Frank Harbin

Пікірлер

@elit3m3xsoldi3rs 8 күн бұрын

En la base o fondo de el portaequipaje hay algo duro o resistente? O si coloco peso se hundirá y terminará descansando sobre mi techo?

@franklharbin 7 күн бұрын

Not really. There is a flexible piece of plastic as a recall (I sold this years ago), but really the main supports are the crossbars of the car. The material doesn't stretch that much, and there is a weight limit.

@bl7127 9 күн бұрын

If it helps anyone else, this is the Moen Model 4570 Monticello Two-Handle Bath Faucet. Great video. Thanks.

@cloudstreets1396 Ай бұрын

What does the harness do? Does it bypass the micro switch?

@franklharbin Ай бұрын

@cloudstreets1396 not sure about bypass. It worked for a few months, but then quite. I think it might be like an old Dodge fusible link. Still dealing with the issue.

@cloudstreets1396 Ай бұрын

@@franklharbin so, is your issue not related to the micro switch when the shifter is in the park position?

@franklharbin Ай бұрын

@@cloudstreets1396 it is. I just haven't found a permanent fix.

@cloudstreets1396 Ай бұрын

@@franklharbin I am ordering the micro switch. Desolder the old one and then solder the new one in place.

@susanl4198 Ай бұрын

The 5.5mm allen wrench isn't loosening the faucet. Any suggestions?

@franklharbin Ай бұрын

@susanl4198 I'm assuming you've tried going up and down a couple sizes just to make sure. Try to make sure there is some tension on both the faucet and the nut. It's possible the nut has stripped ,and you'll have to just cut it out.

@susanl4198 Ай бұрын

@@franklharbin Thank you so much. I'll try your suggestions 😀

@palapapa0201 Ай бұрын

That sink is absolutely filthy

@michaelmappin4425 3 ай бұрын

My attachment rings were under the C clips and no room to get them off. I had to use a razor blade to slash my wrists. 😢 What a job for a guy who's very good with plumbing. I'm sure the next one will be easier

@rocketman3534 6 ай бұрын

I dont understand what you are actually turning with the Allen Wrench

@franklharbin 6 ай бұрын

There is a "nut" that keeps the faucet tight to the counter that you have to loosen using the Allen. In the video, once I get faucet to come off you can see two "pipes" sticking up. If my memory is correct that nut you are loosening up is the one in the back (closest to the mirror).

@user_uif_ghg_wer_das 8 ай бұрын

I think you should replace the Part # 84955379, the shift to park switch.

@christyrussell704 Жыл бұрын

Thank you very clear and simple instruction.

@GS-rz8qo Жыл бұрын

Part # 13534328 (for a Malibu) will fix the issue. It's the entire shifter assembly.

@alnaharaimruiz1518 Жыл бұрын

Thank you very much for taking the time to do this video. I was able to follow your directions

@trainstain4876 Жыл бұрын

Fu king thank god for you

@davidnle Жыл бұрын

I took it off and looks like the bottom ring of the left and right are all rusted. What do you use to spray them to take them off? thnks

@franklharbin Жыл бұрын

Most of mine was so rusted that it broke with just a little pressure from either my hands or pliers that I was able to remove. But also would consider using a punch (tool) as well, just be careful as the pieces will become flying objects.

@mariaatwood2249 Жыл бұрын

Saved me a big headache!

@mikethompson3534 Жыл бұрын

You should’ve thrown away that scummy sink also

@garystrittmater8258 Жыл бұрын

Always nice to learn something even if it's easy because i honestly don't trust the garages around me! I took automotives in high school but we didn't have pans under our cars back then.

@jprovenzano87 Жыл бұрын

Did this fix the issue?

@franklharbin Жыл бұрын

No. I'm actually working to find a better fix, but it did help for several months.

@omyoday9593 Жыл бұрын

Wow ! Thank you so much for this video ! Taking this old faucet out was NOT intuitive, at all. I had been fussing with it for over an hour. I had seen some other more recent installation instructions, and saw the allen wrench idea, but had stuck is several wrenches (SAE I guess) I had on hand, and nothing fit. It seemed like that was not the right approach. I went to the store and bought a 5.5mm allen wrench, and VOILA ! it worked instantly, and I was able to disassemble, and get the new one installed from there. Absolutely would not have figured this out without this video. Thanks again !

@sararaxter2706 Жыл бұрын

I cannot, for the life of me, get the spout off. I've got the right size Allen wrench but it WILL NOT BUDGE. I've tried a hammer, wrenches, you name it and nothing. I've got everything else taken apart. Any ideas?

@franklharbin Жыл бұрын

It's been a minute, but if memory serves, there were two holes where the allen wrench would fit into. Have you tried both? Also, given how old these models are at this point, might have to consider that the bolt has stripped out, and you might have to cut it out.

