Is this only for the meta quest 3? Can it simulate other drones?
@Fpvfreaky7 күн бұрын
@@adon2424 I don’t know as I only have the quest 3. At the moment it has 3 drones to choose from.
@nerdCopter12 күн бұрын
+1👍💪
@Fpvfreaky11 күн бұрын
@@nerdCopter 👍🏼😁
@colinriches151912 күн бұрын
This looks awesome! Good job mate.
@Fpvfreaky12 күн бұрын
Cheers dude 👍🏼😁 the next one will be a lot better.
@marieboakes592914 күн бұрын
That's so cool Lou 👍😎 absolutely brilliant 👍
@Fpvfreaky14 күн бұрын
Thank you Marie. The next one will move 👌🏼😎 I’ll be back.
@fabulousformations14 күн бұрын
That’s well cool 👌😊 yes to animatronics that be awesome 🤩
@Fpvfreaky14 күн бұрын
Thanks babe. Yes it will 😎
@Fpvfreaky14 күн бұрын
📍 😎TIME STAMPS FOR YOU😎 0:00 Intro 0:26 The work of art. 0:34 Time lap part 1:15 The first look at the Terminator Skull 1:33 Preparing The 3-D printed part 1:43 Apply your filler primer 1:53 A little trick for your teeth. 2:00 I apply spray to the skull. 2:08 applying masking tape to your Model. 2:10 paintbrushes. Make up sponge, graphite powder. 2:15 applying the graphite powder to the terminator skull. 2:22 The Terminator chrome skull revealing. 😎ILL BE BACK😎
@DanteKeith26 күн бұрын
Have you tried put the 03 on the bottom? Or do you balance it with the battery on the side?
@Fpvfreaky25 күн бұрын
@@DanteKeith the battery balances it all in place. The new fly whoo has it underneath on the 2”. Just come out.
@DanteKeith25 күн бұрын
@@Fpvfreaky yea I have the flywoo fly lens 85. I like the setup you’ve created tho. 😎😎👍
@AcroNerdFPV26 күн бұрын
You gotta 3D print the canopy for it! Looks so sick!
@Fpvfreaky26 күн бұрын
@@AcroNerdFPV cheers dude. Yeah I can now 👍🏼😃 I’ve just got a new one
@mikaeljohansson583028 күн бұрын
This is so dang cool. I love to see the butterfly
@Fpvfreaky28 күн бұрын
@@mikaeljohansson5830 thanks mate. It is amazing. I printed the butterfly for the wife. She loved it. It’s really cool. I think I will be printing some crazy things soon. 👊🏼😁
@marieboakes592929 күн бұрын
These are so cool!! Will you be selling any? xx
@Fpvfreaky28 күн бұрын
😁
@Fpvfreaky29 күн бұрын
Links all below timestamps 0:00 started to print things. 0:03 The flexi frog. 0:31 Bambu labs helicopter. 0:42 test flight of the 3D printed helicopter. 0:53 skeleton dragon keyring - articulated. 1:26 links are below 1:28 They are looking good so far 1:35 The Baby T-Rex. 2:02 All 3 Together so far. 2:14 My Volkswagen Mirror swingers. 2:37 Ai generated butterfly skull WallArt 2:47 The start of something big. 2:54 one of my failed prints but still usable parts. (my fault.) 3:00 The reprinted parts. 3:08 All parts ready to assemble. 3:20 DUMMY 13 printable jointed figure. 3:43 What’s your favourite.? 3:50 let me know in the comments. 4:00 some slide shots of the size of this model.😍 don’t forget to subscribe. The flexi frog makerworld.com/models/565679 Skeleton Dragon Keychain - Articulated makerworld.com/models/568950 The baby T Rex makerworld.com/models/571604 Al generated Butterfly skull Wall Art makerworld.com/models/385968 DUMMY 13 Printable Jointed Figure makerworld.com/models/183780
@gameofstingray6436Ай бұрын
What is the name of the screen
@FpvfreakyАй бұрын
Hi mate. The goggles that I’m using a Called quanum fpv goggles. I’ve found a set on eBay for you. They are not mine. Or nothing to do with me, but just thought I would include a link for you.so you know what they are. Hope that helps. Let me know how you got on with the project… www.ebay.co.uk/itm/405063802767?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wdso_prBSLK&sssrc=4429486&ssuid=&var=&widget_ver=artemis&media=COPY
@gameofstingray6436Ай бұрын
@@Fpvfreaky thanks bro
@FpvfreakyАй бұрын
@@gameofstingray6436 no worries bud 👊🏼😎
@CJT_3Ай бұрын
I'm picking up one of these today after work. I've had numerous bed slingers but this one just seems different from what I've researched. Looks like the new era of tech for this style of printer.
