Пікірлер
@raymondsoriano7754 2 күн бұрын
Which is more durable internal parts and gas efficient cyma EMG cgs or G&G mgcr?
@EndeX_Airsoft 3 күн бұрын
Great video! You mention using the savings from not buying a TM to upgrade the N4. Any chance you could do a follow up with recommended upgades? Id like to now the performance difference with a longer barrel and NPAS for instance. Cheers. 👍
@YekKhaiChong 9 күн бұрын
My Noveske N4 is also black gen 2 cyma platinum, it cannot use pmags or tm spec mags , it uses the polymer lancer mag…. The type of gbbr is from the cyma platinum if I remember correctly 🙏🍀🍀🍀
@DDAIRSOFT-tech 8 күн бұрын
Interesting I have never had the Noveske N4 not fit the TM and GM mags. I know that depending on the Gen the Noveske Mag dont fit Slandered TM lower receivers.
@YekKhaiChong 8 күн бұрын
@ my Gbbr damaged the feed lips on the p mags & Tm spec mags ….. feed lip massacre or something along the lines
@DDAIRSOFT-tech 6 күн бұрын
interesting. I currently have the Gen 3 in my hand and I haven't seen this happen at all on the Gen 3s so I am hoping that they have resolved the issue.
@YekKhaiChong 6 күн бұрын
@ mine is not gen 3
@INSTASTABZ Күн бұрын
@@YekKhaiChong Yours is cyma, its not same as double eagle
@airsoftattic 9 күн бұрын
That’s a title only appropriate for a 5+ years old gun..
@DDAIRSOFT-tech 9 күн бұрын
Thanks, still new to this whole content creating figuring it out as I go along. 🙂
@airsoftattic 8 күн бұрын
Great video, great intro and info!
@ymarflex1460 9 күн бұрын
noice intro
@DDAIRSOFT-tech 9 күн бұрын
Thanks bud appreciated 😆
@MartinJHarris 10 күн бұрын
I have 3 Noveskes 1 is left standard length just changed the bucking... barrel and nub... the other two, one is for CQB down to a 7&3/4" barrel the other is modded to a DMR with a 18" barrel... using the Gun modify NPAS nozzle and the SP Systems HPA magwell adaptor all three operate on 100 psi but adjusted with the nozzle to the correct joule limits using 0.36g bb.
@DDAIRSOFT-tech 9 күн бұрын
Intersting. I am building a DMR MWS system atm and slowly getting the FPS up to a DMR limit. I want to stay away HPA as my friend who I am building it for done run HPA anymore. Once I have a system that works ill probably make a vid on it. Other wise recently built a PDW MWS and it's shooting very nicely. 😆👌
@MartinJHarris 6 күн бұрын
If doing milsim I'd stick with gas... but being out gunned by someone with 200+ capacity mags on a skirmish site... so I use the HPA adaptor and run EPM1 short mags so at least nearly at the same bb count
@DDAIRSOFT-tech 6 күн бұрын
Haha nice, I use to run it with HPA and EPM1S mags and that was great. Until I blow the nozzle 🤣, had the PSI set too high then rattling it on Full auto lol. I am actually heading to my first Milsim this weekend and running my MP5 NGRS so that should be good fun.
@2crakd 11 күн бұрын
I mean the Double Eagle Noveske N4 GBBR is only a little over a year old, over 2 years if you add pre production. It's a pretty good. It's MWS so...
@DDAIRSOFT-tech 11 күн бұрын
Aye at the end of the day it's MWS but waaaay cheaper 🤣
@uzzy1364 8 күн бұрын
@@DDAIRSOFT-tech its not technically cheaper then the cheapest TM mws if you want the same performance. Mainly because the inner barrel isn’t amazing. And once you change that the nozzle needs to be replaced so you can install an npas. Ignoring that however the stock mag is a paper weight and just replacing that means you’re only saving £20ish compared to a TM m4a1 variant. I will say you do get a better hand guard though with mlock and trigger so there is that benefit.
