Thank you 🤗 Glad you liked it. Thank you for watching & commenting. 👍
@Fortes_RC_Adv11 күн бұрын
Super beautiful unimog😉💪
@RC3DPrintAdventure11 күн бұрын
Thank you. It's a great scale RC. Thank you for watching & commenting..👍👍
@OGRadGrow13 күн бұрын
Nice smooth scale driving and awesome location 👍🏾
@RC3DPrintAdventure12 күн бұрын
Glad you enjoyed, yes it is a great small crawler location. Thanks for watching & commenting. 👍
@OGRadGrow13 күн бұрын
Awesome footage and rig looking astounding 👍🏾💯
@RC3DPrintAdventure12 күн бұрын
Thanks 👍. It's a great fun rig. Very good articulation. Thanks for watching & commenting. 👍
@Del350K417 күн бұрын
What a nail-biting beginning this video has! Yes, your arches are completely undetectable. Even knowing that they're printed, I can't see the slightest hint of any lines; they look as though they're resin printed. You seem to have a magically low C of G, yet enjoy excellent ground clearance, too!
@RC3DPrintAdventure17 күн бұрын
It was very much a cliff hanger for much of the crawl. There was a point towards the end (where the camera gets very close to catch it) where the Unimog really was about to go. Some stiffer foams would give the tyres more sidewall rigidity, but where's the fun in that! Thank you for commenting on the 3D arches. I'm trying to improve the quality of my finished prints by sanding out the lines more consistently. The metal wheels combined with the portal axles seem to give the ultimate scale crawler here (plus decent ESC). It just wants to climb everything. I could have stayed there all day trying out it's capabilities. That was just one short single shot. 😁
@Del350K417 күн бұрын
@@RC3DPrintAdventure It's hugely impressive.
@TheFarmShow16818 күн бұрын
❤❤
@carloshnunez18 күн бұрын
Great video my friend the unimog looks awesome on those rocks 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@RC3DPrintAdventure17 күн бұрын
Thank you Carlos, it is a great little crawler. Thank you for watching & commenting. 👍
@cgdoublezerorc21 күн бұрын
Beautiful rig. Amazing slow control. 00
@RC3DPrintAdventure21 күн бұрын
thank you, glad you liked it. 👍
@renercadventures22 күн бұрын
Great truck😊
@RC3DPrintAdventure22 күн бұрын
Thank you very much. Glad you liked the video..👍
@carloshnunez23 күн бұрын
Looks great with those tires 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@RC3DPrintAdventure23 күн бұрын
they are great soft & sticky tyres. I have been waiting to use them on this truck for a while! Thank you for watching & commenting. 👍
@Del350K423 күн бұрын
Well crawled, sir! And what a lovely Mog you've made. The metal (steel?) wheels put the weight right where it's needed, and the wider arches don't make the truck look like a cartoon - in fact, I wouldn't have noticed at all if you hadn't mentioned them. Did you sit there and laboriously model that wood grain yourself? If so...congratulations! It looks tremendous.
@RC3DPrintAdventure23 күн бұрын
Hello Del. The wheels are aluminium. But I put some brass rings in for good measure. It weighs a scale ton lower down now. Luckily it seems Unimogs can have subtly different arches in full scale. So wider looks fine within reason. I would like to take the credit for the wood. But it's molded like that. Just don't see it in flat body colour. There seemed to be just a little too much green as standard. It's a really effective small crawler. Hoping for a proper excursion tomorrow. 👍
@Del350K422 күн бұрын
@@RC3DPrintAdventure I thought you might've printed a replacement bed - odd how the stock flat green conceals the texture so well on screen. It's got proper low gearing!
@RC3DPrintAdventure21 күн бұрын
It's a great little crawler with the extra wheel weight. I took it for a proper spin today. Just set the throttle speed & it crawls up anything. Only need to concentrate on the lines! I've been thinking of another modification for the bed. The camper box has been done a lot already for this model. I thought about a tow truck crane?
