Hopkins Performance Solutions

Пікірлер

@louds5505 Ай бұрын

It's not available anymore ughhh what am I gonna do now

@bigtires100 5 ай бұрын

If the idea of dual feeding the clutch pack is to add more surface area on the piston to be pressurized doesn't drilling a hole in the chamber that is being pressurized bleed off the pressure?

@BonusChip Күн бұрын

I think that's taken care of by the by the plug in the valve body. The hole drilled is to release pressure at high RPMs ~6000+ Disclaimer: I could be wrong

@samuelpeterson6038 9 ай бұрын

Psi and horse and torque? Looking at this or a whipple

@mrmrwilem7849 9 ай бұрын

VIDEO SHOULD BE CORRECTED OR AT LEAST ADDRESS THOSE WITH NO REVERSE ISSUES!!. Bur maybe they aren't installing their spraggs backwards. This from the LS1TECH pages_----------"I fixed it. The intermediate sprag was backwards. I also removed the reverse check ball. If you dual feed your '80e, make SURE to remove that reverse check ball or it WILL NOT WORK!" from maroon monster "Thanks for posting results. P.s. you don't have to remove reverse check ball. That often makes reverse engagement too rough...especially in vehicles with raised line pressure. Best thing to do is just drill the reverse feed orifice slightly larger. It will give a smooth apply that's not too aggressive but not sluggish" johnH123 is offline

@BmoreFox 11 ай бұрын

What a good time back then. Great video!

@cnobles55 Жыл бұрын

What size is your tool box that the hydraulic pump sits in?

@gabetrentham3737 Жыл бұрын

i need to know how much this cost and where i can get it done at

@kevinbmx77 2 жыл бұрын

I did this, now have no reverse, am I missing something?

@302racinmedia 2 жыл бұрын

Those were the good days 💪🏻

@slammed_stangaz3608 2 жыл бұрын

how did you set up your winch?

@johndehaven8694 2 жыл бұрын

Great video but can you make them longer?

@garyskingdom1542 2 жыл бұрын

💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽🏆 king at racing

@bubbagilbert2440 2 жыл бұрын

That's right Ford blue oval horse power no mix breed

@HanifEFIMechanical 2 жыл бұрын

Good work 👍🏼

@mikeymikey456 2 жыл бұрын

Slow ass grudge cars

@BuiltRiteTrans 2 жыл бұрын

I suppose it wouldn't hurt to drill that hole in the drum but I've never heard of the 400s and the four old ladies having the centrifugal apply issue like the 4l60 does. The only time I've drilled that hole in the direct drum is on a trans brake application. But who knows if somebody figured that it works better than so be it but I never known the 400 and 4l80 to have that issue

@302racinmedia 2 жыл бұрын

Good video man

@nickkiofetzis5667 2 жыл бұрын

i was wondering do you need to dip the t350 pump bearing into oil before fitting or are they pre greased, i am refering to the one being used in the rear of the t400

@mathewshackelford8037 Жыл бұрын

do you need to? No. Is it a good idea? yes. Dip it in the oil you have the clutches soaking in. It's not going to hurt and it will only help the bearing as it won't start off dry.

@rapidtransit8373 2 жыл бұрын

Hope you guys have some more livestream action. Looks great sorry I missed it. I subscribed and hit the bell. So I catch the next one

@anytime2136 3 жыл бұрын

Damn it !!! Silver Surfer sounds & runs damn straight. Great job the Car as a whole. Great job

@salami5903 3 жыл бұрын

Anyone know what time sign up is?

@Reggiegraves8822 3 жыл бұрын

There’s no way in hell this thing is running a full Exhaust

@wiz_lsv2600 3 жыл бұрын

Its in our blood💯

@jasonwood9683 3 жыл бұрын

? I'm putting my in a Jakes d3 trans brake and is that fine with that center support plug?

@reeceliles9151 3 жыл бұрын

Do you need this if using the HD2 kit

@mrfrock1980 3 жыл бұрын

Dats my boy BABY J.. been shit talking for years..but dat ol country boy can back every word up...#facts......FROCK

@cobyfletcher5032 3 жыл бұрын

My car

@bradykile4598 3 жыл бұрын

What a trash flagger

@HopkinsPerformanceSolutions 3 жыл бұрын

Yeah I think it was his first time, the event was good so I'm sure people overlooked that.

@bradykile4598 3 жыл бұрын

@@HopkinsPerformanceSolutions not is when he screws us out of 3rd round. And he told us hes been flagging for YEARS....

@HopkinsPerformanceSolutions 3 жыл бұрын

Hey man I just showed up to film. I'm sorry to hear that.

@dogpatch8266 3 жыл бұрын

very informative , thank you.

@jesserichardson8383 4 жыл бұрын

Yo This your Boy Jesse 3rd Shift Waffel 🏠. Next when you post T bone on my.. The fast lifestyle

@joshuasterling9596 4 жыл бұрын

Thanks for the great video. I just did all this but am now wondering what not to do in my transgo hd2 kit. Didn't realize they do it a different way?

@coleschott007 4 жыл бұрын

I followed your directions and now i do not have reverse, you didnt mention anything about that possibility

@v.e.7236 4 жыл бұрын

Quick and simple vids on easy mods for a more reliable transmission, gets my thumbs up. The hole for feeding direct clutches is another great upgrade.