Resetting your heat pump
1:10
11 ай бұрын
Easytron installation video
9:32
Жыл бұрын
VLR 70 EU installation video
7:06
Heat pump easy
1:03
Жыл бұрын
SNU Plus GB installation video
4:41
Пікірлер
@mireillelassueur2397
@mireillelassueur2397 Ай бұрын
Appallingly designed menu, so not intuitive. ☹
@FXHEROS
@FXHEROS Ай бұрын
is a mains outlet a must?
@ahmedal-ammari1234
@ahmedal-ammari1234 2 ай бұрын
I'm considering using the DEM 3 Set. Since the initial water temperature is 5 degrees Celsius in winter, what would be the resulting output temperature?
@ppuh6tfrz646
@ppuh6tfrz646 4 ай бұрын
I'm going to have a new bathroom fitted. How would the electrics be set up for this? Would I need an electrician to come in after the old bathroom has been stripped out and channel the cable leading to fused spur into the wall before the new bathroom is fitted?
@ppuh6tfrz646
@ppuh6tfrz646 4 ай бұрын
Thank you for posting this. I'm considering having these in my kitchen and bathroom. Will I need an electrician to fit a fused spur under the kitchen sink before this is installed?
@StiebelEltronuk
@StiebelEltronuk 4 ай бұрын
Hi - yes you probably would. Do bear in mind these mini heaters are suitable for basins but you might find even the 6kW a bit underpowered for a kitchen sink. Consider one of our compact instant range instead for that - the 10/12 models are suitable for kitchen sinks and a shower + basin. Do look at the maximum flow rates on our website and decide if you are happy with them.
@manikandankm3974
@manikandankm3974 4 ай бұрын
I have hot water - small storage tank (5Ltr) at my Kitchen under sink. But hot water is not instantaneous. It takes so much time to heating the water and gives it through the tap . I would like to have the water tap with the continuous flow of hot water when i turn on the hot water tap . How i can i fix this issue . Will the mini Durchlauferhitzer fix this solution when i have it under sink of my kitchen ? Please let me know .
@StiebelEltronuk
@StiebelEltronuk 4 ай бұрын
Hi, yes you could use an 10/12kW instant water heater for this application (We would not recommend a mini instant water heater - 10/12s are in our compact range). You need to be aware that flow from instant water heaters is typically a little slower than tanks if you want really hot water, but if speed of response and continuous supply is more important to you then this could be a solution. I would suggest you look at our range here: www.stiebel-eltron.ie/en/products-solutions/Hotwater/instantaneous_waterheater/compact_instantaneouswaterheater.html
@ZavorotchevaSofia
@ZavorotchevaSofia 5 ай бұрын
hello, please tell me how to turn off the heater😩
@StiebelEltronuk
@StiebelEltronuk 5 ай бұрын
Hi the on-off switch is on the right hand side of your heater. You can also put it into standby mode - the user manual pages 4 and 5 cover this - a copy can be downloaded here: www.stiebel-eltron.co.uk/content/dam/ste/cdbassets/current/bedienungs-_u_installationsanleitungen/instructionandinstallationmanual_doc-00077242.pdf
@user-tg9lv6qn7g
@user-tg9lv6qn7g 6 ай бұрын
How to change from 1000 watts to 2000
@StiebelEltronuk
@StiebelEltronuk 6 ай бұрын
Hi full operating instructions can be found here: www.stiebel-eltron.co.uk/toolbox/content/docs/anleitungen/installation/CK_20_Trend_LCD/326615-45999-9874_CK_20_Trend_LCD_de_en_fr_nl_cs_pl_hu_tr_ru.pdf If you are still having issues don't hesitate to call our technical helpline on 0151 346 2301
@roshanlal-mn3qr
@roshanlal-mn3qr 6 ай бұрын
Aaj mene lagaya
@user-jb2eb1dp6r
@user-jb2eb1dp6r 6 ай бұрын
How do you reset the timer?! Surreal! No help anywhere in instructions
@user-jb2eb1dp6r
@user-jb2eb1dp6r 6 ай бұрын
how the heck do you reset the ridiculous timer? Nothing is working now at all... Please help!
