Pulsar XT Installation for Hemi
22:01
Weekend on the Edge 2024
0:31
5 ай бұрын
Evolution CTS3 for L5P Duramax!
5:18
Pulsar XT for Bronco
0:26
10 ай бұрын
Insight CTS3 Tuning Upgrade Sale!
12:38
Comp Box Installation VP44 Cummins
30:35
All-new Comp Box for VP44 Cummins
5:14
Пікірлер
@CarterCreek-DroneDeerRecovery
@CarterCreek-DroneDeerRecovery 3 күн бұрын
What kind of fuel mileage are you getting in the eco and drive tune? And how must HP and Torq increase?
@kevinz763
@kevinz763 3 күн бұрын
On the green wire that you hook to the battery....why doesn't engineering use a red wire because green means ground NOT POSITIVE in wiring??? something to ask your ENGINEERING department ....the average person that takes that cover off and sees a green wire on there is going to call that ground and hook something else to ground
@edgeproductsman
@edgeproductsman 3 сағат бұрын
good catch! The product used in this video was our pre-production unit that we develop internally for R&D and validation. So harnesses are normally assembled by hand. The production units we build/ship after release to the market use manufactured harnesses that use a red wire for power
@RyanDavisson-e9y
@RyanDavisson-e9y 5 күн бұрын
How long does it take for the tunes to get back after you buy them to be able to install them onto the ct3
@Spudhockey
@Spudhockey 10 күн бұрын
I really appreciate the install step by step on the 17 which is different than the rest. But I do have to also say the camera work what the heck We didn't get to see one connection or you fishing it into the spot before putting the top bolts on. We got to see your wrists they're nice but we didn't get to see any of the connections happening. And I realize that it's pretty self-explanatory but there may have been some slight maneuvering that would have been real nice to see. Anyway just my two cents on the camera work. But again thank you for pretty much the step-by-step install.
@jna466
@jna466 16 күн бұрын
Will it fix codes if some things fall off
@edgeproductsman
@edgeproductsman 15 күн бұрын
If you're referring to EGR and DPF, No. Our devices will not support the removal of federally mandated emissions equipment.
@jasonwillis478
@jasonwillis478 18 күн бұрын
all we can hear, is "there goes my transmission"
@justindalton4710
@justindalton4710 21 күн бұрын
When do you think the Evolution CTS3 will be available for the GMC 2024?
@edgeproductsman
@edgeproductsman 15 күн бұрын
We have no eta on flash tuning support for the 2024 L5P application yet.
@Moparram1933
@Moparram1933 Ай бұрын
Also does this remove the speed limiter
@edgeproductsman
@edgeproductsman Ай бұрын
speed limiter is not a feature within this device, that must be done though an ECM reflash.
@Moparram1933
@Moparram1933 Ай бұрын
Do you need a different pcm like a unlocked one?
@edgeproductsman
@edgeproductsman Ай бұрын
no pcm swap/unlock required with this device
@noahjohnson775
@noahjohnson775 Ай бұрын
I have a 5.9 Cummins and I used this tuner to put it on the performance mode, but when I went to take the tuner back out of my truck to put it on the tow tune I noticed that the screen had got busted out of it. What do you recommend I do?
@edgeproductsman
@edgeproductsman Ай бұрын
please get with our tech support and they can walk through some options 888-360-3343
@dragoperini1628
@dragoperini1628 Ай бұрын
Does this do any recalibration to the 10 speed tranny also ?
@jessejohn7478
@jessejohn7478 Ай бұрын
So does it tune the truck or only throttle sensitivity
@IM808HI
@IM808HI Ай бұрын
When truck is put into reverse is the throttle still sensitive or does to change into stock sensitivity?
@hadenough9495
@hadenough9495 Ай бұрын
22 rebel?
@raymondremillard7627
@raymondremillard7627 Ай бұрын
Does it work on a 6 speed transmission ?
@alexengland104
@alexengland104 Ай бұрын
Alright everyone easiest way to update this thing is go into settings add email account then allow it to connect to wifi. Find the update button in settings and you should be good to go.
@JustMakinHorsepower
@JustMakinHorsepower Ай бұрын
Need this for 2024 LZ0 trucks!
@edgeproductsman
@edgeproductsman Ай бұрын
We have LZ0 on the list of applications to cover!
@alextoppan4520
@alextoppan4520 Ай бұрын
So the 24’s have two MAP sensors? On the earlier models the MAP sensor is the one above the one you plugged into. Basically on the top of the manifold.
@edgeproductsman
@edgeproductsman Ай бұрын
That is correct, quite a few changes under the hood on the 2024
@AngelHernandez-lv7xy
@AngelHernandez-lv7xy 2 ай бұрын
Do you have any videos on how to use and install on the 2018 Jeep Wrangler JK
@edgeproductsman
@edgeproductsman Ай бұрын
kzbin.info/www/bejne/h5usenl3l7GImac
@theonejm15
@theonejm15 2 ай бұрын
Will thia effect warranty?