@nomercyridingАй бұрын
You won't be disappointed especially if you are coming from a 'last gen' model. It's night and day from my ender 3 V2, and the AMS combo is a game changer at its price point. If you don't have a bunch of different colors already go ahead and grab some. The AMS is so intuitive you'll just want to print multicolor constantly.
@FpvfreakyАй бұрын
@@CJT_3 you won’t be disappointed mate trust me. This is the nuts.
@fancy_vr123Ай бұрын
i got mine about a month ago i love it so far way faster then my other printer (adventure 5m pro) alot mor easier to use too
@FpvfreakyАй бұрын
@@fancy_vr123 oh hell yeah I had an old cr-10. Mate this thing rips. It’s 4x times faster. I’m able to make my old files. On my laptop. And phone. The prints are amazing. Top notch. A follow up video we’ll be coming 100%. So excited to make quality stuff now 👍🏼😁. Such a pleasure to use this 3D printer. How are you finding it.?
@fancy_vr123Ай бұрын
@@Fpvfreaky really good i love the muti print bc i got the combo
@FpvfreakyАй бұрын
@@fancy_vr123 wicked mate. I’m so blown away by it. 👌🏼😁
@FpvfreakyАй бұрын
0:00 Intro 0:05 Unboxing the Bambu Lab A1 combo 3D printer 0:11 I’m in shock I have the Bambi 3D printer😱 0:16 3D Bambu Lab A1 Bed and instructions. 0:21 3D printer AMS stands and parts 0:25 Bambu Lab A1 AMS holder 0:32 The Bambu Lab A1 printer gantry. 0:41 3-D printer filament and PTFE tube 0:48 The Bambu Lab A1 print bed 0:57 The Bambu lab A1 First Ever Print. 01:44 I’m so pleased I bought This 3D printer.
@keifer242Ай бұрын
Hi, if you're selling these I'll definitely buy one. If not can you show how the setup works. Thanks
@FpvfreakyАй бұрын
@@keifer242 hi mate. Yeah I’ve not finished it yet. To many things goin on. And yeah, I probably will make some more as my 3-D printer is broken now after i printed a full predator suit. So I’m looking to buy another one.
@tezuki1512Ай бұрын
Japan law is under 100g no need to register?
@FpvfreakyАй бұрын
@@tezuki1512 erm that I don’t know. All I know is the limit is 100g and this is under with battery. I’ll check about register.
@glenorpheusАй бұрын
The Quest 3 is quite the game changer. Just subbed to you my friend, as it seems we share many common interests. Drones are something I've been looking into for a while as well, so lots of videos here to watch. Keep up the great work. 👊🏻
@FpvfreakyАй бұрын
@@glenorpheus ah thanks dude. I’m in to loads and don’t post much 😂 have you got the quest 3 then.? Drones are a passion for me aswel. As many other things. 👍🏼😉
@glenorpheusАй бұрын
@@Fpvfreaky Yeah I upgraded to the quest 3 from the Q2 and the CV1 before that. I'm a big Sim racing addict. lol
@FpvfreakyАй бұрын
@@glenorpheus oh ok cool 👍🏼😀 I need to get a pc next. I’ve seen some of the stuff recently the quest three is producing good fruits. So that will be the next thing on the list.🤣😂 it’s never ending bro. 😁 love it. Add me I’m fpv freaky.
