2 жыл бұрын
4 жыл бұрын
6 жыл бұрын
6 жыл бұрын
Пікірлер
@ElJaviTuning 22 күн бұрын
Hi Sir, how do I handle idle control on a 4g63 with you ECU? Pre-Ignition X4 Assembled - Fully Speeduino Compatible
@krisda143 2 ай бұрын
What corolla vehicle pistons you used i have a 1zz that im going to build an turbo can i get some information please
@ElJaviTuning 5 ай бұрын
What injectors do you use?
@OpenLogicEFI 5 ай бұрын
I've since gone to bigger injectors but at the time they were 1000cc injectors that I ran at a base pressure of 50 psi.
@ElJaviTuning 5 ай бұрын
@@OpenLogicEFI yes but what model? I'm looking for injectors cheaper ones
@OpenLogicEFI 5 ай бұрын
@@ElJaviTuning They were from fiveomotorsport. I've had very good luck with them over many years. The ones I had were for a Subaru. I'm sorry, I don't remember what years were compatible. If you're building an SR20, there are several years of Subarus that had the same style side feed injectors. For some reason they tend to be cheaper than their SR20 variants. The only modification you'll need to do is use the pigtails that fit the Subaru. They're a fairly standard connector I'm sorry I don't remember what they're called.
@ElJaviTuning 5 ай бұрын
@@OpenLogicEFI I'm built a 4g63, I'm trying to go 50% methanol blend 50% pump gasoline mix. I think I need at least 1600cc or something.
@OpenLogicEFI 5 ай бұрын
@@ElJaviTuning Depends on how much power your want to make. I am using e85 out of the pump (about 70-75%) and have had zero knock issues at 26-28psi. I think methanol is about 6:1 stoich, with half pump gas you'll be similar to ethanol. Depending on how much power you want to make e85 might be a much cheaper way to go and won't require playing the mixing game.
@evanleonardomirandacruz6031 6 ай бұрын
Could you make a tutorial
@mikeb7711 7 ай бұрын
🤣 "PromoSM"
@LenbIix 8 ай бұрын
god damn first comment after 8 years but that shit sounds so good
@leonlee995 8 ай бұрын
Awesome video man! Im about to get a 1zz too but shld i be worried that same engine issue might happen? Or how do i tell if the 1zz is about to fail? Is there any symptom to look for before my purchase? It has 120k mileage on it
@JoseBrisenoJr-hj1pu 8 ай бұрын
No updates i see
@OpenLogicEFI 8 ай бұрын
?? I wasn't aware I needed to give any. Still runs fine. It's getting body work done it got rusty.
@kerbalnout1255 9 ай бұрын
Respect, keeping the lights on 💪
@ipaqmaster 9 ай бұрын
Thank you Aurora
@someadamguy386 9 ай бұрын
👍
@dailymoods9368 9 ай бұрын
👍
@Ballsack44 9 ай бұрын
Lol
@forgottenknowledge8917 9 ай бұрын
I'm using clamps since I don't have a welder. It only costs 100 bucks for a straight pipe vs 800 bucks at the shop 😳
@crankyanker2682 10 ай бұрын
At 0:42 what does he mean by "port"? I have the exact same engine and this is needed done on mine soon cause it's ripping thru oil so I am curious and welcome to any help. Where the heck do you even get all the parts for this?
@Makal.0w0 11 ай бұрын
How much power are you making? I want to turbo my 1zz.
@Edvard-Aliev Жыл бұрын
У меня есть мой старый 4zz-fe, что мне нужно сделать что-бы он поехал как ваш 1zz-fe?
@richardsanchez4435 Жыл бұрын
How long did you drive it with a k04 stock and what tune did you get.
@OpenLogicEFI Жыл бұрын
A few days but very lightly. I only got on it to make the video. If I pushed the throttle to more than 3/4 it would trip an overboost since the wastegate perimeters changed with the new turbo. The tune is by Stratisfied.
@richardsanchez4435 Жыл бұрын
@@OpenLogicEFIthank you
@theraven8009 Жыл бұрын
Do you have any dyno tuning results for before and after installation? I have been trying to find more research on your product.
@OpenLogicEFI Жыл бұрын
That's my daily driver. Because of it's age it's required to pass NYS emissions and have a working OBD2 port so this car isn't on one of my ecu's. Although all of my ecu's are Speeduino compatible and use official speeduino firmware. There are thousands of successful installs all over the world. So searching for speeduino results will give you an idea of what you're looking at. The main differences between most boards will be the way it's installed and/or the amount of output channels. But they all run on the same basic firmware.