@StiebelEltronuk
@StiebelEltronuk 6 ай бұрын
hi if you are really having probelms you can call our technical team on 0151 346 2301 and they will assist you. Alternatively there is a PDF quick guide to setting your heater here: www.stiebel-eltron.co.uk/content/dam/ste/gb/en/service/downloads/brochures/Programming%20the%20CNS%20heater.pdf
@DLSAKAS
@DLSAKAS 7 ай бұрын
How do I want to choose all day instead of timer? Plus it only turn on for 4 mins then it was off automatically.
@StiebelEltronuk
@StiebelEltronuk 7 ай бұрын
Hi, yes you can simply select comfort mode rather than timer mode which will hold the room at your set comfort temperature while the heater is on. Please refer to the manual for detailed instructions (but it is the sun symbol on the top row of the display)
@DLSAKAS
@DLSAKAS 7 ай бұрын
How I want to use all day instead of timer?? Please advice.
@StiebelEltronuk
@StiebelEltronuk 7 ай бұрын
Hi, yes you can simply select comfort mode rather than timer mode which will hold the room at your set comfort temperature while the heater is on. Please refer to the manual for detailed instructions (but it is the sun symbol on the top row of the display)
@DLSAKAS
@DLSAKAS 7 ай бұрын
Can’t I turn it on when I want instead of set up timer??
@StiebelEltronuk
@StiebelEltronuk 7 ай бұрын
Hi, yes you can simply select comfort mode rather than timer mode which will hold the room at your set comfort temperature while the heater is on. Please refer to the manual for detailed instructions (but it is the sun symbol on the top row of the display)
@walterpadilla3969
@walterpadilla3969 8 ай бұрын
Quien les entiende un video sin hablar. Cuesta lograr entender aún que sea un poco así solo viendo
@walterpadilla3969
@walterpadilla3969 8 ай бұрын
Así sin hablar es difícil de entender. Fuera bueno un video de como se programa y como se hace la instalación eléctrica
@walterpadilla3969
@walterpadilla3969 8 ай бұрын
Me gustaría explique la instalación eléctrica y para q cambia esas piezas rojas
@simonherman7346
@simonherman7346 8 ай бұрын
You lost me on the Stiebel Eltron Heat Curve. Can you explain slowly and exactly. Top 3 figures of screen do what? Top left figure of 20 = 20ºc for underfloor heating? Top Middle figure ? Top Right Figure? If I set my Top left figure to 20ºc then how will the system reach 24ºc If I turn up my FE 7 thermostat?
@simonherman7346
@simonherman7346 8 ай бұрын
What is Heating Circuit 1 or Heating Circuit 2 ? HC1 vs HC2 HC1 Return Temp is from what? (Ground heat recovery?) HC2 Flow Temp is from what? (Actual captured heat within the system?)
@simonherman7346
@simonherman7346 8 ай бұрын
What 24h times determine Day or Night with your settings? Example: Day Hours: 0:00 - 18:59 (12hr clock = 12:00am (Midnight) - 6:59pm Night Hours: 19:00 - 23:59 (12hr clock = 7:00pm - 11:59pm)
@simonherman7346
@simonherman7346 8 ай бұрын
Black dots around the clock are off. Opposite to my mentality. Once your day is wheeled into view you need to press 'PRG Black square button' to select your start time. This 24hr clock is so confusing 0:00 is midnight at the end of a given day. On for 2h = Start at 0:00 (NOT the 4 dashes - - - -) and End 2:00. Don't forget to press 'PRG Black square button' to select the next stage in this process. Notice he presses the 'PRG Black square button' often but not mentioned. He presses to skip through or select the 'I', 'II', 'III' stages of the 3 optional times of the day to set on & off times, e.g. Morning, Evening & Night etc. NOTE: Flap closed initiates different settings to flap closed. For this you need flap, obviously so you can access the PRG button, menues etc. Flap closed means the wheel will select different modes. Don't get caught out as you can change modes without thinking.
@66itsonlyme
@66itsonlyme 9 ай бұрын
Be aware this is actually much less than 95 degree when dispensing , I can only ger 85 which isnt hot enough
@StiebelEltronuk
@StiebelEltronuk 8 ай бұрын
Hi please do contact our technical helpline. It is possible that you have not installed a key part on the unit that regulates the heating temperature.
@chrismoule7328
@chrismoule7328 10 ай бұрын
Whilst the heater itself is great the design of the controls and the programming steps are beyond incompetent. They must have been "designed" by someone who never had any intention to use them. Helen Keller could have done a better job. Even this video is too basic.
