The Orion Nebula

Пікірлер

@robertfox4524 20 күн бұрын

Would love to hear a full review of your thoughts on the lift, and what you would do different.

@robertfox4524 20 күн бұрын

You could bend the bracket instead of your brake line...🙂

@theorionnebula707 3 күн бұрын

@@robertfox4524 That should definitely be done too. I was trying to keep everything as close to the frame as I could.

@theorionnebula707 3 күн бұрын

@@robertfox4524 Definitely in the works! I'm getting bigger tires soon and I'll see how the lift holds up to them.

@scubadude64 26 күн бұрын

Very well done! I'm in the middle of doing that same lift myself

@theorionnebula707 25 күн бұрын

It has been a great lift!

@gofasters1 Ай бұрын

Great Video, Anyone experiencing vibrations while idling at a stop with the vehicle in drive and foot on the brake. When I put it in park the vibration subsides. This started after the install. Thx

@theorionnebula707 Ай бұрын

Mine wasn't doing it at first. This has been installed about a year now and I just started having a little rattle, at idle, when it is cold. I'll probably crawl under there and tighten it up. Hopefully that fixes it.

@gofasters1 Ай бұрын

I figured out the vibrating was the bolts that go up into the motor mount. They came loose. Those bolts were a nightmare to tighten down because you have no room to turn a wrench and socket won't fit between the brackets and control arm. If they come loose again I'll take the control arm off.

@theorionnebula707 Ай бұрын

@@gofasters1 I agree they were. I'll have to hit mine again then. I might throw some loctite in them!

@jessicagaughan7490 Ай бұрын

Way to go wearing your ear protection! Fun video. Now I feel confident I can install a lift kit. <3

@theorionnebula707 Ай бұрын

I already can't hear enough! I'd like to keep my eyes, ears, and fingers so saftey first! Time to put a lift on the electric spaceship and go offroading?

@damonish 2 ай бұрын

nice lil friendly guy in the background over orions head at 34:50

@theorionnebula707 2 ай бұрын

((_)

@UnicornsDontHaveNipples 2 ай бұрын

I’ve been driving this lift for about two months and am happy with it. It feels stiffer than stock in a good way. I’m not sure if I had a bad stock shock before, but I have way less body roll on sharp turns . I also used the geo brackets. I decided to pay a shop to do it. I could’ve done it myself and have in the past, I just didn’t feel like dealing with it or running into something and not having the correct tools. Nice vid . It’s always Nice to have these how to videos floating around.

@alsokoopattack 2 ай бұрын

Nice video! I can't wait to see the stars! 🌃

@theorionnebula707 2 ай бұрын

🌠

@bobgone7865 2 ай бұрын

How long did that install take you all told? I'm always impressed in these videos that you get all this work done without needing to use 'bleep' for language constantly, haha. Important time stamp for future generations 31:12

@theorionnebula707 2 ай бұрын

It was a full 12 hours the first day. Then I had to drive around and find a bolt that the kit sent wrong. Then had to find a better impact. It was a full 2 days to get it all done. I even had experience basically doing this to the old Jeep too. Lots of little things to do!

@bobgone7865 2 ай бұрын

@@theorionnebula707 The things men do for a couple inches.

@theorionnebula707 2 ай бұрын

Must be bigger, even if it makes it worse!

@forgingluck 2 ай бұрын

What's the secret to getting that 25mm m10 bolt to go in the engine mount clips? It's refusing to get started on either side for me. It's like it's 5mm short

@theorionnebula707 2 ай бұрын

They might have sent the wront size bolt. Mine took a little wiggling, but all the bolts were long enough. I even crawled under there today to have a look and they are plenty long.

@forgingluck 2 ай бұрын

@@theorionnebula707 thank you very much! Found the right ones at O'Reilly. Ends up the ones they sent had the wrong thread pitch and were 5mm short

@forgingluck 2 ай бұрын

Got it installed and everything else fits so perfectly. 💯

@theorionnebula707 2 ай бұрын

@@forgingluck Time to get out and use it now!

@truebalsamhogs 4 ай бұрын

Thanks for making this video. Laughed at your jokes too. Good sense of humor.

@thebullandarcher7964 6 ай бұрын

So how’s it holding up? Would you recommend or go with something better?

@theorionnebula707 6 ай бұрын

I'd say worth the money. It has some scratches on it and I've heard it take a few bangs. It beats a hole in the oil pan for something so inexpensive! I'm also by no means a "hardcore" off-roader. I trust it to get me though anything and keeping my oil pan intact though.

@mathlacroix6674 7 ай бұрын

What is the mount name?

@theorionnebula707 7 ай бұрын

I see my link is broken now. It is though EVO search " Evo JK air compressor mount." This link might work. tinyurl.com/34j8tmwh

@nordland2235 9 ай бұрын

I caught that bolt that you missed....thanks for the video.

@theorionnebula707 9 ай бұрын

Glad it helped out! I hope I remembered to get that bolt later!

@bobgone7865 Жыл бұрын

i seent it!

@Koopattack Жыл бұрын

Great video, I'll have to do this on my Jeep Wrangler Hard Rock Edition!

@theorionnebula707 Жыл бұрын

Time to get one!

@bobgone7865 Жыл бұрын

Dremel is worth, Dremel is life. I wasn't sure when I first plopped $60 down for mine a long time ago, but I LOVE that thing for my hobby projects.

@theorionnebula707 Жыл бұрын

Yeah! I use it a lot now. I just had to work it in to replace struggling with a utility knife all the time.

@bobgone7865 Жыл бұрын

Absolutely gorgeous. Quite enjoyed this, can't wait for more Jeep update videos as well. Keep it up my man.

@theorionnebula707 Жыл бұрын

I've got a pile of videos on the way. Everything from "How to Make Your Vehicle Get Worse Gas Mileage" to "How to Miss All Your Action Shots." Stay tuned!

@joeb.1724 Жыл бұрын

Part number for that rear diff gasket? You buy it straight from Lube Lock? Thanks!

@theorionnebula707 Жыл бұрын

I got it though my local Jeep shop. Here are some amazon links. This is if you have a dana 44 rear, amzn.to/45o03LT . Part number LLR-D044. This is Dana 35 rear, amzn.to/43nkZ3T . Part number LLR-D035.