JMS Grind-It-Out

Пікірлер

@adohsh5425 2 күн бұрын

I knew when I was yanking on my mirrors there had to be another way. Thank u

@grind-it-out Күн бұрын

Yesss! Thank you 💯👍🏼😎

@Trucker_Bud 2 күн бұрын

That triple square socket is that the same one that’s used inside the door for the rod that’s mounted on the pillar? Or is it a different socket?

@grind-it-out 2 күн бұрын

Good question I don’t know. But it is a 14mm triple square. So if you have it it’s good. Not sure about the pillar rod. But Audi loves these bolts so I wouldn’t be surprised. Thanks for the comment I wish I had a more specific answer. 👍🏼💯😎

@Trucker_Bud 2 күн бұрын

@@grind-it-out gotcha thanks for the response. I’ve never seen that type of screw before so when I seen this in the video I had to ask😅. The one in my wife’s Tiguan keeps getting loose. I’m going to buy to test it out

@grind-it-out 2 күн бұрын

Actually they are 1 time use bolts but lock tight can get you another use. They are stretch bolts or whatever you call them. Actually you can pick the socket up at oreilly auto parts. I think I got 3 different sizes for 10 bucks.

@Trucker_Bud 2 күн бұрын

@@grind-it-out gotcha thanks a lot 🙏🏾

@grind-it-out 2 күн бұрын

💯

@Bigdaddyhognuts89 3 күн бұрын

Ive been lazy and have been getting it done at a shop with a groupon. They finally figured out they were undercharging me on the oil (hooray European life). Back to doing it myself. The engine flush was a good touch definitely much needed on mine (148k).

@ethanwasme4307 4 күн бұрын

I'm gonna do this to my house and vanity mirrors too lol so cool 😂

@grind-it-out 3 күн бұрын

Absolutely it works the same ha! 💯👍🏼😎

@AhmaadLea 5 күн бұрын

Glad you did the Driver side without the sensor. This is the only video I've come across that shows the driver side. I cut the sensor before i came to this video because i didn't see it on the current ones. I'm just glad I didn't make a mistake.

@grind-it-out 5 күн бұрын

Nice! Thanks for watching and it sounds like it worked out ok for you. Some models have the sensors and some don’t. Appreciate the comment 💯👍🏼😎

@reeserides7757 5 күн бұрын

What wheels and tires are those

@grind-it-out 5 күн бұрын

ESR is the wheel brand. Nitto tires.

@jbm0866 6 күн бұрын

#1 and #4 are base model problems. Like most cars if you go up in trim levels you get more sound deadening, and in this particular car going up to SE gets you some decent fake leather that wears well and is fairly easy to clean. #3 and #5 are pretty much par for the course on any car these days, especially the under body panels.

@grind-it-out 5 күн бұрын

That’s exactly right. You get what you pay for. I appreciate the comment and thanks for watching 👍🏼💯😎

@eldorfthe_wise129 6 күн бұрын

I'm only 5 foot 5 inches tall and I have a 2020 Santa Fe. I cannot reach the passenger-side blade, even hooking myself up in the driver's door. Can the passenger side blade by replaced in the "stowed" position or am I going to need a step stool to get up there?

@grind-it-out 5 күн бұрын

Good question…. It’s possible yes in stowed position. It’s my parents vehicle and they live out of state. I always maintain their cars when I visit them. But a step stool is probably your best bet. Thanks for watching I appreciate it. 👍🏼💯😎

@GingerAvenger605 7 күн бұрын

Is the stock exhaust 2.25 or 2.5?

@grind-it-out 7 күн бұрын

2.25

@rajgihanify 9 күн бұрын

thanks for the video, very help full

@grind-it-out 9 күн бұрын

You bet. Thanks for watching 💯👍🏼😎

@danieldf3149 9 күн бұрын

That was easy thanks a lot!!

@grind-it-out 9 күн бұрын

You bet! 💯👍🏼😎

@ilijasic1 10 күн бұрын

Hey, love your videos..... Especially these wheels you got. Did you end up fixing the slight wheel exposure from the rim? If so, how? I want to get these for my '18 passat GT, not sure to go 19s or 18s though.

@grind-it-out 10 күн бұрын

Yea I’ve not done anything yet but coilovers will come soon then I’ll pull out fender a little in front. I’d go 19’s for GT but 18 has better ride. I appreciate the compliment. Thanks for watching 💯👍🏼😎

@user-pu5kd1tk6f 10 күн бұрын

Anyone know how to put transmission oil into a 2022 VW Passat. I accidentally emptied the transmission oil vs the engine oil:(

@grind-it-out 10 күн бұрын

Ohh my …. Well I’d recommend taking it in to get transmission service. Especially a 2022. They will flush it and do everything

@user-pu5kd1tk6f 10 күн бұрын

I love your videos!!!

@grind-it-out 10 күн бұрын

Thanks I appreciate that. And thanks for watching 👍🏼💯😎

@dickvanrossum4174 11 күн бұрын

Pls Sel

@zaymarquez4575 11 күн бұрын

Is the torque wrench necessary or can I do without?