@theraven8009 Жыл бұрын
@@OpenLogicEFI I really appreciate the informative and quick response. I'll definitely look into the speeduino.
@JesusCruz-lq6ml Жыл бұрын
Amigo las bujias r5671a-8 no t3 dan problema por ser sin reisstencia
@Grey2zzMRS Жыл бұрын
Is this a GT or GTS?
@OpenLogicEFI Жыл бұрын
GT 1zz engine
@Grey2zzMRS Жыл бұрын
Nice! Saw your other video of the build, you used FIC not Detonation ECU correct? I’m currently working on a speeduino for a 2zz
@natestevens499 Жыл бұрын
Best part of video 8:17
@remissiveslave Жыл бұрын
Can't find an estimate on rebuilding one. Mines definitely knocking. Faint right now but it's getting worse and I can smell metal friction up hill. Would it be cheaper to have motor rebuilt 'NOT BY ME' or swapped with a reman one or salvaged? Any ideas? Not estimates but experience based knowledge!!
@OpenLogicEFI Жыл бұрын
Unless it's a race engine and/or you have the capability to build it yourself in almost all cases a salvage yard engine will be the cheapest option. More expensive but still cheaper would be a remanufactured engine. Of all the engines I've swapped for customers or myself over the years I've had very good luck with well researched salvage yard engines. Check out car-part.com if you're in the US. It's a listing of available parts in salvage yards across the country.
@remissiveslave Жыл бұрын
@@OpenLogicEFI if it's just the block, should be able to just reconnect all the other stuff? How much time should it take a GOOD shop to swap out engine? Seems like a straightforward job for a professional, not Really much to take apart.
@OpenLogicEFI Жыл бұрын
@@remissiveslave You would want to buy the whole engine. Something we call a long block. Anywhere the oil flows such as the cylinder head, etc. Is compromised because of the metal flowing through it. But yes, anything on the outside of the engine that's working will be swapped over to the new long block. That's part of an engine swap. For a good mechanic this specific engine swap is very straightforward. Don't get me wrong, an engine swap is hard work no matter what it is. It's still 6 to 10 or more hours worth of work.
@remissiveslave Жыл бұрын
@@OpenLogicEFI ok. Going to keep this in mind. 2-2.5k really isn't bad when comparing to getting a new or pre-owned car.
@supreme_lifting02sodapop22 Жыл бұрын
Where you. Get the engine rebuild kit
@takingoutthetrash1512 Жыл бұрын
oil is as important to an engine as water to us... no matter what i do to a car or can't do to a car, i always make sure the engine have oil. i remember the early 2000s in my teen years being broke, always wanting to cruise and visit friends and girls (drink, toke, chill), riding in my mommas old 77 chevy caprice that leak oil like a mofo. i always stop by gas stations and buy cheap ass detergent oil that look clear as hell lol, and i always make sure to top it off... now i think about it, broke ass fools never help me on gas and oil, and broke ass skanks got allot of free ride lol anyway, nice build bro, im riding a 1zz-fe now, thinking about rebuilding and adding a supercharger instead.. these engine will run forever, just like hondas
@amoralgarage Жыл бұрын
I have a few questions if you can contact me about a feature for my KZbin video and also want to see if we can work together for the first vq turbo Sentra with your ems in the world
@brianconner3222 Жыл бұрын
Connecting rod bearing
@kmlumd44 Жыл бұрын
How much hp does it have b4 and after u estimate?
@OpenLogicEFI Жыл бұрын
I'm honestly not exactly sure. My best guess would be before upgrades it was 120-140hp then after it was 200-220hp.
@andrewzandstra7996 Жыл бұрын
How did you connect the fic-6 to your harness?
@terryjouannard3311 Жыл бұрын
where did you go to get the oil back into the turbo?
@OpenLogicEFI Жыл бұрын
I assume you mean the turbo oil feed? It's just a tee fitting off of the oil pressure sensor.
@terryjouannard3311 Жыл бұрын
@@OpenLogicEFI yeah it's what i meaned 😅 i'm french so i dont know all technical words in mechanic😅 so okay u just put a T on the oil pressure sensor.. that was it that I wanted to know 😁 thanks✌️
@fernandohood5542 Жыл бұрын
What are you using to polish the camshafts?