@DDAIRSOFT-tech 6 күн бұрын
aye It's mainly for people who are not happy with the TM triggers and wanting them upgraded. They are particularly fiddly and often people get tech to do them, and with parts and tech fees it takes quite a bit of money to get it to potentially what the customers want - a crispier trigger, which the N4 already have. other than that just get the stock rubber changed and you are grand. I don't think the stock barrel is too bad if you are just playing CQB, but you are taking it outside then yeah get it changed for a longer and tighter one.
@Redstonemelon 13 күн бұрын
That was an incredible intro, great shots and loved the smoke too!
@DDAIRSOFT-tech 13 күн бұрын
Thanks man Will try to do more of them 🤣
@gregoryfranks7347 14 күн бұрын
I got the Helios because I wasn't using the stock that came with it and I also don't like the 300 blkout just my preference but I see you have taste and got a black one. I think the fit and finish so far is as good as any of my krytacs
@DDAIRSOFT-tech 13 күн бұрын
Aye it's a high quality gun for how much you pay for it. Honestly at £350 the quality of the N4 externally and internally is unbeatable
@gregoryfranks7347 14 күн бұрын
yes, I adore mine like its a child I reared from birth that isn't a fuck-up. no its my 1 of 2 first gbbr's I bought. I got a VFC ump at the same time and I like the ump but no aftermarket support but my n4 with its surefire , lvpo, sandman and a custom g&g stock. I get withdraws if I'm away from it too long. do you have any suggestions other then upgraded springs everywhere and a zet plate. I do have a flat trigger shoe coming for it.
@DDAIRSOFT-tech 13 күн бұрын
Yes I love the Noveske N4 and I cant wait to get my hands on a Ghetto Blaster to see how it compares to the N4. If you are looking to upgrade springs then I can recommend the Angry gun 110% or 130% buffer spring and if you are looking to upgrade spring in your trigger the Dynamic precision spring set I have had great experiences with.
@michalmichalsk 16 күн бұрын
it looks like real gun. and thats the problem. some idiot will try to carry it on street. when someone pulls a gun on me that looks very real like that, I don't wait and i am shooting a real gun. and that is very disturbing and dangerous.
@TheGun311 21 күн бұрын
nice can you teach us how to upgrade the hop so can handle 0.32+ bbs
@DDAIRSOFT-tech 19 күн бұрын
Of course, I can certainly do a video on some pistol hop upgrades. Although the TM Gen 5 is hoping 0.32g bb beautifully stock. I will get that video on my list 👍
@ThatKerzyBoy Ай бұрын
Thanks for sharing 🙏🏽 Question - do you say “angry gun Npas nozzles spring” Or was it something else ?
@DDAIRSOFT-tech 29 күн бұрын
apologies I am not sure that you mean. So I normally use the Angry Gun MPAS nozzle for most of my builds as it's fairly fool proof and works a treat, and it has a fairly strong nozzle return spring as well so it's another positive about the part. I hope this answers your question.
@HughJC Ай бұрын
Good video tks
@DDAIRSOFT-tech Ай бұрын
Glad you enjoyed it 😆
@Achromedynex Ай бұрын
Apparently due to legal reasons TM can't make Glocks anymore
@DDAIRSOFT-tech Ай бұрын
That's interesting, I have not heard of that, but with TM not asking for permissions I am not surprised. I will do some research and maybe do a video once I know more what's going on.
@Achromedynex Ай бұрын
@DDAIRSOFT-tech It was never confirmed but the current situation seems to fit in, there hasn't been another batch of Glocks from TM for a long time
@DDAIRSOFT-tech Ай бұрын
if that is the case then it's upsetting as I honestly think the TM glocks are the best in the market., with VFC close behind.
@Achromedynex Ай бұрын
@@DDAIRSOFT-tech yeah that's the feeling everyone has now, it would be a shame if they can't be made anymore
@halogie9289 Ай бұрын
Thank you for the guidance! Happy to see a GLOCK airsoft channel 😉
@DDAIRSOFT-tech Ай бұрын
You're very welcome, I mainly focuses on the Gas Blowback area so plenty more to come.