@THETRUTHISOUTTHERE-m9vАй бұрын
What FC and ESC stuck you are using for this?
@FpvfreakyАй бұрын
@@THETRUTHISOUTTHERE-m9v hi mate. I’m using the F4 2-3S 20A AIO FC V1. Straight from the Pavo pico. See build video. Pavo Pico - To Pavopick - How To Build yours kzbin.info/www/bejne/mYCZe4qvfJqbosk
@EpicWaterLionАй бұрын
Do you have twitter or insta or maybe I mail. I have far too many questions about your project. KZbin comments can’t do it justice
@FpvfreakyАй бұрын
@@EpicWaterLion no sorry. I try not have to many accounts. Does me head in lol if ya get me. I’ve not done any colour grading or anything at all in the footage that you seen. What questions do you have .? I will try to answer them best I can. I’m on TikTok .
@FpvfreakyАй бұрын
@EpicWaterLion I hope this video helps you buddy. Sorry if it seems abit rushed. It did take a while to make. But I just hoping it answers your question about goggle view. As regarding freestyle, I just haven’t had enough time on it to experiment. But I’m sure it will.
@EpicWaterLionАй бұрын
Damn that thing flys rock steady without jello. That is awesome. And thanks for the upload!
@FpvfreakyАй бұрын
@@EpicWaterLion yes, he still has some Jell-O but not a lot. It can still be improved. And you’re very welcome, mate. 👍🏼😊
@FpvfreakyАй бұрын
0:00 intro 0:11 subscriber asks a question 0:15 could you please also do an upload with an in goggle recording from the DJI goggles 0:25 DJI 03 air unit raw footage unstabilised. 0:56 DJI 03 air unit footage placed in Gyroflow for stabilised footage. 01:38 inside my DJI Integra goggles my view what I see. 02:29 DJI Integra goggles view with music.
@uksewingmachineservice7030Ай бұрын
Really cool bit of flying there buddy looks like a really nice place to fly great video Don 🤠🇬🇧👍👍👍
@FpvfreakyАй бұрын
@@uksewingmachineservice7030 cheers don. Yeah I only found it last week. First time flying there. 👍🏼😁
@EpicWaterLionАй бұрын
Could u please also do a upload with a in goggle recoding. I would love to see the unstabilized picture like I would see it in the goggles. Oh, and can it do freestyle? :D
@FpvfreakyАй бұрын
@@EpicWaterLion hi mate. What of this actual footage of this flight.? I’m still getting used to the DJI remote and the drone. As I’ve not flown in over a year. So I’m abit rusty. But I was getting used to it on my last pack. I’ve still got some footage. So I’ll do a video on it. 👍🏼😁 thanks for your comment .
@lifeinmotion3339Ай бұрын
Epic I love the church area and the long range test 👌🏼😉
@FpvfreakyАй бұрын
@@lifeinmotion3339 thank you 👍🏼😉
@lifeinmotion3339Ай бұрын
Wow beautiful 👌🏼😮
@FpvfreakyАй бұрын
@@lifeinmotion3339 thanks 👊🏼😁
@FpvfreakyАй бұрын
I tell you what guys this must be the most relaxing fpv flight I have had on this drone so far.
@FpvfreakyАй бұрын
THE ONE SHOT ONE TAKE WITH THE PAVOPICK 0:00 We have lift off 0:07 The path we take 0:44 The Tree 01:20 Flying Tree Tops 01:39 Not knowing what was the other side 01:58 Enjoying Fpv
@chrisbee5481Ай бұрын
If you ever have problems with that frame, check out the hglrc petrel 120x frame. Much stiffer.
@FpvfreakyАй бұрын
Ok mate thanks. I think I’ve heard of that frame. 👍🏼
@chancewoolsey3415Ай бұрын
Dude that view is crazy. Cant wait to do a build for myself
@FpvfreakyАй бұрын
@@chancewoolsey3415 cheers mate. I’m not 100% happy with it. But it’s not bad. Do you fly.?