@hirampratt7995 Жыл бұрын
Stock camshaft? If so I thought the sanding off of the rust would mess with the lobes reaching the valves
@OpenLogicEFI Жыл бұрын
Ya stock cams. It's a very low grit sandpaper simply to clean and smooth the lobs. The material removed is so small it would be within margin of manufacturing error.
@hirampratt7995 Жыл бұрын
@@OpenLogicEFI interesting. I had a celcia back in the day and recently and pulling the engine to rebuild for fun. Wanted to ask if rebuilding the trans is worth it because the celicas synchros are horrible and can't handle the engines own power
@hirampratt7995 Жыл бұрын
@@OpenLogicEFI thanks!
@jessegunn2033 Жыл бұрын
Badass!!!
@JO3haNsum 2 жыл бұрын
What parts did you Re-use and which were installed brand new?
@AyeItsProphet 2 жыл бұрын
Should I go IE or Cobb.
@OpenLogicEFI 2 жыл бұрын
I think it's personal preference honestly. People will argue the one they have is better simply because it's the one they have. In the end it's going to come down to your setup and your tune working together. So I'll say I prefer the cobb unit because it's display is extremely useful and it has a lot of great on-the-fly options.
@AyeItsProphet 2 жыл бұрын
@@OpenLogicEFI thx for the tip🤙🏻
@markuswankhammer4557 2 жыл бұрын
Hello , good Job but threre are other Pistons in the Market with greater oil leacks under the oil Ring retuned to the crankshaft. The turbo is nice !!!
@joefabengineering7393 2 жыл бұрын
What's the update on this?
@lloydfranks1357 2 жыл бұрын
She Rips! Nice Job!
@vashmay9289 2 жыл бұрын
Would you write a list of tools and tubes needed to do this myself? I've already done a manual conversation and clutch change myself for my 1zzfe, love it!
@silver1407 Жыл бұрын
how difficult was the manual conversion?
@tophatvideosinc.5858 2 жыл бұрын
the music people listen to say alot about their chartacter. and this music is hard to listen to... thanks for using captions.
@OpenLogicEFI 2 жыл бұрын
I'm going to have to disagree with you on that one. I don't think one's choice in music has anything to do with a person's character nor does the music represent my taste in music in any way. It's royalty free music selected without care in less than 15 seconds because the video is about an engine build.
@yoshieewing3515 2 жыл бұрын
Runs a whole lot better than my celica. I have an oil leak issue as well. I narrowed it to an area behind the cylinder block around the timing tensioner…have to figure out what it exactly is…good job though!
@jasonr6705 Жыл бұрын
Timing tensioner oring!!
@CherylCold 2 жыл бұрын
Need this for my 1zz Elise. In for rebuild now, gonna send this to my mechy. Thumbs up!
@alexanderpetrov7027 2 жыл бұрын
Keep the receipts
@OpenLogicEFI 2 жыл бұрын
I don't understand?
@alexanderpetrov7027 2 жыл бұрын
@@OpenLogicEFI It was meat as a divorce joke, but I didn't know the situation... >>Hey, I'm doing a 2zz swap + turbo in a 2004 Pontiac Vibe! Will definitely send you a link!
@alexanderpetrov7027 2 жыл бұрын
Need to fix the fuzzy steering wheel
@OpenLogicEFI 2 жыл бұрын
Not my car. It's my ex's
@alexanderpetrov7027 2 жыл бұрын
@@OpenLogicEFI damn I wich you got the car in the breakup. And sorry to hear it
@OpenLogicEFI 2 жыл бұрын
No I leave the video up with the ending saying built with love. At least I was committed and faithful. She can keep the car to remember and be reminded who built it everytime she hits boost.
@alexanderpetrov7027 2 жыл бұрын
@@OpenLogicEFI I'd say you made your mark
@alistairmacgregor1456 2 жыл бұрын
was gonna say the preface lift 1zzfe had a major issue with burning oil as the piston rings but you got corrola pistons on,, mihale forged are the best but ya get piston ping, need sleaves, 2litre stroker kit is a cheap upgrade shorter conecting rods
@omyblaster1995 2 жыл бұрын
When I see my black Celica VVTi, I see a black panther 😎
@802Garage 2 жыл бұрын
Boss.
@bicylindrico 2 жыл бұрын
Let's do it!