@Del350K420 күн бұрын
@@RC3DPrintAdventure I love it when you have a good enough ESC to allow you to just creep along, thinking only about lines. The tow truck look is really cool for a trail truck or crawler,vans I think a Unimog tow truck would look marvellous. One reason I've never done it is the thought of either breaking the job, if I were to make it from something like styrene, or breaking i's mountings to the chassis. But this is so small that, a bit like a Matchbox car, perhaps it can tumble down a slope without collapsing.
@MysticRiverRC23 күн бұрын
Nice squooshy tires! Love the wood sides! Nice!
@RC3DPrintAdventure23 күн бұрын
Thank you. The tyres are very soft & sticky. I thought there was just a little too much green so made the most of the wood grain. Thanks for watching & commenting. 👍
@robsonmenezes100624 күн бұрын
Muito bom o vídeo amigo está bem realista, só está faltando um detalhe, o personagem porque, o carro está parecendo um fantasma andando é uma opinião amigo 👍👍👍😍🤩
@Fortes_RC_Adv26 күн бұрын
Nice video Congrats 😊
@RC3DPrintAdventure26 күн бұрын
Glad you liked the video. Thank you for watching & commenting.
@rcbloke77828 күн бұрын
Would you say this car is more 1/16 scale than the stated 1/18?
@RC3DPrintAdventure27 күн бұрын
Yes, looking at some other 1/18 vehicles, this is definitely a bigger a scale. Thanks for watching & commenting..👍
@carloshnunez28 күн бұрын
Very nice 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@RC3DPrintAdventure28 күн бұрын
Glad you liked it. Thank you for watching & commenting. 😁
@theRCcarshow28 күн бұрын
nice video capture on your crawler
@RC3DPrintAdventure28 күн бұрын
Glad you liked it. Thank you for watching & commenting. 👍
@perohijoАй бұрын
Did you add the hubcaps or did they come with the wheels?
@RC3DPrintAdventure21 күн бұрын
They are hubcaps.
@perohijoАй бұрын
Can you please add a link for the beadlocks and the action figure? I have been looking on Amazon but can't find thos specific ones.
@RC3DPrintAdventure21 күн бұрын
I believe the figure is discontinued now. The wheels were purchased over a year ago now.
@jeepawak5866Ай бұрын
Jimny fms to off-road must be slow I think rim and tire to small Must changer to big
@annopapaiso3626Ай бұрын
Top speed Max. Km/h ?
@larryjoseph9063Ай бұрын
Can shf or marvel legends fit inside?
@Fortes_RC_AdvАй бұрын
Very nice video😁💪✅️ FMS has great RCs😉
@RC3DPrintAdventureАй бұрын
Glad you liked it. Yes, FMS make excellent scale RCs. So much easier to make nice videos. Thank you for watching & commenting..! 👍
@MRBRUSHLESSАй бұрын
Awesome video of my friend very nice truck and impressive crawling great job thumbs up👍
@RC3DPrintAdventureАй бұрын
Glad you liked the video. It is a very nice scale truck. Thank you for watching & commenting.
@carloshnunezАй бұрын
Very nice 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@RC3DPrintAdventureАй бұрын
Glad you liked the video. Thank you for watching & commenting. 👍
@xu8217Ай бұрын
hi super looking rig, now then im thinking traxxas upgrades such as brass portals ect would they fit cheers ron
@manta1121Ай бұрын
Awesome video❗✨👍
@RC3DPrintAdventureАй бұрын
Glad you liked it. Thank you for watching & commenting..! 👍
@PatrikLjaljovskyАй бұрын
👍👍👍
@RC3DPrintAdventureАй бұрын
Glad you liked the video. Thank you for watching & commenting. 👍
@user-tc2tn7zj1fАй бұрын
Tolles Teil👌👌👌
@RC3DPrintAdventureАй бұрын
Freut mich, dass es dir gefallen hat. Vielen Dank fürs Zuschauen und Kommentieren.
@user-tc2tn7zj1fАй бұрын
Woher hast du die Soldaten- Figur?
@RC3DPrintAdventureАй бұрын
Ich habe die Figur von Amazon bekommen. Joytoy 1/18 Figur. Auch auf Aliexpress. 👍
@thatsonicTFguyАй бұрын
Love the vid. It gives me a relaxing vibe. I think I'll sleep better tonight 😂😂😂
@RC3DPrintAdventureАй бұрын
Really glad you liked the video. Thank you for watching and commenting..👍
@thatsonicTFguy2 ай бұрын
How do you attach the black widow figure and keep it steady?