@stiebelulrich
@stiebelulrich Жыл бұрын
Thanks Mark! I mailed the video to my brother !
@ralfmalik6984
@ralfmalik6984 Жыл бұрын
A great product.
@barbarabrunn1754
@barbarabrunn1754 Жыл бұрын
I installed it - really so easy to install ! Great product.
@David_mueller_kroeger
@David_mueller_kroeger Жыл бұрын
Love it!
@flyingfishwebdesign
@flyingfishwebdesign Жыл бұрын
Is this really powerful enough for a shower as your website suggests? Average water temp going in will likely be around 10 degrees, on a 12kW model that works out as about 6.1l flow a minute (using your flow calculator tool)...is this enough for a non-electric shower?
@StiebelEltronuk
@StiebelEltronuk Жыл бұрын
Hi - it does of course depend on how powerful you want your shower. At 240V this can actually deliver more like 14kW so can have a max flow of 7.3l/m with an intake of 10 degrees and an output of 38. I actually have a model this size running a shower and basin at home.
@stephenroberts7459
@stephenroberts7459 Жыл бұрын
Well that was as clear as mud!
@marcozorzi6770
@marcozorzi6770 Жыл бұрын
Great! 🔝 looking forward to see the new MVHR units and the heat pumps 👏
@stephenroberts7459
@stephenroberts7459 Жыл бұрын
It is a shame that the heater does not work as advertised! I followed their instructions very closely and programmed it to switch on at 06:00 and off at 09:00. It switched off at the correct time but came on in the middle of the night! Asking them for aid was useless as they kept sending off to someone else.
@grigor_karagozian6931
@grigor_karagozian6931 Жыл бұрын
could you do a video about Stiebel eltron water DCE-S 6/8 plus heater plumbing installation instructions
@StiebelEltronuk
@StiebelEltronuk Жыл бұрын
The Plus is very similar in its installation requirements to the X-Premium so this video should help - I'll take that feedback to the team. Thank you.
@baznevingreen4909
@baznevingreen4909 Жыл бұрын
How do you get the padlock symbol off?
@veronikaavojta4221
@veronikaavojta4221 Жыл бұрын
Dobrý den,můžete mi poradit jak je můžu restartovat abi mi to šlo já to dělám vše podle vás ale furt se mi to ne zapíná samo vždycky si musím zapnout sama a hlídat čas nevím jeslí sem tam něco zmáčkla ale kdys otevřu okno tak mi smusti sami ale jinak kdys okno je zavření a je nastaveno však jak má být i podle vás tak tak stejně se to ne zpousti předem děkuji jeslí by stě mi mohli poradit a pomoct třeba jak to zresetovat
@veronikaavojta4221
@veronikaavojta4221 Жыл бұрын
Dobrý den,můžete mi poradit jak je můžu restartovat abi mi to šlo já to dělám vše podle vás ale furt se mi to ne zapíná samo vždycky si musím zapnout sama a hlídat čas nevím jeslí sem tam něco zmáčkla ale kdys otevřu okno tak mi smusti sami ale jinak kdys okno je zavření a je nastaveno však jak má být i podle vás tak tak stejně se to ne zpousti předem děkuji jeslí by stě mi mohli poradit a pomoct třeba jak to zresetovat
@veronikaavojta4221
@veronikaavojta4221 Жыл бұрын
Dobrý den,můžete mi poradit jak je můžu restartovat abi mi to šlo já to dělám vše podle vás ale furt se mi to ne zapíná samo vždycky si musím zapnout sama a hlídat čas nevím jeslí sem tam něco zmáčkla ale kdys otevřu okno tak mi smusti sami ale jinak kdys okno je zavření a je nastaveno však jak má být i podle vás tak tak stejně se to ne zpousti předem děkuji jeslí by stě mi mohli poradit a pomoct třeba jak to zresetovat
@veronikaavojta4221
@veronikaavojta4221 Жыл бұрын
Dobrý den,můžete mi poradit jak je můžu restartovat abi mi to šlo já to dělám vše podle vás ale furt se mi to ne zapíná samo vždycky si musím zapnout sama a hlídat čas nevím jeslí sem tam něco zmáčkla ale kdys otevřu okno tak mi smusti sami ale jinak kdys okno je zavření a je nastaveno však jak má být i podle vás tak tak stejně se to ne zpousti předem děkuji jeslí by stě mi mohli poradit a pomoct třeba jak to zresetovat
@SilkTwirl
@SilkTwirl Жыл бұрын
design flaw: hot air should have been forced to come out from the bottom of the heater. now my feet is cold and my head is worm. not happy.