@grind-it-out 10 күн бұрын

Yes you can do without. I’m just trying to show the proper way. Just don’t over tighten the guide pin bolts.

@zaymarquez4575 10 күн бұрын

@@grind-it-out is it better just to hand tighten the guide pins?

@grind-it-out 10 күн бұрын

No tighter than hand tight. Just slightly over snug. Half turn after it stops with ratchet

@spencerd1079 12 күн бұрын

Solid video, but you used about 1000x more brake lubricant that you needed to. All that grease is just going to collect dirt, sand and road debris.

@grind-it-out 12 күн бұрын

👍🏼

@therockworshipcenter2848 12 күн бұрын

Thank you much!

@grind-it-out 12 күн бұрын

You’re welcome. Thanks for watching 👍🏼💯😎

@auto117666 12 күн бұрын

6:25 That’s what she said!

@grind-it-out 12 күн бұрын

🤣

@josearriaga9081 13 күн бұрын

Ty!

@grind-it-out 13 күн бұрын

💯😎👍🏼

@constantinorosas2032 14 күн бұрын

Great video very helpful

@grind-it-out 14 күн бұрын

Thanks very much for watching. I try to make it simple. 😎💯👍🏼

@Bigdaddyhognuts89 15 күн бұрын

I can't find the oem rotor sizes

@1613olee 16 күн бұрын

Thanks ❤

@grind-it-out 16 күн бұрын

👍🏼💯😎

@mbrokaw88 17 күн бұрын

This helped a lot! Got my 2017 ready to roll with new plugs and coils. Thanks!

@grind-it-out 17 күн бұрын

Good knowing I helped. It’s not to bad of a job. Happy to know your doing it yourself. I appreciate the comment and thanks for watching 👍🏼💯😎

@olegpokotilov2613 18 күн бұрын

Great video very detailed good to know I will need different tools (for rear) Great channel as well

@grind-it-out 18 күн бұрын

Thank you for the nice words 😊. The rear brakes are more difficult. Try to get the rotors out without removing the carrier. Those triple square bolts are a challenge. Good luck and thanks again 👍🏼💯😎

@olegpokotilov2613 13 күн бұрын

@@grind-it-out everything worked out great with plenty of penetrating fluid & long/extended rachet handle Thank you again

@grind-it-out 13 күн бұрын

Awesome!!! Thank you 💯😎👍🏼

@fabio4ever667 19 күн бұрын

How did you wrap under the mirror?

@grind-it-out 19 күн бұрын

That’s just the turn signal glass. Plastic or whatever. I just layed hex tint down on it. Super easy. VViViD hex tint.

@grind-it-out 19 күн бұрын

Ohhhh your talking about the chrome on the door. Yea just had to take my time. It kinda sucks but I did it. It’s far from perfect but it looks ok. Get your razor knife in there and cut away

@markchase4513 23 күн бұрын

Thanks man, I now know how not to to hang caliper so it kinks hose

@grind-it-out 23 күн бұрын

👍🏼

@julietucker7011 25 күн бұрын

But how do I get my cables out of the trunk

@grind-it-out 24 күн бұрын

Pop the trunk or go through the back seats.

@hellsk100 25 күн бұрын

Make sure you pump them brakes after the job otherwise youll have no brakes for a couple or seconds 😂

@grind-it-out 25 күн бұрын

Absolutely 💯

@mizzot3622 25 күн бұрын

Do you have a video on cleaning the AC evaporator or other parts of the AC system? I changed my cabin air filter and it still smells musty.

@grind-it-out 25 күн бұрын

Unfortunately no. Probably you should flush it out. I don’t have a video on that. AC is not my strong skill. 👍🏼😎

@deangelojohnson914 25 күн бұрын

This man killed this video! Slow and steady and very detailed. This video gave me confidence to try doing the brakes myself. Thank you so much!

@grind-it-out 25 күн бұрын

Ha! Appreciate that. And thanks for watching. Rewarding doing it yourself. Great job !!! 👍🏼💯😎

@HNEl-dc8mt 26 күн бұрын

The ET is -10 .. passat is normally et45 to 48 … ur suspension system is getting cooked

@grind-it-out 26 күн бұрын

👍🏼

@markchase4513 26 күн бұрын

Don't tear plug boot, they only come with a coil. Aftermarket boots are crap.

@grind-it-out 26 күн бұрын

Gotta be careful and apply dielectric grease

@MementoMori-cs3se 27 күн бұрын

Whaaaat you in Houston 😎

@grind-it-out 27 күн бұрын

Yep. Hot Houston. Lol.

@MementoMori-cs3se 27 күн бұрын

BTW checkout Billet Technology they make aircraft aluminum under hood parts for these cars

@MementoMori-cs3se 27 күн бұрын

Thanks for this video it helped a ton, I just go my intake back I had it powered coated Transparent Copper 😎

@grind-it-out 27 күн бұрын

I’ll bet it looks nice! Thanks for watching and hopefully you’ll enjoy the intake. 👍🏼💯

@carsonchambers5617 29 күн бұрын

Old video I know but any clue if the nice sealed S&B air intake for the TDI will work for our TSI’s? I can’t find an ACTUAL cold air intake (aka has to be sealed) for the life of me.🙃 Someone said it has a barb on the tube and I’d have to figure out if I have the extra air intake line thing. I gotta get one of those nice 3” down pipe, and the upgraded cooler inlet pipe. Some of the forums said those are two really constricting parts for these.

