R.I.P. Alex Trebek

Illegal to use Verizon's 😂😂

Thanks for this. Will save me some money too!

At 10:29 in the video your entering the power plant. I was an operator in that plant back in 1984. I remember watching the local news one night and seeing the power plant smoke stack being blown up. That video footage must exist somewhere?

I've heard some say that putting diswashing liquid on a wire being fished thru can be a helpful lubricant. I'd like to know not so much is it effective, but is it SAFE to use on Romex in a conduit, or for UF wire in a conduit? It won't eat up my wire over time?

I have a 12" section of 2.5" steel pipe with a 1/8" thick wall that i need to take a mm off the inside wall. Could you maybe suggest a way i could etch it off?

If anyones tv audio port has snapped it's possible to fix with cooper tape as I've just managed it tbf my tv is old so it was sooner or later I've got a old School LG 42 inch

I am going to do a carboy

Hope you ran single mode fiber. If you have power at the other end you can have some access points or cameras.

I have the exact mallet and mine is hard as a rock, im trying to learn how to bring it back to life. The green tag on yours is in way better shape than mine is.

Hammer drill function on the glass screws is awesome! 😆

Hello Sir, this is very educational. How to make etching solution btw?

Hello. In your opinion, can this be repaired or does the mechanism need to be replaced? kzbin.inforMJ4_hD47G8

Very interesting thanks for posting this! 🙂

But isn’t your vinyl cutter basically a micro size cnc router? 🤔

Hi! would this also work with older Pi models? Would love to use as little power and space as possible by using simpler models like the Raspberry Pi Zero 2 W or the Raspberry Pi 3 A+

Always wondered how deep etching can go. I have a few idea for logo plaques that would be difficult to engrave with a mill or router, can't laser cut the letters either cus then the middles of O's for example would fall out and i don't want supports. The hope was to get the mass of the letters out so i have a bit of depth to fill with something for a nice contrast to the stainless plate. If all goes to shizzle i could just do what knife makers do and etch the logo, cold blue, and then sand the surface.

Do you know if scotch Brite removes laser engraving?

You love it 😂

So, SO many morons!!😂😂😂

So what am I supposed to do if my window motor is dead and I can't lower it

So relaxed not BS . Keep up the great work.

Classic 😂

Thank you. Very helpful. Im removing some old double pain windows in the porch. I want to reuse the glass to make diamond shape leaded glass panels to insert on each side of the replacement window.

Conduit is very expensive, look for direct burial cable. You can also use water pressure to push a string rabbit through the pipe. Using dish liquid for lube works miracles as well.

Best $15 upgrade you can do to the Smock. It's not a night and day difference but you can definitely tell its smoother.

Tq bro,akan aku coba,bermanfaat sekali👍👍

At least he's not working in a factory.

Yeah, the answer is right.

Very cool 😎

Lube lube lube

How did you remove the mask?

What was in the solution you used?

Seriously? You could see the bag, so why didn't you use a fish tape with a hook to grab the bag?

I have some questions please. 1. How important is the temperature of the water ? 2. Does the sacrificial part have to be that big, don't you just need contact for the current to flow through the solution ? 3. Does the sacrificial part have to be of the same material as the part being etched ? Then lastly I think brushing it with a paint brush every so often will get rid of the bubbles or you can have a mechanism slowly rocking it so the solution rushes over the part and getting rid of the bubbles.

Who'd've thought he'd eventually be the host for Jeopardy.

I love watching homeowners struggle :)

Rake and hoe seem interchangeable and, while both are correct, rake is less commonly used in the US. I think Ken got the wrong end of the “long-handled gardening tool” on this one. If, perhaps, they had engendered the answer-rake being male and hoe being female-then the question would have been more obvious.

kandahh!

My favorite part, best Jonah Hill moment ever.

BONSAI!!!!! -Gordon Cole

I know it's too late for this project. I am an electrical contractor for over 30 years. If you use nylon string that is shown in this video, you will have a potential problem with cutting into the conduit wherever there is a 90, if that happens the string will break and cause a cut line in your conduit, and some major problems for your conduit run. The best thing to use is what they called jet line. It's a flat nylon pole string made for exactly what he is attempting to do. And to get the jet line through the conduit, if you can create a strong seal on one end of the conduit in a vacuum, a good vacuum will pour the jet line through. I'm glad all went well for this gentleman.

Try using a tripod next time.

pro-tip, if u use a wet sponge between the two electrodes in stead of the huge water bath it would lower the resistance significantly resulting in much efficient and faster result

is there a way to setup it without the raspberry pi camera, and use a usb camera instead?

I have skiffs with the 2nd detent ball in both my Smocks, there is definitely a difference smoother and more solid at the pivot

Only Ken Jennings would sacrifice a winning answer for a good joke. 🤣🤣🤣

I❤️ THIS VEDIO 👍🤗... WHICH WILL SAVE LOT OF TIME AND MONEY 😊😊😊GREAT GOOD FOR SLAB ALSO

I just discovered that I years ago put in wrong color wire in a 100-foot 1" half conduit wondering if I should pull it all out and redo it or leave it. There is white tape on the neutral, but not legal. It was before I knew what I was doing with electrical work.