Go Rhino

Пікірлер

@eriknash8783 12 күн бұрын

It's clear to me now that Toyota didn't even put a rear bumper on these trucks. Just some useless wings on the ends pf the hitch. I can't even stand on the top of my bumper without the plastic crumpling. Also, the slightest amount of force against those end caps bends them right into the bed. Also a good reminder why to never purchase Go Rhino products because they are not actually designed and engineered properly. Trash!

@Adrian-jh5cr 26 күн бұрын

Just ordered this and i can't it together screw holes done line up it's impossible to put together for 1300 you expect this to work correctly. Wish I would've tread the reviews before I bought it. It's going back of I can't get it together by this weekend. Should've known there was going to be an issue when it didn't ship together! Took 3 weeks to come in.

@Scott_03 27 күн бұрын

17/32 drill bit! Really? Why not just 1/2 inch? I'm not spending $15 on one drill bit.

@Elitepred5 Ай бұрын

Can anyone help I was pulled over because my bar blocks back up light is there way around this or no of a back up light install for the bar?

@alonzoduran961 Ай бұрын

It sucks

@emsmedic28 Ай бұрын

Do these still come with the center support bracket??? From the site and videos, it looks like that has changed. Please advise. Thank you.

@johnwoodlock3989 Ай бұрын

The video is way more informative than the instruction sheet.

@RicardoHernandez-zn6ki Ай бұрын

Is the oem bumper for sale?

@JacobMoy-ij5om Ай бұрын

Does this bar make noise when you drive down the highway with the light retracted? For like a TRX any info I would be great full

@kevinknesek4615 19 күн бұрын

If anything is going to make noise, it would be the lights not the chase rack. That being said, there are much better options for a TRX. ADD makes a chase rack with an actuator, and chase racks like the Armordillo can be modified to include one. These options will have a much stronger actuator to avoid light shaking and faster movement. I went the custom route for my TRX. Best of luck

@jamestemoney6680 2 ай бұрын

What size are those lights

@MarcoDong58 2 ай бұрын

Nice video but I wish you would have spent more time to show exactly how to disconnect the trailer lights socket.

@iceman20177 2 ай бұрын

Didnt seem like nutsert install worked very well with the one they include , video skipped over it pretty quick 😂

@featherspreaderinc3146 2 ай бұрын

Took five hours, lots of cussing. But, it's on the truck. The strong post build whiskey helped me get over it.

@Dieselpwr 3 ай бұрын

$$$

@srstmss37 3 ай бұрын

Why do you send out instruction that are not the same as this video? Your written instructions that are included say to install the control module on the drivers side. This videos says passenger. The installation of the drivers side front of a 2022 Colorado find you removing all the connectors to the wire loom that is in the way of the motor. I see in these video instructions you omit showing drivers side installation. Is that because the front motor is a PIA? Photos and diagrams of the front motors in the written instructions are different. I wasted some much time doing this install. If I was paying someone to do the install, how much extra would they have charged me because of your crappy documentation.

@Suckonsum 3 ай бұрын

We’re can I find the plastic end caps

@SirAJentz 3 ай бұрын

Like the design, I'm not too sure about drilling straight down into bed rail! There should be an option for the inner rail instead.

@Doc1855 3 ай бұрын

I’m trying to find a set for my Tacoma TRD Off Road Double Cab

@torontoraptors2107 3 ай бұрын

Can you guys build a ladder connecting to the rack?

@Miasaint10 3 ай бұрын

I've invested a significant amount of money and time into my truck. Typically I do it on a good budget, but this time I decided to splurge on this sport bar and replace my $300 one. I should have left the $300 one on. It didn't come with useful hardware, manufactured incorrectly so nothing lines up, stripping out bolts. Wires are about 10 ft too short to get to the engine. No space to run these wires inside of the tubing like it recommends. They say keep everything loose until you set it in place, but it makes it physically impossible to get everything to line up correctly. And it actually resulted in me shattering my rear window (which I will PARTIALLY take responsibility for). I am not someone of a low skill set when it comes to these type of installations. I'd recommend you look somewhere else. The only way I would forgive this product is if they reimbursed me. You can save a massive chunk of money and still get a quality product elsewhere.