@muhammettufenkci8148
@muhammettufenkci8148 Жыл бұрын
hey bro it gives err error how to fix
@StiebelEltronuk
@StiebelEltronuk Жыл бұрын
Please contact [email protected] with details of your product and some pictures of the error and they will be happy to help
@olive1162
@olive1162 Жыл бұрын
My Radiator keeps saying err why ?
@StiebelEltronuk
@StiebelEltronuk Жыл бұрын
please contact [email protected] with some images and details of your product and they will be happy to assist
@1ofmilliesboys707
@1ofmilliesboys707 Жыл бұрын
Is it possible switch pro1 and pro2 off and just use pro3 so it comes on for 2 hours on the morning and 2 hours late afternoon?
@stephenroberts7459
@stephenroberts7459 Жыл бұрын
That is what I wanted to do but it kept on coming on in the middle of the night! The manufacturer were worse than useless and gave me no help at all. I threw it away.
@1ofmilliesboys707
@1ofmilliesboys707 Жыл бұрын
Why are there no written instructions to tell you how to set the time in the instruction book????
@DLSAKAS
@DLSAKAS 7 ай бұрын
Are you still using it? I need an advice please.
@1ofmilliesboys707
@1ofmilliesboys707 7 ай бұрын
@@DLSAKAS yes I’ve got basic instructions from makers if you ask them they will send pdf form to you
@DLSAKAS
@DLSAKAS 7 ай бұрын
@@1ofmilliesboys707 I want to ask you some questions. Why it always off after exactly 4 mins? How can I do setting like all day instead of timer? Please help.
@1ofmilliesboys707
@1ofmilliesboys707 Жыл бұрын
Can you set the heater to come on and off at 2 different times. ie 6.45 to 7.45 in the morning and then 4.30-5.30 in the early evening?
@danielp2911
@danielp2911 Жыл бұрын
Did you figure this out?
@1ofmilliesboys707
@1ofmilliesboys707 Жыл бұрын
@@danielp2911 it’s to do with the fall back temperature. You need to set it to a minimum temperature say 15 degrees. It then comes on at programmed times if the temperature falls to 15 degrees to high a fall back temperature and it will come constantly. Plus a maximum temperature say 20 degrees hopefully that helps you.
@astghikmadatyan9188
@astghikmadatyan9188 Жыл бұрын
Hello. Can this bathroom radiator heat the bathroom during very cold winter?
@adidude2
@adidude2 Жыл бұрын
Can I not go under 18.5?
@Gulfraz.
@Gulfraz. Жыл бұрын
Yes, if you get the Wim Hoff version
@tinaparry9487
@tinaparry9487 Жыл бұрын
How do you cancel the timer all together
@williammurray4884
@williammurray4884 Жыл бұрын
How do you set the temperature
@StiebelEltronuk
@StiebelEltronuk Жыл бұрын
Hi William, Remove the front cover. Using a screwdriver, set the potentiometer to the maximum required temperature. You can see instructions for this in the manual on page 44 onwards :www.stiebel-eltron.co.uk/toolbox/content/docs/anleitungen/installation/DEM/293811-43998-9728_DEM%203-7_de_en_fr_nl.pdf
@surajkadam3879
@surajkadam3879 2 жыл бұрын
Looking vise as well as performance wise one of best singer phase water heater
@matthewthomas5792
@matthewthomas5792 2 жыл бұрын
Do you have videos of the Trend wiring ?
@StiebelEltronuk
@StiebelEltronuk 2 жыл бұрын
No, sorry but this may be of use: www.stiebel-eltron.co.uk/content/dam/ste/gb/en/service/downloads/wpl_air_source_single_phase_wiring_diagrams.pdf. I suggest you email [email protected] if you have a specific question. Regards
@Zveki
@Zveki 2 жыл бұрын
I want to replace my WPM on my heat pump. Is WPM II going to work as WPM? The manual says that WPM II is going to work with any Stiebel Eltron heat pump.
@StiebelEltronuk
@StiebelEltronuk 2 жыл бұрын
Hi, this channel is not staffed by technical staff. Can I ask that you direct you enquiry to [email protected] or 0151 346 2301. Best wishes.