@FpvfreakyАй бұрын
0:00 intro 0:27 The Pavopick first test flight 03:52 church flight 04:59 Oak orbit 05:38 Range test Dji ham hack 06:21 battery warning time to get back
@kaskalo2Ай бұрын
Looks awesome. Fragile, but awesome 😊
@FpvfreakyАй бұрын
@@kaskalo2 thanks dude. Yeah it’s quite robust to be honest.
@FpvfreakyАй бұрын
@@kaskalo2 new video of the flight test just uploaded 👍🏼😁
@TimePirateFPVАй бұрын
yes. i did the same with HDzero. Swapped to slightly smaller Tri-Blades (from a Mobula8) and it wasn't so floaty, soooo good.
@FpvfreakyАй бұрын
@@TimePirateFPV hey dude. You say it wasn’t .? I’m flying soon. I can’t wait. I’m so itching.👍🏼😁
@neonuser4562 ай бұрын
Nice build
@Fpvfreaky2 ай бұрын
@@neonuser456 thanks man 👍🏼😉 still yet to test. Charging my battery’s. Ready for a test flight. 😉
@JJFliesAndMakes2 ай бұрын
Don't do this to me, I just barely finished my 3.5" build and now I'm becoming obsessed with small drones. This looks very cool, looking forward to see some fly footage and flight times.
@Fpvfreaky2 ай бұрын
😂 sorry dude. Yeah me to I’ve not had this drone 5 mins and tore it apart. Makin it how I want it. Yeah I can’t wait to fly it. 😭🌧️☔️💨🍃 yes flight times I’m wanting 👍🏼😉 thanks for your comment.
@Fpvfreaky2 ай бұрын
Time line 0:00 intro 0:07 why I’m changing the Pavo pico 0:29 drone motors I’m using. 0:41 the reason is flight time + prop wash. 01:14 no computer needed for these mods. 01:51 03 air unit wire control. 02:41 micro drone buzzer pins. 02:59 weighting parts before stripped down. 03:13 dji camera stripped down and in new housing. 03:36 Dji 03 air unit naked weight 18g with antennas. 03:41 Dji o3 air unit with camera naked and new housing weights 20g 03:46 total weight of drone Dji 03 air unit 04:28 New holes for the Dji o3 air unit to fit the new screws on the frame. 04:59 That is my PAVOPICK build. Let me know how you got on with yours if you made one.
@Fpvfreaky2 ай бұрын
These are not affiliated links. I have no connection with these people at all. If you already have the Pavo pico And o3 air unit. Parts list Frame & Canopy Cover for Happymodel Crux3 a.aliexpress.com/_EwpW4tH Motors HappyModel EX1202.5 1202.5 6400KV a.aliexpress.com/_EJjVvkP Longer screws sourcingmap M2 x 40mm 304 Stainless Steel Phillips Round Head Screws Bolt 60pcs amzn.eu/d/07nGtlDk
@chrisbee54812 ай бұрын
I use 1204 6500kv motors on 3.5x2.2 bi blades. Custom 3.5 inch TP frame. Flys 26 min at 50kph with 2s 18650 LiIon. Still analog. Thought of O3.
@Fpvfreaky2 ай бұрын
Yeah I’m thinking tri blades might. Be better have you tried them at all.? That’s a good time. What is your weight.? I can’t wait to fly. Uks crap summer at the mo.
@chrisbee54812 ай бұрын
@@Fpvfreaky collecting and testing props is my love hate passion 😆 From my experience the 1202.5 motors are best suited with the Gemfan 3018 bi blade props. The tri blade GF 3016 dont perform well, because they are too heavy for the small motors. They dont have enough torque for tri blades. I tried some rcinpower 1204 8000kv on 2S. These are okay on bi and tri blade 3" props. Although I must say the bi blades perform better, but are harder to tune.
@chrisbee54812 ай бұрын
@@Fpvfreaky mine weighs 56g dry with gps.
@chrisbee54812 ай бұрын
@@Fpvfreaky if you want to try tri blades that work nicely on your 1202.5 motors, go for the gemfan 2520.