@halogie9289 Ай бұрын
Does TM have the Glock 19 version? Impatiently waiting for the SRC/Umarex Glock 19 Gen 5 MOS version. I have the VFC/Umarex version, but I’m not impressed… Shot a couple of magazines with it, and the slide stop is already wearing out…
@DDAIRSOFT-tech Ай бұрын
Yes mate TM has G19 gen 3&4. Again they seem out of stock in most places. I wouldn't recommend SRC pistols as the quality are generally sub par and sourcing parts when they do go are a pain in the ass as parts that you think should be TM compatible are not... lol 🤣
@DDAIRSOFT-tech Ай бұрын
Here are the links to the parts: boomarms.com/collections/detonator/products/detonator-cnc-aluminum-g17-gen5-mos-slide-set-for-tokyo-marui-gbb-series?usf_sort=bestselling boomarms.com/products/cowcow-technology-ss-guide-rod-set-for-tokyo-marui-g17-gen5-gbb-series boomarms.com/products/detonator-cnc-aluminum-14mm-ccw-threaded-outer-barrel-for-marui-g17-gen5-mos-gbb-series boomarms.com/products/bomber-t-style-magwell-for-tokyo-marui-g17-gen5-gbbp-series boomarms.com/products/pro-arms-tritium-steel-suppressor-sight-for-marui-g17-gen5-mos boomarms.com/products/pro-arms-130-air-nozzle-return-spring-for-marui-tm-g17-gen5-mos-gbbp-series boomarms.com/products/cowcow-technology-enhanced-piston-head-for-tokyo-marui-g17-gen5-gbb boomarms.com/products/pro-arms-aluminum-slide-set-for-marui-tm-g17-gen5-mos-gbbp www.firesupport.uk/laylax-nineball-tokyo-marui-gas-blowback-g17-gen5-mos-non-recoil-2way-outer-barrel-silver.html boomarms.com/products/bomber-cnc-aluminum-rmr-style-adapter-plate-for-tokyo-marui-g17-gen5-airsoft-mos-gbb Part 2 link: kzbin.info/www/bejne/qHioaptriK2sm80
@oskarstanczyk9489 Ай бұрын
Where can I buy it in europe ?
@DDAIRSOFT-tech Ай бұрын
Sadly, I am not too sure about the situations in Europe. These are getting quite rare and TM isn't making another batch for a wee while. But I'll try to keep people updated as soon as I hear anything.
@EditorKalandr__ Ай бұрын
I came.
@HK-wq1ei Ай бұрын
I love mine. Replaced a WE Glock 45 MOS that was and is a piece of shit.
@DDAIRSOFT-tech Ай бұрын
Haha WE can be good tbh I had couple in my time but TM is just better 🤣
@HK-wq1ei Ай бұрын
@DDAIRSOFT-tech mine had a problem with slide catch being asymmetrical, which resulted in it not locking back. Slide wear due to pot metal also was extreme, eroded slide completely in less than a year so even if the slide catch wasn't asymmetrical it wouldn't lock back because of that either (i replaced the slide), then the trigger broke, wouldn't reset anymore.
@DDAIRSOFT-tech Ай бұрын
Ah man yeah that sucks. The quality just isn't there. I have had WE pistol giving me issues right out of the box. They are hit and miss. But I think if your plan is to upgrade everything in a pistol, we might not be a bad shout as it's cheaper on average, and most of them are TM conpatiabel.
@prowoto Ай бұрын
agh even airsoft world are out of stock now
@DDAIRSOFT-tech Ай бұрын
Ahhh that's a shame. I'll be keeping a eye out on any that come in stock. If I find them I may drop info on them in future videos. 👀🤣
@69Clay420 Ай бұрын
I have a real one
@Magpul55Grain Ай бұрын
Is this a new release from Tokyo marui?
@DDAIRSOFT-tech Ай бұрын
Yes mate. This is the "new" release. It's been out for a wee bit ( I think came out in 2023 might be wrong) but stock availability has been so rare only now people have been able to get their hand on. 👍