@edgbarrios89 4 ай бұрын

These do not fit perfectly on a 2023 gmc at4.. we did it with modifications on my buddies truck. But I would not recommend

@cyclest9300 3 ай бұрын

what type of modifications ??

@plexiform1973 4 ай бұрын

Would be really great to see a detailed installation video really going into how to route the wiring from battery to lights and how to get the switches in the dash. And how to connect multiple lights to the same switch without having to run a bunch of wires the entire length. The holes are too small fit the wire connectors through. This bar has a very sturdy build quality but the designers did not pay close attention to details regarding how to make wiring through holes and bars easy. For the $$$$ being asked for this bar it needed to be better designed and also come with MUCH MUCH better instructions.

@mrs_tink 4 ай бұрын

Just got mine yesterday, can’t wait to get it on my gladiator

@FGCScrub 4 ай бұрын

Hi can you use the basic rotopax mount on the roof rack or do you need a plate to mount it on?

@Terminator_T-X3 5 ай бұрын

Are you able to have a cover for the truck bed with this?

@plexiform1973 5 ай бұрын

You didn’t retract the lights all the way…are they able to go all the way down?

@GaryV16 5 ай бұрын

What lights are those?

@TroyL824 5 ай бұрын

Horrible product. DO NOT PURCHASE!! Mine arrived with no hardware, chipped powder-coat and broken pieces. I’ll never buy a Go-Rhino product again.

@plexiform1973 5 ай бұрын

does this work with the retrax pro xr bed cover? Is it possible to use the T Slot rails to mount the sport bar?

@torontoraptors2107 5 ай бұрын

Pls build also an easy installation rear window ladder designed to connect to the srm roof racks-

@minJa-mo9ke 5 ай бұрын

Can I take it as I please?0.02

@Texas77073 5 ай бұрын

What part number are the Q series light for rollbar?

@kriswibbenhorstermeister9885 5 ай бұрын

Just want to add my experience with this bumper and comment on the ending of this video. The video ends with the guy telling you, the LED lights will need to be hardwired in to replace your license plate lights, but they don’t show you where the license plate lights will then go, because there are no license plate lights on this bumper. None. The OEM bumper has license plate lights on each side of the plate, but the Go Rhino bumper does not. You will need to cut holes in the bumper and fabricate some sort of apparatus for those LED bulbs to go. I taped up my incandescent lights behind the bumper and I’m having to figure out some sort of aftermarket license plate light solution. This is ridiculous. Go Rhino should state this on their site but they don’t. I specifically asked about license plate lights before I made the purchase and the salesperson told me there were license plate lights. I assumed that meant the bumper had lights as a part of it. It doesn’t. Buyer beware.

@jeffmiller4053 5 ай бұрын

That would be cool for a undercover cop truck

@jgarcia238ify 6 ай бұрын

How does the rivet atay in place. I cant grasp whats going on lol

@jgarcia238ify 6 ай бұрын

How does the rivet stay. Thats my only struggle to comprehend

@user-kd6yj2kg8h 6 ай бұрын

Hello,from where i can buy the roll bar with retractable light?i’m from europe

@mattarmstrong1562 6 ай бұрын

I put on a set of these & when the door is closed, the boards aren't as close to the body as I'd like. Is their a way to adjust this? I can push the boards with my leg & it goes farther in....

@x0Diesel0x Ай бұрын

If you add some washers between the motor and the pinch weld on the corner you want to bring closer top the body you will bring it in a bit.

@coreygunter4787 6 ай бұрын

How can I get the installation manual for the chrome one?

@crashhypermonkey 6 ай бұрын

Ankle breakers in under a year,, mine lasted about 8 months. Only put on 7000 miles. Dual motor opens very very slow now

@MrDamien1963 6 ай бұрын

Will it work on the new Toyota Tundra that has the digital rear view camera? It looks good but im worried that this function will be disabled or rendered unusable.

@JoseCruz-kp7ru 7 ай бұрын

Worthless video, why would I buy this product ?

@Teasy010 7 ай бұрын

Is it better to install the retractable tonneau cover before or after the Sport Bar 2.0? What I’m basically asking is… does the sport bar go over the tonneau cover or does the tonneau cover lay on top of the mounting plate of the sport bar?