@FpvfreakyАй бұрын
@@chrisbee5481 cheers for the info mate.👍🏼
@bluecavemen2 ай бұрын
What was the reason adding a new battery to it? It stays longer in the air? How can I calculate what battery I should use without overloading a helicopter if I want to use a bigger battery?
@Fpvfreaky2 ай бұрын
The reason being is I didn’t have too many of the original helicopter batteries but I had access amount of drone batteries the 1S batteries that I fly with my mini drones so I just added the cable needed for the helicopter. What heli do you have.
@bluecavemen2 ай бұрын
@@Fpvfreaky well i just bought the same firefox with one battery. i just thought the 550ahm would mean that the battery would be more then 15min longer then the original batter
@Pelerrisasi2 ай бұрын
Nice
@Fpvfreaky2 ай бұрын
@@Pelerrisasi thank you. Just working on the build video. 👍🏼😉
@Pelerrisasi2 ай бұрын
@@Fpvfreaky i really wanna see when it fly, sorry bad English
@Fpvfreaky2 ай бұрын
@@Pelerrisasiyeah I can’t wait to fly. It’s raining here in the uk. 🤦🏼♂️
@k-s-n2 ай бұрын
Can you give the full spec?
@Fpvfreaky2 ай бұрын
@@k-s-n yeah I had been documenting it while doing this build so I’ll have full spec in that video when I upload it. 👍🏼
@starshipfpv2 ай бұрын
Dang tiny.. bet it ripps
@Fpvfreaky2 ай бұрын
@@starshipfpv cheers bro. Yeah when we get a break in the weather I will test this week, hopefully
@szymonbieszczad36262 ай бұрын
Sweat 💦
@Fpvfreaky2 ай бұрын
I’ve officially named this drone the Pavopick #pavopick
@Fpvfreaky2 ай бұрын
BUILD VIDEO HERE. Pavo Pico - To Pavopick - How To Build yours kzbin.info/www/bejne/mYCZe4qvfJqbosk
@chrisbee54812 ай бұрын
Props in view?
@Fpvfreaky2 ай бұрын
Only very slightly.it will get cropped out in Gyroflow anyway. I will be doin a build video if interested.
@chrisbee54812 ай бұрын
@@Fpvfreaky whats the lowest voltage the O3 can go? Im thinking of a 2s Liion o3. But that can go down to 2.5v per cell, 5v.
@Fpvfreaky2 ай бұрын
@@chrisbee5481 well I know for a fact from my on board footage. that the o3 air unit works still at 5.8v but I would not go any lower. Check this video out. It might help you. kzbin.info/www/bejne/iJ3dnqKBg5iVb7Msi=UmTndy_zXwALYeX8
@kiekje732 ай бұрын
Cool... seen your vid after 7 years.. But thanks for trying my design!
@Fpvfreaky2 ай бұрын
Oh was it your design then .? 😀 cool I think I’ve still got it somewhere. lol better late than never I guess 👊🏼😆. Thank you for putting your work out there .
@starshipfpv2 ай бұрын
Super smooth.
@Fpvfreaky2 ай бұрын
Cheers dude. Hope your well. 👊🏼😁 I’m playing around with the o3 settings at the mo. Any ideas.?
@colinriches15192 ай бұрын
Cool. Where is that?
@Fpvfreaky2 ай бұрын
The discovery 👍🏼😉
@Fpvfreaky3 ай бұрын
Get yours here. 👇🏼😁 vm.tiktok.com/ZGeqRVbJX/
@NewYorkRipper773 ай бұрын
beast in spotlight! let loose all and everything....showing poor brutal humanity to cameras. i was near tears to see his shape in laser on newer Prodigy Concerts. 5 Years now..... imagine what this band could wrote or done for musix! Yeah english Bad coz German....but hope you got it
@Fpvfreaky3 ай бұрын
Bro your English was perfect. Well said. I know it was amazing when they did it. Gave me goose bumps all over. All sorts of feelings. I’m pleased they are back on tours, poor guys. They are only doing it for fans the tours as they don’t need to. But do it for us. Amazing. Thanks for your comment bro. It means a lot 🫶🏼🐜📡🫎🦊🔥🤡