@LegendaryFarm84
@LegendaryFarm84 2 ай бұрын
If you are asking about warranty, This game is not for you. In the US, there is legal precedent that warranty cannot be void without direct proof it was the cause. It is up to YOU to call out these crooked dealerships that make every excuse to not cover warranty.
@edgeproductsman
@edgeproductsman 2 ай бұрын
The device can be removed at anytime without a footprint left in the ECM
@GTOGregory
@GTOGregory 2 ай бұрын
I used an Edge tuning device on my 2015 LML since new and the Chevrolet Dealership in Texas never complained. I set the truck on the stock setting before having any work performed. Emission warranty work was performed on the truck with the turning device connected. I will get this new Edge system for my new L5P.
@travisarmstrong6919
@travisarmstrong6919 2 ай бұрын
Can you adjust it on the fly while driving or do you need the engine off?
@edgeproductsman
@edgeproductsman 2 ай бұрын
it is adjustable on the fly while driving
@jamesbuda7365
@jamesbuda7365 2 ай бұрын
In terms of ease of installation, better to go with Comp box and Cts3 monitor?? or just go with Juice/Cts3 combo?? Are there benefits either way?
@edgeproductsman
@edgeproductsman 2 ай бұрын
installation is pretty similar between the two. The Juice system will include an egt probe and fuel pressure sensor. Those would be items you need to add-on if you buy a Comp and Insight CTS3. The Comp will fuel a little harder, but the Juice will offer safety back downs if you do alot of towing
@user-py2tf8ey7v
@user-py2tf8ey7v 2 ай бұрын
Can you delete with this tuner
@edgeproductsman
@edgeproductsman 2 ай бұрын
No, we do not support the removal of federally mandated emissions equipment.
@user-py2tf8ey7v
@user-py2tf8ey7v 2 ай бұрын
@@edgeproductsman me neither
@Paidbyou
@Paidbyou 3 ай бұрын
Mind blowing 🤯
@user-jr6ys9mz3o
@user-jr6ys9mz3o 3 ай бұрын
Can not get remote to piar just keeps scrolling but can use app to change tune levels and edit how can i fix
@edgeproductsman
@edgeproductsman 3 ай бұрын
please reach out to my tech support 888-360-3343
@soapyfn5955
@soapyfn5955 2 ай бұрын
U ever get it paired?
@zachdavis1776
@zachdavis1776 3 ай бұрын
With an lml cts3 for 11-16 trucks is there an option to turn off the dpf and egr ?
@edgeproductsman
@edgeproductsman 3 ай бұрын
No, our devices will not support the removal of federally mandated emissions equipment
@MarcosSilva-gq7pj
@MarcosSilva-gq7pj 3 ай бұрын
with this application i can unlock a module used to reprogram it original?
@edgeproductsman
@edgeproductsman 3 ай бұрын
Not sure we understand your question?
@KARLGreeneyezMADPLUME
@KARLGreeneyezMADPLUME 3 ай бұрын
ANYTHING FOR REFRESHED TRUCKS IF NOT WHEN?
@zachorzeck3044
@zachorzeck3044 3 ай бұрын
Can you change tunes on the fly or do you have to upload a tune every time and sit there for 10 mins
@edgeproductsman
@edgeproductsman 3 ай бұрын
This is a flash programmer, so it is not shift-on-the-fly tuning. But changing tunes only takes about 2-3 minutes in these trucks. If you're after shift on the fly, look at our Pulsar V3
@Sixkiller_
@Sixkiller_ 3 ай бұрын
Great install video, thank you. I just ordered one for my Birthday for my 2017HD.
@sheriffmedic1
@sheriffmedic1 3 ай бұрын
Will the app show the % of the dpf so I can monitor when a regen is needed?
@edgeproductsman
@edgeproductsman 3 ай бұрын
That app is not used for monitoring, no. You'd want to get the EZX + Insight CTS3 kit for that additional monitoring data.
@lorainejenson1724
@lorainejenson1724 4 ай бұрын
global b has been unlocked will you be making an ezx for the suvs etc ?
@edgeproductsman
@edgeproductsman 3 ай бұрын
We have SUV and LZ0 platforms on our development list, yes.
@StradaRider
@StradaRider 4 ай бұрын
Do you have one coming for a 2004-2005 ram? It would be nice to get away from the suction cup.
@edgeproductsman
@edgeproductsman 3 ай бұрын
We have it on our list to support, yes. But don't currently have an ETA
@StradaRider
@StradaRider 3 ай бұрын
@@edgeproductsman Good to know! Would you happen to know if the 06+ will work in some way, shape or form to an 05? Thanks
@edgeproductsman
@edgeproductsman 3 ай бұрын
@@StradaRider The arm itself would work, but you need a 1" spacer between the arm and the pillar, which means it needs a 1" longer bolt as well
@lucasparkes4432
@lucasparkes4432 4 ай бұрын
Will this also work with the Diablo Trinity T2 ??
@edgeproductsman
@edgeproductsman 3 ай бұрын
Yes!
@phillipvoy2726
@phillipvoy2726 4 ай бұрын
Hey on my edge cts3 it keeps saying I need a “internet update please see our software agent” but I’ve already updated it on the update agent?
