all sorts of things broke off the machine. Enough so that it was put in the shop end of June and parts to fix it didn't show up until almost November. So ardisam offered a new mower (after five months of no mowing the sixty acre deer property it was bought for). 2024 the new replacement lasts about 15 hours. The pulley guide bolts - all 4 get sheared off (pretty sure the same happened on the first one but never realized it), the pulley breaks and the wheel falls off. ardisam says sorry, figure out how to get it out of the field and take it to a service shop. Get it there about the end of June. Get it to the shop, ardisam is covering the cost but the shop tells me don't expect the mower until sometime in September because they're waiting for the parts. Do not recommend, try DR, Swisher or whatever else you can find.

Geez, that was a chore to get through. "Here's how to pack a camp kitchen..." *proceeds to mumble for seven minutes about every disorganised item in his repurposed toolbox* "So, hope that helps."

How to pick out a cowboy hat: 1. I like how it looks (shape/style). 2. I like the color. 3. I want it 4. I can afford the price. I'll take it. NOTE: numbers 3 and 4 are variables regarding sequential order.

How does the windshield hold up when challenged?

Ice for days? Only if you keep adding ice daily.

you make it look so easy! I'm not a hunter, but I've seen deer several times on my fishing trips, so I got a mouth call hoping to interact a bit with them on my future trips. 🙂

"My butt's sore." Did not see that wicked-ass humor coming. And she delivered it brilliantly.

Thanks for the feature! Ride HYER!

How to pick a cowboy hat. Tried a bunch of hats on. This one fits. Kek.

I wonder if it would work with a 55 gal drum reservoir

does this have metatarsal protection and toe protection? (noticed it did not flex)

Things i took back to England from texas. 6 cans of hopadilo, 6 cans of voodoo ranger . 300 black and mild cigars mostly jaz flavour. A black pugs brand cowboy hat i got in a gass station just outside Shamrock where we got on the 66 . I pair it with a magpie feather and matching black bandana. Ive got photos wearing it outside the jailhouse in Silverton colarado. Wore it as we drove down the milion dollar highway into Auroray . Piece of advice do not drive that road go around its crazy.

1:20 I also thought that last hat looked the best on her!

Great story. Thank you for sharing it. Many blessings to you and your family, Nikki.

Thank you for sharing your setup. I've adopted an old hard side luggage for my kitchen setup and plastic plates and bowls and cutting board. Love the use of tums and toothpaste in your kit, very overlooked sometimes.

Top of my ears are touching mine, feels good enough for me?

Does Yeti support your values? That’s a serious question for someone who spends 2x the money.

Jetboil for car camping?

Hands down the best work boot I have owned. I've had 2 pairs, and both lasted longer than any other boot I've purchased in the last 25 years.

Is the compatible with other 25 gal sprayers?

Comes in different colors and different names depending what country you live in...been around for a while... issues in the first ones...still needs improvements and available parts when needed.

You picked the best one.

I love the jacket. Do you guys sell it?

No Electromagnetic Start?

On the labels there is also a statement saying that NIOSH/MSHA approved respiratory protection for chemicals should be used for application. For over a week I have tried to find one with no luck. I have contacted NIOSH/MSHA and OSHA with no response. It is pretty scary that the evidence is so overwhelming that these chemicals literally kill people but you can't find the approved protection or even a video about how to protect yourself from serious injury or death? Everyone is just concerned about their arms and legs but no one realizes that we are risking our lives every day breathing in this stuff and they literally don't make the respiratory protection they claim you legally have to use? I have been in this business for 27 years and have avoided these chemicals as much as possible while I watched all of my friends that were also landscape business owners die one by one. They barely put a scent in it to warn people that they're breathing in this deadly chemical either. I would love to know why you don't wear a respirator and if you think that people should wear them can you please tell me where in the world we can get them? Thank you!

GREAT VIDEO

I have the full desalt stack on unit with the radio and I use it as my tacklebox and camping stuff I even made rod holders on the bottom wheel box

And now they sell for hundreds of dollars on the secondary market lol

My problem is getting the boot on, once it is in it is very comfie it just getting my foot into the boot.

Great video. Thank you. I think everyone loves prime rib.

Doesn’t break in. Stays stiff. Too stiff.