@chwparker Жыл бұрын

Sooo why not just SHOW US how to put it together? That's actually what I was trying to find, but the only results I received were reviews!

@lodgefamlodge2586 Жыл бұрын

Guys please called a plumber to get the job done.

@KarlaJorge Жыл бұрын

When this tap drips what is the part I need to change?

@franklharbin Жыл бұрын

Mine never dripped so I'm not 100 percent sure, but I've heard other talk about having to replace the cartridge.

@loveenycarreno8648 Жыл бұрын

Thank you very much! My fiancé always takes care of this for me but he’s working overtime to make money for us so I’m handling it this time. This video is so helpful!

@jimstaszko1675 Жыл бұрын

It would be awesome while filming these you include the oil filter model number you used. Thanks.

@jimstaszko1675 Жыл бұрын

Crush washer?

@eostrike Жыл бұрын

Thank you for sharing this here. I was going to break my handle off until I saw your video. I was able to get the knob off with seconds.

@filmismorefun Жыл бұрын

Man you are a lifesaver! Thanks so much. I really appreciate you uploading this.

@gotonkar Жыл бұрын

Thanks for calling out the 5.5mm allen and c-rings. Those were the two valuable pieces of info I needed to carry on my journey. Also nice to know it's a 'Monticello'

@DR-mp4gv Жыл бұрын

.....mahaaaaha!!!... the Giant pipe wrench which I would only use to remove two inch diameter steel gas pipe:-) LOL

@jehanzeb1970 2 жыл бұрын

The lock washers were rusted and frozen, had to dremel them off. Thank you for this very helpful video!

@stephaniecaldwell2352 2 жыл бұрын

Thanks so much for making this video! Step by step you gave the exact instructions that I needed!

@justincormier834 2 жыл бұрын

I was stumped. Finding this video was a HUGE relief!

@garyeaton 2 жыл бұрын

This video was a life saver. Never would have known an allen wrench was required. Thanks for posting - much appreciated!

@kelseyskaarva7574 2 жыл бұрын

any more tips on getting the O rings off I have tried everything to get them to snap apart

@franklharbin 2 жыл бұрын

If they are that rusted, you may have to break out a hammer and punch/chisel. Some mild heat could help too, just be careful not to damage your countertop.

@okanscott4733 2 жыл бұрын

After hours and hours of trying to figure this out your video saved the day. Thanks!

@TheWolfmanG 2 жыл бұрын

5 years later.... how are they? Did they crack? Explode? Just plain junk? Or a great purchase?

@franklharbin 2 жыл бұрын

Sold the bike with the bags about three years ago. They never cracked while I had them, but locks were never smooth, and emblems would fall off. The plastic is fairly thin. If you leave your bike outside I'd have to guess that they would crack over time (based on other things I've owned made out of similar thin plastic). My bike now is an 03 Harley FXDL, and when I bought bags for it, I did NOT buy these again.

@VayaconChupacabra 2 жыл бұрын

Perfect!! Solved my puzzle or me. Thanks so much!

@davekirk9241 2 жыл бұрын

Thank you so much for posting this. I never would have known about that 5.5 Allen wrench step!

@paulcamalin5236 2 жыл бұрын

I have seen a lot of badly designed faucets but this one tops them all. Even with your instruction I could not get it uninstalled. I had to use a grinder to cut everything off even the drain. It took me literally 10 minutes to install the new one in. What were they thinking in the old days?

@PJL7095 2 жыл бұрын

For whatever reason I can not get the hot handle off. It spins but won’t pull up. The handle was broken off hence the reason of replacing the whole faucet. I’m about to sawzall the bastard if no one give me a clue

@franklharbin 2 жыл бұрын

No idea there man. Good luck.

@thealanguy4547 2 жыл бұрын

Dude, thank you SO MUCH!!! Was pulling my hair out trying to get a similar one (and less intuitive) to this one off... had to use tin snips and pliers to cut and bend the washer off as the C-clips were super stuck.

@ThatBikerDad 2 жыл бұрын

how was the bounc and wobble on the bags?

@franklharbin 2 жыл бұрын

The bags seemed fine. Obviously there was a little less bounce with some weight in the bags, but overall they were fine. Please note I sold this bike about three years ago from this reply.

@TheBatosai04 2 жыл бұрын

OMG, Thank you man! You saved my life. But as for Moen... F* the designer who wanted to create a new, elaborate, and unnecessary way to fasten the faucet to the sink.

@sbrookssc 2 жыл бұрын

You saved me a lot of time figuring out how to get the old faucet removed. I am pretty handy and do a lot of home maintenance, but I had never seen one of these faucets. My wife wanted them replaced, and I spent about 30 minutes trying to remove the first one without a lot of success, I did not know about the 5.5mm allen wrench or the locking rings once you get it loose. Great help, so thank you !!