@grind-it-out 29 күн бұрын

Good question. I’m actually not sure about the TDI Intake will fit. You can get a high flow filter for the stock intake. It’s like $50. It’s a K&N filter. I wish I had more info. But I love this intake from CTS. And they make a nice downpipe also.

@Bullygoat1 Ай бұрын

Just gave me hope on changing my spark plugs and coils myself and save a bunch of money but how do I know which coil is bad ?

@grind-it-out Ай бұрын

You can do it. As far as the coil. Switch it with another. If you get a bad cylinder reading it should change to the one that’s got the bad coil. If the second coil is bad, switch it with the first one. That will verify it’s a bad coil. If nothing happens then it’s a cylinder issue or bad plug.

@jdt6766 Ай бұрын

Got mine.. nice little pocket carry

@grind-it-out Ай бұрын

Yes thanks 👍🏼💯

@eleets82 Ай бұрын

Nice use of the defroster lines to section it off. Also invisible glass cleaner is a great cleaner, far superior to windex in my opinion

@grind-it-out Ай бұрын

Yes I agree. Invisible glass is good stuff. Thanks for watching 👍🏼💯😎

@dekillerjoy5392 Ай бұрын

Is a 1.8 tsi 180hp good engine or not?

@grind-it-out Ай бұрын

So far it’s great. Yes if you do regular maintenance it’s going to last a long time

@dekillerjoy5392 Ай бұрын

@@grind-it-out ok thanks

@grind-it-out Ай бұрын

👍🏼

@ElephantGaming_0 Ай бұрын

Will this work on my 2013 Passat?

@grind-it-out Ай бұрын

Yes on any car. Just gotta make sure your pipe size and get the same size muffler. 💯👍🏼

@ElephantGaming_0 Ай бұрын

@@grind-it-out awesome thanks for your feedback, I used your video to find the diffuser and I absolutely love it.

@grind-it-out Ай бұрын

@ElephantGaming_0 That’s great!!! I really appreciate you watching the videos. Car mods can be fun. Glad you liked the diffuser too 💯👍🏼😎

@pedromateo2760 Ай бұрын

Hello I have a question did u get a check engine light or no

@grind-it-out Ай бұрын

No. But you will If You forget to attach the little vacune hose to the intake towards the front of the engine.

@pedromateo2760 Ай бұрын

@@grind-it-out thank u I'm installing the same on in my Audi Q3 2.0t I can't wait I couldn't find any videos on it but it so I guess I'm going to be the first Audi Q3 with the CTS intake

@grind-it-out Ай бұрын

That’s awesome! 💯👀

@tanyatrevethan5026 Ай бұрын

Excellent video with great detail! What would be the 5W-30 version of this same oil? Amazon is saying the ones I’m finding are not compatible with my Passat. I have the same year and model as you.

@grind-it-out Ай бұрын

5 w 30 is good. It recommends both 5 30 and 5 40. Cooler climate is go 5w 30. I’m in Texas so I use 5/40. The oil you get has to be VW approved. Castrol European full synthetic or liqui moly

@peb9840 Ай бұрын

gonna try this on my ‘00 honda civic lx 🙏

@grind-it-out Ай бұрын

😎💯👍🏼

@dickvanrossum4174 Ай бұрын

Sell pls

@grind-it-out Ай бұрын

🤣👍🏼

@Egor-ks2ml Ай бұрын

I figured it out myself as I watched the ads for this video

@grind-it-out Ай бұрын

👀

@Anonymous-ji4sb Ай бұрын

I just did my windshield, I highly recommend cleaning your wipers after doing the windshield with the glass cleaner and a clean paper towel. 😁

@grind-it-out Ай бұрын

I do that. I just use water but yes and thanks for watching 💯👍🏼😎

@Anonymous-ji4sb Ай бұрын

@@grind-it-out That’s best for the longevity of the wiper blades. I have super hard water so I’m better off using glass cleaner 🫤 I ran out of glass cleaner and my wipers are at the end of their life so I used rubbing alcohol. It worked super super well but I’m sure it will dry them out faster.

@grind-it-out Ай бұрын

@Anonymous-ji4sb Yes but at least they are clean. Nice job. Thanks again 💯👍🏼

@joshevans6841 Ай бұрын

Why not just get high flow drop in filter it’s 10x better for the engine makes hp the air intake actually loses hp also drops acceleration compared to high flow drop in filter this comes from multiple tuners

@grind-it-out Ай бұрын

I already had that. I wanted more turbo sound. But yes

@sueddo2634 Ай бұрын

"I don't weight as much as a car, at least not yet" same man, same. Thanks for actually measuring out the width. Found it so annoying that they just say "extra wide width" like that really helps me and there's no information at all on the website or anywhere.

@grind-it-out Ай бұрын

Ha! Well I appreciate you watching the video. I still love the ramps. They are great

Ең жақсы KZbin

Пікірлер