@RC3DPrintAdventureАй бұрын
Hello, I drilled a hole either side of the drivers seat & ran a cable tie around the figure & under the interior panel. The cable tie acts as a lap belt then. 👍
@thatsonicTFguy2 ай бұрын
Cool vid, dude. What figure did you use?
@RC3DPrintAdventureАй бұрын
The figure is a walking dead action figure, Rick. Approximately 5" tall. It's a but tight for head room, but he doesn't move. Thanks for watching & commenting. 👍
@Del350K42 ай бұрын
This is a marvellous piece of creative modelling, Guy! I thought you'd nicked the box from a Bruder fire engine or something! Crawls well, too, considering what the box must have done to the C of G...
@RC3DPrintAdventureАй бұрын
Hello Del, I'll definitely take that as a compliment that you thought the box was bought. It was a simple design but I am happy with the finish. Agreed, the box has shifted the CofG upwards, but it's completely hollow & thin walled. So as good as it gets.👍
@Del350K4Ай бұрын
@@RC3DPrintAdventure If we weren't prepared to accept a slightly higher C of G than stock, we'd be driving lexan jelly moulds around our gardens!
@RC3DPrintAdventureАй бұрын
@@Del350K4 Indeed. I think the higher CofG makes it lurch & wobble in a realistic fashion. As good as modern lexan designs are getting. You can't beat a hard body. 😁
@kosalamadhubhashitha22082 ай бұрын
Hello would you mind telling me about the wheels? What size is that
@theminiatureconstructionco45562 ай бұрын
Nice conversion. 👍
@RC3DPrintAdventureАй бұрын
Thanks 👍 I'm happy how it came out. Thanks for watching & commenting. 👍
@carloshnunez2 ай бұрын
Very nice job looks great 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@RC3DPrintAdventure2 ай бұрын
Thanks 👍. Glad you like it. You're ambulance version got me thinking about these again.
@rcworldKenya2 ай бұрын
wow ! looks great
@RC3DPrintAdventure2 ай бұрын
Glad you like it. Thank you for watching and commenting. 👍
@MysticRiverRC2 ай бұрын
It looks so much better with those arches filled! Do you have a link to those tires?
Thanks yes, looks more truck like without looking too offroad. 👍
@carloshnunez2 ай бұрын
Very nice looks much better now 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@RC3DPrintAdventure2 ай бұрын
Yes, I agree. More of a truck. Thank you for watching & commenting..👍
@anttia-r9637Ай бұрын
Hi. Why should all rc cars look like bulk crawlers, I prefer the original.
@carloshnunezАй бұрын
@@anttia-r9637 Look for the real vehicle and you will see
@Del350K42 ай бұрын
Wow, Guy - it looks ten times better! Presumably it'll improve performance too, (unless they rub when you turn).
@RC3DPrintAdventure2 ай бұрын
Hello Del. Agreed, it does look a lot better. I originally thought I would have to lower the suspension too, but the new tyres fill the arches much better. Luckily they don't rub either. The grip is definitely better. The original tyres weren't up to much in the grip dept.! 👍
@GhostRider-vs9ec2 ай бұрын
what type of chassis mount do you have because i know what type of chassis it is but I just can not mount in to the same rc truck as you have done.
@carloshnunez2 ай бұрын
Very nice vehicle congratulations, I this model on my wish list 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@RC3DPrintAdventure2 ай бұрын
I think this model would fit in well with your collection Carlos. Thank you for watching & commenting. 👍
@revinsdam16842 ай бұрын
What do you Use spare tire?
@JKD_LITTLEDRAGON2 ай бұрын
Just got this today. Came home and it was here. Unpacked and charging up ready for a bash tomorrow. Cant wait to have a go. The thing is a gorgeous looking beast 😊🙏🙌
@RC3DPrintAdventure2 ай бұрын
Well done, good choice. It's a great fun truck. Took me a while to find the right surface for it. But excellent fun when I did. 👍