@edgeproductsman
@edgeproductsman 3 ай бұрын
Please get with our tech support and they'll make sure to get you squared away.
@lucnitro
@lucnitro 4 ай бұрын
Hi im from Brazil , this works on Gm Silverado (Same than Sierra) 5.3 2023/24 ?
@edgeproductsman
@edgeproductsman 4 ай бұрын
we do not currently support non-US models
@darrenschlafer8016
@darrenschlafer8016 4 ай бұрын
Mine shuts off all the time.
@edgeproductsman
@edgeproductsman 4 ай бұрын
Please make sure the device is up to date, if you have continued issues, contact our tech support team.
@rmonteon80
@rmonteon80 4 ай бұрын
When would it be out for sale in California?
@edgeproductsman
@edgeproductsman 4 ай бұрын
We passed our self certification process before we released, so we know it will pass at CARB. Unfortunately, they have a major bottle neck there and there is no ETA on when they'll review and sign the documents. We have submissions with them over 18-months old.
@joshhickman7515
@joshhickman7515 4 ай бұрын
Only problem I have is I can’t edit the tunes?
@edgeproductsman
@edgeproductsman 4 ай бұрын
The app will allow you to make changes to boost fueling setpoint, APP fueling set point, and timing.
@swiftcuda
@swiftcuda 4 ай бұрын
Do I need to unmarry my Tazer and use Pulsar's gear/tire settings? Or will my Tazer settings remain unchanged? I see this was asked before but not answered. I am deciding between this and the AFE Scorcher
@shrekk5047
@shrekk5047 4 ай бұрын
I have a question in hoping you can answer, i have the 23 trailboss custom, that gives the LZ0 motor but with the old interior, do you know if that makes it global "A" architecture or global "B", and could this work for my truck?
@edgeproductsman
@edgeproductsman 4 ай бұрын
our device will not support that application. I can't speak to whether it uses the Global A or B system. But this device calibrations are specific to the LM2 engine
@cqperformance
@cqperformance 4 ай бұрын
Can tune a silverado 2023 refreshed?
@edgeproductsman
@edgeproductsman 4 ай бұрын
we do not support the refresh models at this time
@KARLGreeneyezMADPLUME
@KARLGreeneyezMADPLUME 3 ай бұрын
@@edgeproductsman WHEN will you develop something for refreshed?
@terikalimari
@terikalimari 4 ай бұрын
I’m thinking about buying this for my truck that is currently bone stock, and I’m wondering what screen or gauges I would use to monitor to make sure everything is good. Any recommendations?
@edgeproductsman
@edgeproductsman 4 ай бұрын
You could pair this device with our Insight CTS3, but you can also look at your Juice with Attitude CTS3 device for your application
@keithwallace5698
@keithwallace5698 4 ай бұрын
Any idea on when the pulsar V3 will be available for the 2024 6.6L Duramax ?
@edgeproductsman
@edgeproductsman 4 ай бұрын
We don't have an eta on Pulsar for the 2024+ application, but we will have a power adder device avaiable for that truck in July/August
@insteg8
@insteg8 4 ай бұрын
Even though the flash tuning is dealer detectable, is it easy to return to stock configuration?
@edgeproductsman
@edgeproductsman 4 ай бұрын
Yes! you can return to complete factory setting in minutes
@cobieblack6558
@cobieblack6558 5 ай бұрын
So i’m interested and have a few questions. With springs, big injectors, and turbo, will this box allow 4k + rpm?
@rileyhogan9734
@rileyhogan9734 4 ай бұрын
I myself haven’t been able to see 4K+
@51tinfante
@51tinfante 5 ай бұрын
How will this CTS3 Evolution work with my truck I have a 21 Silverado 5.3 with the 8 speed I did the 6.2 L86 port and polish intake and throttle body swap with the aftermarket cold air intake
@edgeproductsman
@edgeproductsman 4 ай бұрын
our calibrations were built on 100% stock trucks, but the modifications you've made should only improve their output
@51tinfante
@51tinfante 4 ай бұрын
@@edgeproductsman which tune setting do you recommend with All that I’m planning on adding the Borla s-type catback exhaust I was thinking the sport with soft shift I’m not planning on doing any racing of that nature just wanna wake it up
@edgeproductsman
@edgeproductsman 4 ай бұрын
@@51tinfante the catback exhaust system should require no changes to our calibrations within the device, any of them will work great for you. The higher the octane, the better!
@gusmarantos5158
@gusmarantos5158 5 ай бұрын
Damn, thing burns pretty clean too not a whole lot of smoke
@-jeffreybollenbach-
@-jeffreybollenbach- 5 ай бұрын
Does the app work with an older computer box?
@edgeproductsman
@edgeproductsman 5 ай бұрын
I'm not sure I understand what you mean by 'older computer box'?
@-jeffreybollenbach-
@-jeffreybollenbach- 5 ай бұрын
@@edgeproductsman sorry didn't type that right. Does it work with an older comp box?
@edgeproductsman
@edgeproductsman 5 ай бұрын
@@-jeffreybollenbach- No, the phone app is specific to the latest Comp box. The older Legacy versions do not have that technololgy